Storage & Batteries

 2
  • New
Available
Power and Energy

USB Plug 18650 Battery Charger

ENEYONIC1
€5.75
18650 Universal Battery Charger  For Rechargeable Batterie USB Batterie Compatible modèle: 10440 14500 16340 16650 14650 18350 18500 18650
 2
Available
Electronics

Lithium Polymer Battery - 320mAh 3.7V

ENEBATLP303040
€5.75
This is a light weight, high energy density polymer lithium battery. It outputs a nominal 3.7v at 980mAh, including built-in protection against over voltage, over current, and minimum voltage. It comes terminated with a standard 2-pin JST connector-2.54 mm spacing between pins. Please do not attempt to charge these with anything but a specialized Lithium...
 2
Available
Power and Energy

USB Plug 18650 26650 Battery Charger

ENETAO168
€11.67
18650 Universal Dual  Battery Charger  For Rechargeable Batterie USB Batterie Compatible modèle: 10440 14500 16340 16650 14650 18350 18500 18650
Available
Electronics

Battery Holder - 1 x AA

ENEITEBOX1AA
€1.58
A prototype AA battery case, it has on/off switch on the case, and it can be fully closed by cap and further screw it to close, so it’s very well protected.
Available
Power and Energy

Battery Charger Lipo by Solar Powered System or...

ENESOLCHA
€6.25
solar Chip Features: Constant-current /constant voltage linear charger for single cell Li-ion and Li Polymer rechargeable batteries Suitable for Solar-Powered System Automatic Low-Power Sleep Mode When Input Supply Voltage is Removed on-chip power MOSFET and eliminates the need for the external sense resistor and blocking diode. An on-chip 8-bit ADC can...
 2
Available
Electronics

Battery Holder Keystone - 2xAAA for solder

HOLJAN2AAAS
€2.00
The 2xAAA Battery Holder puts a nice finishing touch on your battery powered project. It can provide about 3V(2x1.5V) Voltage power for your project. It is series connection.
Available
Power and Energy

Lithium battery CR 1220

BATLITCR1220
€1.25
Pile: lithium; 3V; CR1220; Nb.de piles:5; Ø12x2mm; 35mAh
 2
Available
Electronics

Battery Holder - 2xAAA

HOLITE2AAA
€2.00
The 2xAAA Battery Holder puts a nice finishing touch on your battery powered project. It can provide about 3V(2x1.5V) Voltage power for your project. It is series connection.
Available
Home

Lithium Polymer Battery - 3900mAh 3.7V (SONY...

ENEBATUS417799
€14.17
This is a light weight, high energy density polymer lithium battery. It outputs a nominal 3.7v at 3900mAh, NOT including built-in protection against over voltage, over current, and minimum voltage. Please do not attempt to charge these with anything but a specialized Lithium Polymer charger.
 2
Available
Electronics

Battery Protection Bags (30x23cm)

BAGJANLIPO
€6.67
This is a fireproof bag, designed to stop and contain any fire caused by incorrectly charging or poorly functioning lipo packs.
Product added to wishlist
Product added to compare.