Grove

Available
Electronics

Grove – Serial Camera

SENSESGROCAM
€45.00
Serial Camera v0.9b is a JPEG color camera module easy for MCU use.It has integrated image processing DSP to generate 320*240 or 640*480 JPEG image without thumbnail information, captured picture will be stored in internal buffer and transferred via UART port.
2
Available
Electronics

Grove - 3-Axis Digital Compass

GROSED3AXIDC
€14.70
3-Axis Compass module, a member of grove family uses I²C based Honeywell HMC5883L digital compass. This ASIC is equipped with high resolution HMC118X magneto-resistive sensors and a 12-bit ADC. It provides compass heading accuracy up to 1° to 2°. Signal conditioning like amplification, automatic degaussing strap drivers and offset...
Available
Electronics

Grove - Dust Sensor

SENSESGRODUST
€18.00
Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room.
2
Available
Electronics

Grove - 3-Axis Digital Accelerometer(±400g)

GROSED3AXDA400
€26.95
The H3LIS331DL is a low power high performance 3-axis linear accelerometer belonging to the “nano” family, with digital I2C serial interface standard output. The device features ultra low power operational modes that allow advanced power saving and smart sleep to wake-up functions. The H3LIS331DL has dynamically user selectable full scales of...
2
Out of stock
Electronics

Grove - EMG Detector

SEDGROEMGSEN
€41.67
EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes. In standby mode, the output voltage is 1.5V. When detect muscle...
View
2
Out of stock
Electronics

Non Blind Zone Ultrasonic Module SDM-IO

iTeadStudio
SENITEUSRSDMIO
€14.50
Non Blind Zone Ultrasonic Module SDM-IO is a stable and measure the distance accurately ultrasonic module which provides 0cm - 1500mm non-contact measurement function,the ranging accuracy can reach to 3mm. Its performance can compare with SRF05/SRF02 ultrasonic distance measuring module, also it has non-blind design and fast response.
View
2
Out of stock
Dev. Tools

Grove Mixer Pack V2

Seeed Studio
SENSESGROMIXPACV2
€40.83
The Grove - Mixer Pack is stand-alone,Lego-like electronic.The Mixer Pack consists of 13 mini modules,there are Power,Logic,Sensors and Actuators, It is a group of Grove compatible modules designed for quickly building functional prototypes. They are tiny, colorful modules that are accessible and fun for children.With this kit you can integrate circuits...
View
Out of stock
Electronics

Grove – Air quality sensor

SENSESGROAIR
€16.00
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases.
View
2
Available
Electronics

Electronic Brick Vibration Sensor Module for...

SENITETILT2
€2.00
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
2
Out of stock
Electronics

Grove - GPS

SENSEDGPSGRV
€29.26
This Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 (U-blox 6 is old version) and serial communication configuration. It features 22 tracking / 66 acquisition channel GPS receiver. The sensitivity of tracking and acquisition both reach up to -160dBm, making it a great choice for personal navigation projects and...
View
2
Out of stock
Grove

Grove - Infrared Receiver

SEDGROIRREC
€4.00
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter.
View
2
Available
Display

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
€3.50
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
Out of stock
Display

Grove - OLED Display 96*96 (screen)

Seeed Studio
OLEDSESOLE42178P
€14.17
Twig/Grove - OLED 96x96 twig is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Twig - OLED 96x96 is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim / thin outline,...
View
2
Out of stock
Electronics

Grove – I2C Touch Sensor

SENSESGROI2CTOUCH
€20.92
The I2C Touch Sensor is based on FreeScale MPR121, to feel the touch or proximity of human being fingers. This sensor include 2 parts: one Touch Sensor controller, and 4 finger feelers. Insert the connectors of feelers into base of Sensor controller, you can begin your touch controlling.
View
2
Out of stock
Grove

Grove - GSR

SENGROGSR
€8.25
GSR, standing for galvanic skin response, is a method of measuring the electrical conductance of the skin. Strong emotion can cause stimulus to your sympathetic nervous system, resulting more sweat being secreted by the sweat glands. Grove – GSR allows you to spot such strong emotions by simple attaching two electrodes to two fingers on one hand, an...
View
2
Available
Electronics

Grove - Speech Recognizer

SNDGRONIZER
€26.00
Use voice to interact with things around you can always be one of the most interesting things of IoT application, we want to make something more different and cooler
Out of stock
Electronics

Grove - 433MHz Simple RF link kit

SESWLS01052O
€7.00
This kit is used for one way wireless communication at a frequency of 433MHz and includes a transmitter module and a receiver module. The twig configuration of this kit allows for around 40 meters of transmitting distance indoors, or around 100 meters outside.
View
2
  • Reduced price / -€11.00
Available
Electronics

Sensor Kit for Arduino and Raspberry pi

SESTAOBRSK
€30.67 €41.67
This is a Starter kit of electronic brick; it includes basic components and sensors. You can build many interesting projects even if you don't know anything about soldering that makes it the best choice for beginners.
Available
Electronics

Electronic Brick - Sound Sensor/Microphone Brick

SENITESNDMIC
€2.50
Electronic brick of microphone can be connected to the analog I / O port, when speaking to the microphone, the analog value will be changed. A recorder can be made by reading and saving the analog value.
2
Out of stock
Dev. Tools

Base Shield V2

Seeed Studio
ASHSESBASE
€8.00
As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.
View
2
Available
Display

Grove - OLED Display 128*64 (screen)

Seeed Studio
OLEDSEDDISP12
€14.17
LED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It has bigger screen and uses all the columns from the...
2
Available
Electronics

IR Distance sensor 80 cm Analogique grove

Seeed Studio
SENGROPROX
€14.00
The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). Can be used in TVs,personal computers ,cars and so on.
2
Out of stock
Electronics

Grove - Speaker

SNDGROSPK
€6.67
The Grove - Speaker is a module consist of power amplification and voice outputs. The loudness can be adjusted by the on-board potentiometer. With different input frequency, the loud-speaker generated different tones. Coding the music into arduino, DIY your own music box!
View
Available
Grove

Grove - Infrared Emitter

SEDGROIREMI
€4.00
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side . An infrared LED is like any other LED, with its color centered around 940nm. We can use the emitter not only to transmit data or commands, but also to emulate remotes to control your home appliance...
Grove
Product added to wishlist
Product added to compare.