Motors and Servos

Available
Motorized

DC 20000RPM K30 DC Motor

MOTSEDK3020C
€3.00
This motor with small size and less weight, low power. It can output enough force to make some model like mini aircraft and robot platform.
 2
Available
Robots

DFRobot Robotic Spider Chassis Kit ROB0103

ROBDFRSPID
€8.25
Description      Design and build a robotic creature full of energy      Eight multi-jointed legs accurately replicate the walking motion of a real spider      Two mounting choices to let you change stride length and spider gait
 2
Available
Motorized

M5STACK U102 - SG92R Holding unit, robotic gripper

ECGM5STU102
€5.75
Catch is a gripper that uses a SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasing operations. The structure adopts a design compatible with Lego 8mm round holes. You can combine it with other Lego components to build creative control structures, such as robotic...
 2
Available
Robots

2WD Smart car kit, smart line tracking, engine,...

ROB2WDELECKIT
€12.50
This a well designed, Arduino compatible mobile robot development platform,you can build it and program it easily with tons of published free codes. Compare with the last mobile platform, this one has a light body with mounting holes, you can add Variety of sensors to make it more interesting.
 2
Available
Grove

M5Stack Watering Unit with Mositure Sensor and...

M5SGROVPUMP
€10.00
Watering is a capacitive soil moisture detection and adjustment unit. The product integrates water pump and measuring plates for soil moisture detection and pump water control. It can be used for intelligent plant breeding scenarios and can easily achieve humidity detection and Irrigation control. The measurement electrode plate uses the capacitive...
 2
Available
Grove

Grove - 16-Channel PWM Driver (PCA9685)

Seeed Studio
GROPWM16C
€11.25
Grove – 16-Channel PWM Driver (PCA9685) is a 12-bit PWM driver based on the NXP PCA9685 and can drive up to 16 servos with an external power supply of 5V. 
 2
Available
Robots

4-DOF Metal Robot Arm Kit for Raspberry Pi,...

ROBWS4DOF
€50.00
Equip your Raspberry Pi with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic. This starter robotic arm kit includes: servo driver HAT, metal mechanical arm structure, and 4x metal gear servos. When used with the Raspberry Pi, it is easy to control the arm by smart phone through Bluetooth or WiFi connection.
 2
  • Reduced price / -€3.10
Out of stock
Electronics

SM24240, Two-Phase Stepper Motor (NEMA 17)

STEWS24240
€11.90 €15.00
This is a simple and bi-polar stepper motor, it is what you need for your Reprap, Makerbot and other 3D Printers or CNC or Laser or Plasma cutter 
 2
Available
Motors and Servos

EC3 Plug connectors M/F

CONEC3MF
€2.08
The best battery connectors on the market just got better with the development of the EC3, also called the EC3 The new EC3 features snap on insulating end caps which provide extra grip and heart-shrink free installation. They also have a design change which is far more user-friendly for connection and disconnection with an improved integrated grip area. 
 2
Available
Motorized

FPV Bracket Kit with 2 servo SG90 (Robotique)

MECFPV9GBRA2
€16.67
This is the FPV Bracket Kit with 2 9g Servo, with the help of this product, it would be easy for you to create 3-axis projects such as environment monitoring, tracking. It would be you good partner in servo related projects.
Available
Motorized

TR_P10A Plush 10A Brushless Speed ​​Controller

MOTASCTP10A
€12.08
Plush 10A Brushless Speed ​​Controller La série Peluche ESC sont un contrôleur de haute qualité bien connue des amateurs expérimentés. Ils ont un large éventail de fonctions de programmation couplés avec la réponse de l'accélérateur en douceur qui en fait le go-to ESC pour ceux qui savent. Nos contrôleurs de vitesse TURNIGY viennent avec une garantie de...
 2
Available
Dev. Tools

SSC-32U USB 32 Servo Controller Atmega 328P

ECRACSPWM32
€33.33
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
 2
Available
Prototyping

Servo head bracket two degrees bracket set...

ROBJANGRIP
€8.25
This tiny gripper uses a rack-and-pinion design with a servo-driven pinion and opposing racks to keep the gripper's paddles synchronized and parallel to each other throughout its 55mm range of motion.
 2
Out of stock
Robots

POLOLU MICRO GRIPPER KIT WITH POSITION FEEDBACK...

ROBPOLGRIPKIT
€18.33
This small gripper uses a rack and pinion design with a servo-driven pinion and opposing racks to keep the gripper paddles synchronized and parallel to each other throughout its 32 mm range of motion. It includes a special micro servo with an additional wire that gives access to its feedback potentiometer, so you can track the actual position of the...
 2
  • Reduced price / -€6.00
Available
Electronics

12VDC Medium Size Water Pump 6W

MOTWPUMP6W
€6.50 €12.50
Have you ever want to DIY an Aquarium controllers to help you Changing the water for the fish tank. This mini pump really sucks! This pump operates at 12V and has enough suction for most small projects. Use this pump to make a fountain or waterfall, even water your plants!
 2
Available
Electronics

DC 6V 2000RPM Mini Gear Motor 3mm JA6-N20 for...

MOTGENGEARED6V100RPM
€7.08
Gear (reduction) motor of pretty good quality, running at 2000rpm. All you need to do is connect the postive and negative pole-pin, simple enough for beginners.
 2
Available
Motors and Servos

XT60H / XT90 Plug connectors M/F

CONXT60HMF
€1.50
The best battery connectors on the market just got better with the development of the XT60H, also called the XT60+. The new XT60H features snap on insulating end caps which provide extra grip and heart-shrink free installation. They also have a design change which is far more user-friendly for connection and disconnection with an improved integrated grip...
 2
Available
Motorized

Micro-motor long-range 3.7 V 60000 to...

MOTTAO412
€3.00
This motor with small size and less weight, low power. It can output enough force to make some model like mini aircraft and robot platform.
 2
Available
Electronics

G1/4 Electric Solenoid Valve 2W MAX 10kg/cm²...

ELEFLYVALVE14
€12.42
This is a normally closed G1/4 12VDC electric solenoid valves with barbed inlet and outlet ports, great for projects involving low viscosity fluid control. You can find it ubiquitous on applications like automatic faucets, foot operated faucets, drinking fountains etc.
 2
Available
Electronics

Electric Door Lock B - DC 12V Open Frame Type...

MOTJANSDLOC2
€9.58
This solenoid in particular is strong, and has a slug with a slanted cut and a good mounting bracket. It's basically an electronic lock, designed for safe or door.
Available
Electronics

High Power Mosfet Drive Module, PWM Control

DRIELDHPW
€2.92
Using brand new double MOS AOD4184A parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment; Wide voltage, the perfect support for PWM; Easy control of power equipment.
 2
  • Reduced price / -€3.00
Available
Electronics

Electric Door Lock - DC 12V Open Frame Type...

MOTJANSDLOC
€6.58 €9.58
This solenoid in particular is strong, and has a slug with a slanted cut and a good mounting bracket. It's basically an electronic lock, designed for safe or door.
 2
Product available with different options
Electronics

L9110 Fan Module for Arduino

MOTJANFAN
€6.40
L9110 driver can control Reversible with mounting holes compatible steering rudder propeller control quality and high efficiency. 20cm making it easy to blow out the flame can be used outside of the fire lighter robot, robot design and development of essential
 2
Available
Electronic drivers

TB6560 Motor driver (max 3A, 10-35v motor,...

MDRTB65603A
€10.00
A quite powerful motor driver, taking from 12v to 24v as input. It even has opto-couplers to separate your driving electronics from the motor power.
Out of stock
Electronics

DC framework solenoid HCNE1-0520

MOTSOLHCNE10520
€12.50
This 12-Volt DC framework solenoid is great for projects! These types of solenoid are often used for automatic door locks,vending machines,robot etc. However, they work great for almost any project requiring a DC solenoid.
 2
Available
Electronics

DRV8825 stepper motor driver with heat sink...

MDRDRV8825
€6.25
This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet (1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil (see the Power Dissipation Considerations section below for...
 2
Available
Electronics

130 DC Motor

SEDMOT130DC
€3.17
This is Neodymium magnetic motor, High quality commutator and bigger brushs. With large output force and high speed, very suitable for making robot car.
 2
Available
Electronics

G1/2 Electric Solenoid Valve (Normally Closed)

SEDELECVALVE
€8.33
This is a normally closed G1/2 12VDC electric solenoid valves with barbed inlet and outlet ports, great for projects involving low viscosity fluid control. You can find it ubiquitous on applications like automatic faucets, foot operated faucets, drinking fountains etc.
 2
Out of stock
Dev. Tools

MotoMama - L298N H-Bridge Motor Driver Shield

MOTDRIITEMOTMAM
€12.50
MotoMama is a motor drivers shield for Arduino, based on L298N H-bridge driver chip. You can use this shield to drive two DC motors or an four-wire two-phase stepper motors with Arduino boards.
 2
Out of stock
Motorized

Motor Shield Arduino compatible – VNH2SP30

ASHSESMOTV2
€16.58
Description This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We’ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm...
 2
Available
Electronics

Mini Water Pump 2.5 – 6V 0.5W

MOTMINIWATPUMP
€5.42
Have you ever want to DIY an Aquarium controllers to help you Changing the water for the fish tank. This mini pump really sucks! This pump operates at 3V~9V and has enough suction for most small projects. Use this pump to make a fountain or waterfall, even water your plants!
 2
Available
Motorized

FPV Bracket Kit For 9g Servo (Robotique SG90 MG90)

MECFPV9GBRA
€7.08
This is the FPV Bracket Kit For 9g Servo, with the help of this product, it would be easy for you to create 3-axis projects such as environment monitoring, tracking. It would be you good partner in servo related projects.
  • Reduced price / -€1.50
Available
Electronics

A4988 stepper motor driver with heat sink...

MDRA4988
€4.75 €6.25
The A4988 stepper motor driver carrier is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase...
 2
Available
Robots

2WD Light Mobile platform (ideal for Arduino)...

ROB2WDACRENC
€10.00
This a well designed, Arduino compatible mobile robot development platform,you can build it and program it easily with tons of published free codes. Compare with the last mobile platform, this one has a light body with mounting holes, you can add Variety of sensors to make it more interesting.
 2
Available
Home

Dual stepper motor shield

iTeadStudio
ASHITEDUASTE
€11.58
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine.
 2
  • Reduced price / -€3.50
Available
Electronics

28BYJ-48 High quality Stepper motor 5V

MOTITE28BYJ485V
€3.50 €7.00
Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc., Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95
 2
Available
Electronics

Mini vibration motor

Seeed Studio
MOTSESVIB
€3.00
This is a very nice toy, a small vibration motor just like your smartphone's one !
 2
  • Reduced price / -€6.00
Available
Motorized

Brushless Outrunner Motor A2212/13 1000 KV,...

MOTA221213
€9.00 €15.00
Brushless Outrunner Motor A2212/13 1000 KV, 47G, 12A Small size and light weight. 3mm hardened steel shaft, dual ball bearings. Includes collet type prop adapter and radial motor mount.
  • Reduced price / -€2.00
Available
Electronics

ULN2003 Stepper Motor Driver Board

iTeadStudio
MDRULN2003
€2.58 €4.58
ULN2003 Stepper Motor Driver Board is use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motors (5v-12v).
 2
Available
Electronics

EasyDriver allegro stepper motor driver

MDREASYDRIVER
€5.00
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and...
 2
Available
Electronics

DC 12V 1000RPM Mini Gear Motor 3mm JA12-N20

MOTGENGEARED6V70RPM
€7.08
Gear (reduction) motor of pretty good quality, running at 1000rpm. All you need to do is connect the postive and negative pole-pin, simple enough for beginners.
 2
  • Reduced price / -€3.50
Available
Electronics

28BYJ-48 High quality Stepper motor 12V

MOTGENSTEP12V
€3.50 €7.00
Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc., Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95
Available
Electronics

L298 Dual H-Bridge Motor Driver

SESMOT103B1M
€6.67
If you are building a robot with wheels, you need a dual H-Bridge driver like this one. Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive...
Product added to wishlist
Product added to compare.