Inertial

 2
Available
Electronics

M5stack Grove U095 6 axes MPU6886 6DOF...

SENM5STU095
€7.42
6-Axis IMU Unit is a 6-axis attitude sensor with 3-axis gravity accelerometer and 3-axis gyroscope, which can calculate tilt angle and acceleration in real time. The chip adopts mpu6886, has 16 bit ADC, built-in programmable digital filter and on-chip temperature sensor, adopts I2C interface (addr:0x68) to communicate with host computer, and supports...
Available
Electronics

SW-520D Tilt Sensor Vibration Rolling...

SENANGTILT2
€0.58
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Available
Electronics

Vibration Rolling Angle Sensor Electronic Tilt

SENANGTILT
€0.42
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Available
Electronics

Accelerometer, 3 Axis, ADXL345BCCZ, I2C, SPI...

Analog Devices
SENITEADXL345SMD
€7.50
The ADXL345 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±16 g (!!!) with a 13bit resolution. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion,...
 2
Available
Electronics

6DOF BOSCH 6-axis Acceleration Gyro Gravity...

SENBSHBMI160
€6.50
The BMI160 is a small, low power, low noise 16-bit inertial measurement unit designed for use in mobile applications like augmented reality or indoor navigation which require highly accurate, real-time sensor data. In full operation mode, with both the accelerometer and gyroscope enabled, the current consumption is typically 950 μA, enabling always-on...
 2
Available
Electronics

Electronic Brick Vibration Sensor Module for...

SENITETILT2
€2.00
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
 2
Available
Electronics

Electronic Brick & Grove - Tilt Sensor/Switch...

SENITETILT
€2.50
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
 2
Available
Home

Grove - 3-Axis Digital Gyro

SEDGRODIGGYR
€19.92
Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes.
 2
Available
Sensors

Grove - Barometer Sensor (BMP085)

BARSEEGROVBAROM
€14.17
This Grove-Barometer Sensor features a Bosch BMP085 high-accuracy chip to detect barometric pressure and temperature. It can widely measure pressure ranging from 300hPa to 1100hPa, AKA +9000m to -500m above sea level, with a super high accuracy of 0.03hPa(0.25m) in ultra-high resolution mode.
Available
Electronics

Reed Switch

ECRSPM02102S
€0.92
The reed switch is an electrical switch operated by an applied magnetic field. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch. It consists of a pair of...
 2
  • Reduced price / -€6.00
Available
Electronics

ADXL345 Accelerometer breakout module Triple-Axis

iTeadStudio
SENITEADXL345
€4.00 €10.00
The ADXL345 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale rangethe static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
 2
Available
Sensors

BMP085 Digital Pressure Sensor Module (GY-65)

SENSEDBMP085
€7.92
BMP085 is a digital pressure sensor. Its absolute accuracy can reach 0.03hPa and power consumption is extremely low with current of only 1μA when operating in standard mode.
 2
Out of stock
Electronics

GY-61 ADXL335 Accelerometer breakout module...

iTeadStudio
SENITEADXL335
€8.00
*MMA7361L The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
 2
Available
Electronics

Freescale MMA7361L Accelerometer breakout...

iTeadStudio
SENITEMMA7361L
€9.00
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and...
Product added to wishlist
Product added to compare.