Grove

 2
Available
Outils de dev.

Sensor Shield V5.0 pour Arduino (servos)

ECRACS04525S
8,25 €
Latest Arduino sensor Shield V5.0 reserves advantages of Arduino Sensor V4.0,such as lamination design, PCB immersion god process, and main board extend all the figures and analog interfaces of Arduino controller. I2C interface, 32 steering engineer controller interface, Bluetooth module communication interface ,SD card module communication interface,...
 2
Out of stock
Electronique

Non Blind Zone Ultrasonic Module SDM-IO

iTeadStudio
SENITEUSRSDMIO
14,50 €
Non Blind Zone Ultrasonic Module SDM-IO is a stable and measure the distance accurately ultrasonic module which provides 0cm - 1500mm non-contact measurement function,the ranging accuracy can reach to 3mm. Its performance can compare with SRF05/SRF02 ultrasonic distance measuring module, also it has non-blind design and fast response.
 2
Out of stock
Electronique

Grove – I2C Touch Sensor

SENSESGROI2CTOUCH
20,92 €
The I2C Touch Sensor is based on FreeScale MPR121, to feel the touch or proximity of human being fingers. This sensor include 2 parts: one Touch Sensor controller, and 4 finger feelers. Insert the connectors of feelers into base of Sensor controller, you can begin your touch controlling.
Out of stock
Electronique

Grove – Temp & Humi Sensor

SENSESGROTMPHM
7,00 €
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability and long term stability. Please note that this sensor will not work for temperatures below 0 degree.
Out of stock
Electronique

Grove – Air quality sensor

SENSESGROAIR
16,00 €
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases.
 2
Available
Affichage

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
3,50 €
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
 2
  • Prix réduit / -11,00 €
Available
Electronique

Sensor Kit for Arduino and Raspberry pi

SESTAOBRSK
30,67 € 41,67 €
This is a Starter kit of electronic brick; it includes basic components and sensors. You can build many interesting projects even if you don't know anything about soldering that makes it the best choice for beginners.
Available
Electronique

Grove - Dust Sensor

SENSESGRODUST
18,00 €
Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room.
Available
Electronique

Grove – Serial Camera

SENSESGROCAM
45,00 €
Serial Camera v0.9b is a JPEG color camera module easy for MCU use.It has integrated image processing DSP to generate 320*240 or 640*480 JPEG image without thumbnail information, captured picture will be stored in internal buffer and transferred via UART port.
 2
Out of stock
Outils de dev.

Base Shield V2

Seeed Studio
ASHSESBASE
8,00 €
As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.
Out of stock
Electronique

Grove - 433MHz Simple RF link kit

SESWLS01052O
7,00 €
This kit is used for one way wireless communication at a frequency of 433MHz and includes a transmitter module and a receiver module. The twig configuration of this kit allows for around 40 meters of transmitting distance indoors, or around 100 meters outside.
 2
  • Prix réduit / -11,00 €
Out of stock
Senseurs

Fingerprint Sensor (Grove)

SENSEDGROFING
44,00 € 55,00 €
The Fingerprint Sensor is one optical fingerprint sensor which will make adding fingerprint detection and verification super simple.There's a high powered DSP chip AS601 that does the image rendering, calculation, feature-finding and searching. You can also enroll new fingers directly - up to 162 finger prints can be stored in the onboard FLASH memory....
 2
Out of stock
Electronique

Grove - Serial MP3 Player v2

Seeed Studio
SENGROSERMP3
12,72 €
Grove-Serial MP3 Player is a kind of simple MP3 player device whose design is based on a high-quality MP3 audio chip---WT5001. It can support 8KHZ~44.1KHZ sampling frequency MP3 and WAV file formats. This product has several peripheral ports: a standard UART Grove interface, a dual track headphone jack, an external interface and also a Mini SD card...
 2
Out of stock
Outils de dev.

Grove - Starter Kit for Arduino (Arduino...

Seeed Studio
SENSESGROSTAPLU
49,17 €
Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your idea buds.   This Grove - Starter Kit for Arduino is upgraded version of our Grove Starter Kit plus. We included more...
 2
Out of stock
Electronique

Grove - Télémètre à Ultrason

Seeed Studio
ULTSEEGROVEULTRA
12,00 €
This Grove-ultrasonic sensor is a non-contact distance measurement module which is compatible with the Grove system. It’s designed for easy modular project usage with industrial performance.   Video available here
 2
Available
Electronique

Grove - DMX512

CONGRODMX512
8,00 €
The Grove – DMX512 is a adapter from Grove interface to DMX512 interface(industry standard EIA-485 interface. The module is based on SN75176 chip which can balance transmission lines and meet ANSI Standard EIA-485 interface. Now It is convenience to control stage lighting and DMX512 console for Arduino.
 2
Out of stock
Grove

Grove - GSR

SENGROGSR
8,25 €
GSR, standing for galvanic skin response, is a method of measuring the electrical conductance of the skin. Strong emotion can cause stimulus to your sympathetic nervous system, resulting more sweat being secreted by the sweat glands. Grove – GSR allows you to spot such strong emotions by simple attaching two electrodes to two fingers on one hand, an...
 2
Available
Electronique

Grove - Enregistreur et Lecteur Audio

SNDGROREC
20,00 €
Grove - Recorder is based on ISD1820P, which can record 8~20 sec by set resistor and cycle play. It can offers true single-chip voice recording, no-volatile storage. Grove - Recorder is 100K and the total 10s for Recorder. This module is very easy to control, which can direct control by push button on board or by microcontroller.
 2
Out of stock
Electronique

Mega Proto Screw Shield (Shield Grove, Xbee,...

ASHMEGPROTOSCR
12,50 €
Mega Proto Screw Shield breaks out all pins of Arduino Mega 2560 and some of the pins are extended to 3.5mm-spacing screw terminals. Besides, it is equipped with 2.54 pitched universal electronic brick interface, 4-pin grove electronic brick interface as well as XBee interface for pins D0 ~ 21 and A0 ~ 15, which is a great help to design of our...
 2
Out of stock
Outils de dev.

Grove Mixer Pack V2

Seeed Studio
SENSESGROMIXPACV2
40,83 €
The Grove - Mixer Pack is stand-alone,Lego-like electronic.The Mixer Pack consists of 13 mini modules,there are Power,Logic,Sensors and Actuators, It is a group of Grove compatible modules designed for quickly building functional prototypes. They are tiny, colorful modules that are accessible and fun for children.With this kit you can integrate circuits...
 2
Out of stock
Electronique

Grove - Speaker

SNDGROSPK
6,67 €
The Grove - Speaker is a module consist of power amplification and voice outputs. The loudness can be adjusted by the on-board potentiometer. With different input frequency, the loud-speaker generated different tones. Coding the music into arduino, DIY your own music box!
 2
Available
Accueil

Grove - Mega Shield

Seeed Studio
SEDGROMEGASHI
10,00 €
Mega Shield is a extension board for Arduino Mega, DUE and Google ADK.
 2
Available
Electronique

Grove - 80cm Infrared Proximity Sensor

Seeed Studio
SENGROPROX
14,00 €
The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). Can be used in TVs,personal computers ,cars and so on.
 2
Available
Accueil

Grove - Bee Socket

SEDGROBEESOCK
7,00 €
Grove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bluetooth Bee, etc. It is Arduino compatible and more effective to conduct peer-to-peer operations and mesh network runned by wireless modules. Regulator CJT1117 guareteens Xbee of stable 3.3 voltages. LEDs can reflect working modes...
 2
Out of stock
Electronique

Grove - EMG Detector

SEDGROEMGSEN
41,67 €
EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes. In standby mode, the output voltage is 1.5V. When detect muscle...
 2
Out of stock
Grove

Grove - Infrared Receiver

SEDGROIRREC
4,00 €
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter.
 2
Available
Accueil

Grove - 3-Axis Digital Gyro

SEDGRODIGGYR
19,92 €
Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes.
Product added to wishlist
Product added to compare.