Sensors

 2
  • New
Available
Sensors

M5stack Module RFID2 WS1850S 13.56MHz 13.56MHz...

SENM5SRFID2
€6.67
Description RFID2 is a radio frequency identification unit. Built-in WS1850S chip, working frequency is 13.56MHz. Supports reading card, writing card, recognition, recording, and encoding RF card Multiple functions such as authorization and authorization. Use magnetic field induction technology to realize non-contact two-way information interaction, read...
Available
Weight and Height

Weight Sensor 0-100kg (Load Cell)

SENSES100KG
€21.25
Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.
 2
Available
Grove

M5stack Finger Print Sensor Unit (FPC1020A)

SENM5S1020A
€23.33
Description FINGER Unit is a fingerprint sensor based on the FPC1020A chipset. This all-in-one fingerprint sensor makes fingerprint adding, verification and managing super simple. Operated by the UART protocol, Compact size and ultra-low power consumption makes it very attractive to use around M5Stack series product. it performs fast fingerprint matching...
 2
Available
Dev. Tools

M5StickV K210 AI Camera (Without Wifi)

ESPM5SCAMK210
€60.83
M5Stack recently launched the new AIoT(AI+IoT) Camera powered by Kendryte K210 -an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and advanced neural network processor..M5StickV AI Camera possesses machine vision capabilities, equips OmniVision OV7740 image sensor, adopts OmniPixel®3-HS technology, provides optimum low light...
 2
Available
Motorized

DRV8825 GRBL 13.2 Module stepper tri axée, M5Stack

BRBLM5S8825
€15.42
Description GRBL 13.2 is a three-axis stepper motor driver module in the M5Stack stacking module series. It uses an ATmega328P-AU controller with three sets of DRV8825PWPR stepper motor driver chip control ways, which can drive three bipolar steppers at the same time. Using the I2C communication interface (default address:0x70) and integrated DIP switch...
 2
Available
Dev. Tools

Unit Kit for M5StickC Hat ENVIII SHT30 QMP6988

M5STIKITENVIII
€11.25
ENV III HAT is a multifunctional environmental sensor adapted to the M5StickC series. It integrates SHT30 and QMP6988 internally to detect temperature, humidity, and atmospheric pressure data. SHT30 (0x44) is a high-precision, low-power digital temperature sensor. Humidity sensor. QMP6988 (0x56) is an absolute air pressure sensor specially designed for...
 2
Available
Electronics

M5stack Grove U095 6 axes MPU6886 6DOF...

SENM5STU095
€7.42
6-Axis IMU Unit is a 6-axis attitude sensor with 3-axis gravity accelerometer and 3-axis gyroscope, which can calculate tilt angle and acceleration in real time. The chip adopts mpu6886, has 16 bit ADC, built-in programmable digital filter and on-chip temperature sensor, adopts I2C interface (addr:0x68) to communicate with host computer, and supports...
 2
Out of stock
Grove

M5stack Grove - Barometer Sensor(BMP280)

BARM5SGRBMP280
€5.00
Barometric Pressure Unit is a barometer unit, which integrates the Bosch BMP280 pressure sensor to measure atmospheric pressure and estimate the altitude. The relative accuracy can reach ± 0.12hpa, equivalent to ± 1m height difference. At the same time, the temperature drift coefficient is very low, which can reach 1.5 PA / K, that is, the temperature...
 2
Available
Grove

M5stack Grove U028 - MLX90614 NCIR Remote...

GROVM5STU028
€20.00
NCIR featured with built-in infrared MLX90614 sensor, It can be used to measure the surface temperature of a human body or other object. Unlike most temperature sensors, this sensor measures infrared light bouncing off of remote objects so it can sense temperature without having to touch them physically. Simply point the sensor towards what you want to...
 2
Available
Motorized

M5STACK ATOM PWM Kit (FDD8447L)

PWMM5ST8447
€15.67
The ATOM PWM is a single-channel PWM regulate DC Driver with built-in MOSFET load capacity up to 12V@100W, suitable for high-power DC motor PWM speed control and industrial heating wire control applications. Using ATOM LITE as the core controller (built-in ESP32), it has a wide PWM dynamic adjustment range (e.g., frequency of 5 kHz, duty cycle adjustment...
 2
Available
Motorized

M5STACK U102 - SG92R Holding unit, robotic gripper

ECGM5STU102
€5.75
Catch is a gripper that uses a SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasing operations. The structure adopts a design compatible with Lego 8mm round holes. You can combine it with other Lego components to build creative control structures, such as robotic...
 2
Available
Motorized

M5STACK SERVO2 Module 16 Channels - 13.2 (PCA9685)

SERVM5S9685
€18.92
SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. The maximum total power output of dual channel is 35W (5V / 3.5A * 2), and the maximum output power...
 2
Out of stock
Electronic basics

M5stack Grove ENV III Unit with Temperature...

GROVM5STENVIII
€7.08
ENV III is an environmental sensor that integrates SHT30 and QMP6988 internally to detect temperature, humidity, and atmospheric pressure data. SHT30 is a high-precision and low-power digital temperature and humidity sensor, and supports I2C interface (SHT30:0x44 , QMP6988:0x70).QMP6988 is an absolute air pressure sensor specially designed for mobile...
 2
Out of stock
Electronics

M5STACK ECG Module13.2 (AD8232) with cables and...

ECGM5SAD823
€45.75
ECG is a heart rate monitor (electrocardiogram) unit,it can detect the heart rate and output a cardiogram signal. Electrocardiogram (ECG) is a technology that uses an electrocardiograph to record the changes in the electrical activity of the heart during each cardiac cycle. At the signal acquisition end, this ECG module integrates the AD8232 single-lead...
 2
Available
Raspberry Pi

PIS-0702 - Raspberry pi GPIO emulator expansion...

ADARPIGPIO
€13.25
Bring the world of physical computing to your PC or Mac by adding GPIO to your PC Or Mac with the Ryanteck RTk.GPIO! The RTk.GPIO is a Plug & Play USB Device which adds 28 x Raspberry Pi style GPIO pins to your computer! Compatible with Windows, Mac and Linux this board allows you to add GPIO to your computer.
 2
Available
Sensors

M5STACK U107 - UHF RFID reader JRD-4035

SENM5SRFIDUHF
€70.00
Description UHF-RFID is an ultra-high frequency (UHF) embedded wireless radio frequency reader module. The JRD-4035 module solution with built-in ceramic antenna completely eliminates the technical uncertainty that ordinary UHF modules need to be equipped with additional antennas for users. Optimize the RF design to realize the low power consumption and...
 2
Available
Dev. Tools

M5STACK-POE-CAMERA-W-O-WI-FI-OV2640

SENM5SCAM2640RJ
€40.00
Description PoECAM is an open source Fully programmable camera integrating PoE (Power Over Ethernet) . This item is ESP32 based webcam with W5500 embedded Ethernet controller plus 200w pixel image sensor OV2640. PoECAM equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image...
 2
Available
Electronics

Capacitive soil moisture sensor (arduino Raspi)...

SENGENMOISTV2
€4.92
Soil moisture module is most sensitive to the ambient, generally used to detect the moisture content of the soil.When the module can not reach the threshold value, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low;The small board digital output D0 can be connected directly to the MCU, MCU to detect...
 2
Available
Electronics

M031-Z - Module de communication COM.Zigbee...

BARM5SCOMXZIGB
€24.83
COM.Zigbee is a Zigbee self-organizing network communication module launched by M5Stack. The module adopts the CC2630F128 solution, internally integrates the Zigbee protocol stack, and opens the serial communication interface. Integrated external antenna, single node stable communication distance up to 1km, 200-level router depth, through the MESH...
 2
Available
Electronics

M031-G - Module NEO-M8N COM.GPS avec antenne,...

BARM5SCOMXGPS
€33.25
COM.GPS is a satellite positioning module in the M5Stack stacking module series. It is developed based on the NEO-M8N module and is equipped with an active antenna. The NEO-M8 can spend a small amount of time, conduct high-sensitivity acquisition, and keep the system low power consumption. NEO-M8N integrates the 72-channel u-blox M8 GNSS engine,...
 2
Out of stock
Dev. Tools

M5Stack U017 - Module caméra PSRAM OV2640 avec...

SENM5SCAM2640
€15.00
Description M5Camera is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and 2-Megapixel camera (OV2640).M5Camera offers plenty of storage, with an extra 4 Mbyte PSRAM. It also supports image transmission via Wi-Fi and debugging through USB Type-C port. The hardware comes preloaded software, programmed by ESP-IDF....
 2
Available
Electronic basics

M5stack Grove Mini Infrared Emitter & Receiver...

GROVM5IR
€4.58
Description IR is a pair of infrared photoelectric sensors from the M5Go Kit family. Contains 1x infrared emitter and 1x receiver. IR remote control is widely used in consumer electronics, it can be used to operate devices such as a television set, DVD player, or other home appliance, from a short distance. Since this unit comes with emitter and receiver,...
 2
Available
Electronic basics

M5stack Grove RF UNIT 433MHz Receiver (SYN513R)

GROVM5433R
€4.58
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
 2
Available
Electronic basics

M5stack Grove RF UNIT 433MHz Transmitter (SYN115)

GROVM5433T
€4.58
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
 2
Available
Electronic basics

M5stack Grove CANBus Unit(CA-IS3050G) can-bus

GROVM5CAN
€12.42
Description CAN Unit is an isolated controller area network (CAN) transceiver unit, which can be used to build a complex can communication network. The built-in DC-DC isolated power chip can isolate noise and interference and prevent damage to sensitive circuits. The model of the isolated CAN transceiver is ca-is3050g, which can provide differential...
 2
Out of stock
Electronic basics

M5stack Grove Ultrasonic Distance Unit (RCWL-9600)

GROVM5SULTR
€4.17
Description Ultrasonic is an ultrasonic distance measuring sensor unit, with the capability of simultaneous reception and transmission. The ultrasonic probe has a sound frequency of 40KHz, a direction angle of ±20 ° and an accuracy of 1mm. The internal part is calculated by an RCWL-9600 ultrasonic distance measuring chip, and the measurement results can...
 2
Available
Grove

Grove Mini GPS/BDS Unit (AT6558) M5stack

BARM5SGRGPS
€12.08
GPS is an M5Stack Unit that integrates a AT6558 navigation chip and a MAX2659 amplification chip which is used for amplifying the antenna signal. AT6558 is an high performance chip that supports many types of satellite navigation systems, able to receive satellite signals on 56 channels GNSS signal from 6 satellite navigation system, joint location,...
 2
Available
Grove

Grove - Barometer Sensor(BMP280) M5stack

BARM5SGRBMP180
€5.00
Barometric Pressure Unit is a barometer unit, which integrates the Bosch BMP280 pressure sensor to measure atmospheric pressure and estimate the altitude. The relative accuracy can reach ± 0.12hpa, equivalent to ± 1m height difference. At the same time, the temperature drift coefficient is very low, which can reach 1.5 PA / K, that is, the temperature...
 2
Available
Dev. Tools

4-Channel 16-Bit ADC for Raspberry Pi (ADS1115)...

ADASEEHAT1115
€15.50
The analog-to-digital converter(ADC) is a common accessory for Raspberry Pi. This is a 4-channel ADC based on Texas Instrument's ADS1115, which is a precision, low-power, 16-bit ADC chip. We make this ADC into a compact Raspberry Pi Zero form factor and integrated an analog Grove connector so that you can also use analog Grove modules with it.
 2
Out of stock
Electronics

Mini Camera For Pi Zero

SENRPIZCAM
€16.58
Doté du même capteur de caméra OV5647 de 5 mégapixels que le Module caméra v1 Raspberry Pi original, ce minuscule Module Caméra sera le compagnon idéal de votre Raspberry Pi 0 ! Livré avec un câble de caméra intégrée Raspberry Pi Zero et est donc compatible avec le Raspberry Pi 0 seulement.
  • Reduced price / -€1.10
Available
Sensors

Weight Sensor (Load Cell) 0-1kg

SENJAN1KG
€7.23 €8.33
Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.
Product added to wishlist
Product added to compare.