Arduino

 2
Available
Dev. Tools

Iboard

iTeadStudio
MCBITEIBOARD
€33.00
Iboard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328. This board will add wireless XBee / nRF24L01+ control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless! Iboard can be used as an...
 2
  • Reduced price / -€2.44
Available
Arduino

Bees Shield

Seeed Studio
SESINT119B2P
€6.67 €9.11
Bees shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. Aside from dual Bee style 20p 2.0 pitch socket, it also has large proto area, customizable software, serial, port for easier prototyping.
 2
Available
Dev. Tools

Iboard Pro

iTeadStudio
MCBITEIBOARDPRO
€41.40
The Iboard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation...
 2
  • Reduced price / -€10.00
Available
Dev. Tools

Danger Shield Complete kit

Seeed Studio
ASHDANGER
€15.00 €25.00
The Danger Shield is an add-on for the Arduino. It contains a variety of fun and useful electronic circuits that you can use to do fun and useful things. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No extra things to hook up, no external components. Just a really rad board ready to rock.
 2
Available
Dev. Tools

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
€3.92
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
 2
  • Reduced price / -€7.70
Available
Dev. Tools

AVR Programmer Arduino Shield

PRGELDAVRSHD
€7.05 €14.75
This is AVR programmer, designed as a arduino shield. In this way, you can program most of the AVR ICs with arduino IDE and using arduino board as ISP. The AVR Programmer Shield allows you to program ATtiny and ATmega microcontrollers using your Arduino. Instead of pulling out the breadboard and wiring everything up every time you want to (re)program a...
 2
Out of stock
Dev. Tools

Seeeduino Mega

SESARD121D2P
€24.17
In the pursuit for small form factor, flexibility and functionality comes Seeeduino Mega – derived from Arduino Mega it harnesses the power of ATmega1280 to spice up your project building experience. ATmega 1280 @ 16MHz Selectable 5V/3.3V operation 70 Digital IO 16 Analog inputs 14 PWM outputs 4 Hardware serial ports Compatible with most Arduino Shields...
 2
Out of stock
Dev. Tools

Music Player Shield for Arduino (MP3, SD card,...

iTeadStudio
ASHITEMUSPLA
€20.00
The iTead Music Player Shield is based on CECL08D. The CECL08D chip can be used to decode MP3/WAV format audio file. The music player shield has SD card socket and USB interface, supporting USB and SD card play. Just plug and play!
 2
  • Reduced price / -€1.10
Available
Dev. Tools

TEA5767 Radio FM Stereo Module for Arduino...

FMTAO5767
€8.07 €9.17
LC harmonic oscillator use low cost fixed chipNo need to adjust Intermediate frequencyHigh sensitivity(low noise RF input amplifier)High power auto gain control AGC circuitSoft mute
 2
Available
Arduino

LilyPad Arduino USB (Arduino Compatible)

Arduino
MCBARDLILYUSB
€19.17
The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4 (datasheet). It has 9 digital input/output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains everything needed to support the microcontroller;...
 2
Available
Dev. Tools

Sensor Shield V5.0 For Arduino (servos)...

ECRACS04525S
€8.25
Latest Arduino sensor Shield V5.0 reserves advantages of Arduino Sensor V4.0,such as lamination design, PCB immersion god process, and main board extend all the figures and analog interfaces of Arduino controller. I2C interface, 32 steering engineer controller interface, Bluetooth module communication interface ,SD card module communication interface,...
 2
Available
Dev. Tools

Sensor Shield V4.0 For Arduino (Arduino...

ECRMCS01002S
€7.00
Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm...
 2
Available
Dev. Tools

Screw Shield with Protoboard (Aduino Compatible)

ECRMCS01110
€8.33
The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and a 5mm green LED.
 2
  • Reduced price / -€3.50
Available
Dev. Tools

FunDuino UNO (ATMega 328P board compatible with...

MCBFUNUNO
€12.50 €16.00
The FunDuino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer...
Out of stock
Main Boards and Compatible

Digispark Attiny85 Micro USB Development Board...

MCBDISPAMICROUSB
€4.00
The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too...
 2
Available
Dev. Tools

nRF24L01+ 2.4Ghz RF module (improved range)

iTeadStudio
WIRITENRF24L01
€4.00
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
 2
Out of stock
Dev. Tools

Freeduino USB Complete KIT

SESARD107B1P
€15.80
You want to try arduino at a very small price and like to solder ? Look no more, and take that little soldering kit. You will make a complete and functionnal arduino board (freeduino flavor actually) in a little time : Freeduino USB complete Kit includes all the kits needed to assemble Freeduino. And now the Freeduino USB Kit comes with a mini USB-B...
 2
  • Reduced price / -€5.00
Out of stock
Dev. Tools

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
€7.00 €12.00
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
 2
  • Reduced price / -€8.10
Available
Dev. Tools

Iteaduino BT HC-05 (Arduino-compatible with...

iTeadStudio
MCB00001
€23.57 €31.67
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
 2
  • Reduced price / -€3.75
Available
Arduino

EL Shield

ASHSESEL
€20.00 €23.75
The EL Shield is another easy-to-use shield for your control of EL devices, fits with Arduino and Seeeduino. You will be able to control 4 EL devices simultaneously and separately. The controlling method is as simple as controlling an LED. Driven by PWM, it can create a colorful and florid effect by controlling each EL wire according to your own programs.
 2
Available
Arduino

CNC Shield for Arduino (GRBL Arduino Compatible)

ASHCNCGRBLKIT
€6.67
The Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4x A4988 or DRV8825 with this shield and an Arduino you can build all kinds of robotics or CNC projects including CNC routers, laser cutters and even pick&place machines. This is the KIT...
 2
Available
Dev. Tools

UNO R3 (Arduino Compatible ) CH340

MCB00003B
€9.00
The Uno is a microcontroller board based on the ATmega328 and compatible with the Arduino Uno R3. It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or...
Product added to wishlist
Product added to compare.