TFT LCD

2
  • New
Out of stock
ESP32

M5Stack Tough ESP32 IoT waterproof Board Kit...

MCBM5STTOU34
€49.17
The M5Stack ** Waterproof ESP32 embedded controller TOUGH** is Industrial grade programmable embedded controller featuring Espressif ESP32 chipset with integrated Wi-Fi, It is equipped with dual-core low power Xtensa® 32-bit LX6 microprocessor with clock frequency up to 240MHz. A combination of 8M PSRAM + 16M FLASH memory , integrated 2.0-inch HD IPS...
View
2
Available
ESP32

32bit RISC-V M5Stamp C3 with Wi-Fi and...

MCBM5STSTAMP
€6.25
Description M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3 RISC-V MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption,...
2
Out of stock
ESP32

M5stack ATOM TailBat - Battery Accessory for ATOM

MCBM5STTAILB
€6.63
TailBat is an external battery accessory designed for M5ATOM. If the TailBat module is inserted into the M5ATOM,it can directly supply power to the , enabling the M5ATOM to be used in mobile applications. The TailBat contains a 190mah battery and features a physical button. It is controlled by the power management chip IP5303. When the power is turned on,...
View
2
Out of stock
ESP32

M5Stack K033 - Kit robot BugC sans M5StickC

MCBM5SBUGC
€14.58
Description BugC is a programmable robot base compatible with the M5StickC. This has four DC motors, motor driver, two RGB LEDs, battery holder and a switch. The Bugc base needs to be used in conjunction with the M5StickC controller. The base comes with an STM32F030F4 micro controller which controls all the motors and LEDs and this is controlled through...
View
2
Out of stock
ESP32

M5STICKC plus IoT development module Kit...

MCBM5STIKITP
€22.50
M5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototying. Developing with M5StickC PLUS takes...
View
2
Available
ESP32

M5Stack BALA2 K014-C(ESP32 mini Electric...

MCBM5FDEVBALA
€62.50
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
2
Available
ESP32

M5Stack ATOM Lite ESP32 Pico Development Kit

MCBM5STATPL
€10.42
M5Stack ATOM Lite ESP32 Development Kit features a 240MHz dual-core ESP32-PICO chip that comes integrated with Wi-Fi and Bluetooth® technologies. The board has a 4MB of integrated SPI flash memory and provides Infra-red LED, buttons, and HY2.0 interface. This ATOM lite board provides more GPIOs for customization that are suitable for embedded smart home...
2
Out of stock
ESP32

M5Stack K036-B - Kit robot Rover C Pro sans...

MCBM5FDEVROV
€52.08
The RoverC is a programmable, omnidirectional mobile robot base compatible with the M5stickC, and can be started by inserting the M5stickC. The main controller of the base is the stm32f030f4 microcontroller. The base is supplied with N20 worm gear motors which are directly controlled by a four channel motor driver. These motors are connected to mechanical...
View
2
Out of stock
ESP32

M5Stack Core2 ESP32 IoT Development Kit SKU: K010

MCBM5STKITC2
€48.33
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board...
View
2
Available
ESP32

M5Stack ATOM Matrix ESP32 Development Kit

MCBM5STATP
€15.00
M5Stack ATOM Lite ESP32 Development Kit features a 240MHz dual-core ESP32-PICO chip that comes integrated with Wi-Fi and Bluetooth® technologies. The board has a 4MB of integrated SPI flash memory and provides Infra-red LED, RGB LED, buttons, and HY2.0 interface. This ATOM lite board provides more GPIOs for customization that are suitable for embedded...
2
Out of stock
ESP32

M5stack ESP32 GRAY Development Kit with 9-Axis...

MCBM5STKITG
€40.00
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
View
2
Available
Display

ITDB02 Arduino MEGA Shield v2.2

ASHITDB02MEG
€7.08
This is ITDB02 Arduino MEGA Shield v2.2. This product includes all the parts . Support LCD TFT 3.2 ''4.3'' 5.0 ''7.0'' 3.2 4.3 5.0 7.0
2
Out of stock
Display

Raspberry Pi 3.5” TouchScreen Display ( HDMI IC...

LCDWSH35P480320HDMI
€24.92
Ecran Tactile 480x320 avec interface HDMI 3,5 pouces, interface HDMI, écran IPS, conçu pour Raspberry Pi 3+ et inférieur ou+ avec cable micro hdmi Caractéristiques Résolution matérielle de 480 x 320, configurable par logiciel jusqu'à 1920 x 1080.  Contrôle tactile résistif Technologie IPS, haute qualité et affichage parfait sous un angle de vue très large...
View
2
Available
TFT LCD

LCD TFT Display Screen 2.4 240x320 (ILI9341)...

LCDGEN24ILI9341
€11.67
This great little display boasting a 240X320 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer. 2.4" Serial TFT LCD 240X320 Display SPI (ILI9341)(Raspi...
2
Available
ESP32

M5STICKC IoT Arduino Basic Kit (ESP32-PICO Mini...

MCBM5STIKIT
€20.83
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process. M5stickC is one of the core...
2
Out of stock
ESP32

M5Stack BALA (ESP32 mini Electric...

MCBM5FDEVBALA
€103.75
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
View
2
Available
ESP32

M5Stack Fire Dev Kit (ESP32 dev module, Wifi,...

MCBM5FDEVKIT
€54.17
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not...
2
Available
LCD

7 inch capacitive touch screen LCD 1024x600...

LCDNPI7X710
€62.50
The 7” Touch screen Monitor fo Nanopi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 1024 x 600 display connects via an adapter board which handles power and signal co nversion. ribbon cable that connects  Touch screen drivers with support for 10 - finger touch and an...
Out of stock
ESP32

M5Stack Basic Kit (ESP32 dev module, Wifi,...

MCBM5STKIT
€36.67
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
View
2
Available
Display

3.5inch Resistive Touch Display (B) for...

LCDWSH35P320480
€24.92
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
2
  • Reduced price / -€2.50
Available
Display

2.2" Serial TFT LCD Display (SPI, 176X220,...

LCDGEN22ILI9341
€10.00 €12.50
This great little display boasting a 176X220 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
2
Out of stock
Display

MD070SD 7" 16-Bit Parallel Bus TFT Module with...

LCDMD070SD
€33.33
MD070SD adopts 8080 timing sequence with 16-bit parallel bus interface, resolution of 800 × 480, display panel with 16M color and integrated with 8-page video memory (the remaining memory could be used as extended memory). The interior of module utilizes CPLD + SDRAM mode to drive RGB interface display, which does not only realize conversion between the...
View
2
Available
Display

ITDB02 Arduino Shield (Arduino Compatible)

ASHITDB02
€9.00
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino pins, for that reason, this Arduino shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
TFT LCD
Product added to wishlist
Product added to compare.