Motorized

2
  • New
Available
Robots

Under 60mm Simple Metal Detector Kit

ROB2WDELECKIT
€6.25
Tension de travail: DC3-5V, distance de détection: moins de 60 mm Le détecteur de métaux est un capteur de métal haute performance con？u pour la sécurité. Il peut également s'appliquer aux divertissements de jeux, à la détection de voitures, à la détection de la position des équipements, au détecteur de proximité des métaux, aux statistiques de trafic,...
2
Available
Motorized

M5StickC 8-Channel Servo Driver HAT

SERVM5S8
€10.75
8Servos HAT v1.1 is an 8-channel servo driver module that works with the M5StickC/C Plus series. Adopt STM32F030F4 as main controller to drive servos with PWM (Pulse Width Modulation) signal. I2C communication. Embedded power management circuit to control servo ON/OFF with programming. With the rechargeable 16340 lithium battery (with the capacity of...
2
Available
Soldering

737G Spot Welder for 18650 Lithium Battery, 1.5...

SOLPOI12V
€112.50
737G Spot Welder 737G The 737G Battery Spot Welder is designed with pulse mode selection and 0-99 level current adjustment. Welding nickel strips (nickel plating: 0.15mm, pure nickel: 0.12mm) can make the point more reliable. The combination of fixed welding head and foot switch will meet users' different requirements. This spot welding equipment is...
2
Available
Soldering

Portable DIY Mini Spot Welder Machine 18650...

SOLPOI12V
€24.92
Features: * 1. This spot welding pen comes standard with a pair of concentric ball point needles, which is effective. * 2. 18650 battery spot welding pen, suitable for long-term work, improve work efficiency, made of thick brass bar. * 3. The appearance is beautiful and clean, and the heat dissipation is fast. It is suitable for assembling batteries. *...
Available
Motorized

DC 20000RPM K30 DC Motor

MOTSEDK3020C
€3.00
This motor with small size and less weight, low power. It can output enough force to make some model like mini aircraft and robot platform.
2
Available
Motorized

DRV8825 GRBL 13.2 Module stepper tri axée, M5Stack

BRBLM5S8825
€15.42
Description GRBL 13.2 is a three-axis stepper motor driver module in the M5Stack stacking module series. It uses an ATmega328P-AU controller with three sets of DRV8825PWPR stepper motor driver chip control ways, which can drive three bipolar steppers at the same time. Using the I2C communication interface (default address:0x70) and integrated DIP switch...
2
Available
Robots

DFRobot Robotic Spider Chassis Kit ROB0103

ROBDFRSPID
€8.25
Description      Design and build a robotic creature full of energy      Eight multi-jointed legs accurately replicate the walking motion of a real spider      Two mounting choices to let you change stride length and spider gait
2
Available
Robots

TWIN-Motor - double axle gearbox 3-speed crank...

MOTCAR2GEAR
€10.00
Description • Gear ratios: 58:1 207:1 • Engine: FA-130 • Motor RPM: 12300 (9710 Maximum Efficiency) • Motor voltage: 1.5-3V (1.5V Recommended) • Motor current (max): 2.1A • Motor current (no load): 150mA • Motor stall torque: 36 g-cm Double axle motor. The Tamiya Double Gearbox is a ready-to-assemble kit comprising two motors each acting on an output...
2
Available
Robots

Tamiya Tracked Vehicle Kit (Arduino raspi...

MOTTANCKIT
€17.50
Description      The Tamiya Crawler Kit traverses over objects in its path and rough terrain      Quick to assemble and no soldering required      Not recommended for children under 3 years old Use this kit alone or combine it with other accessories to make a more complex machine with more possibilities. The gearbox can be built with two possible speed...
2
Available
Motorized

M5STACK ATOM PWM Kit (FDD8447L)

PWMM5ST8447
€15.67
The ATOM PWM is a single-channel PWM regulate DC Driver with built-in MOSFET load capacity up to 12V@100W, suitable for high-power DC motor PWM speed control and industrial heating wire control applications. Using ATOM LITE as the core controller (built-in ESP32), it has a wide PWM dynamic adjustment range (e.g., frequency of 5 kHz, duty cycle adjustment...
2
Available
Motorized

M5STACK U102 - SG92R Holding unit, robotic gripper

ECGM5STU102
€5.75
Catch is a gripper that uses a SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasing operations. The structure adopts a design compatible with Lego 8mm round holes. You can combine it with other Lego components to build creative control structures, such as robotic...
2
Available
Motorized

M5STACK SERVO2 Module 16 Channels - 13.2 (PCA9685)

SERVM5S9685
€18.92
SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. The maximum total power output of dual channel is 35W (5V / 3.5A * 2), and the maximum output power...
2
Available
Robots

2WD Smart car kit, smart line tracking, engine,...

ROB2WDELECKIT
€12.50
This a well designed, Arduino compatible mobile robot development platform,you can build it and program it easily with tons of published free codes. Compare with the last mobile platform, this one has a light body with mounting holes, you can add Variety of sensors to make it more interesting.
2
Available
3D Printing

V1.0 module for motor filter 3D printer controller

ASHRAMPS
€3.75
TL-smooth is an add-on module for 3D printer stepper motor drivers     The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against induction voltages in the unpowered state of the driver     You will get smoother movement especially on the delta style 3Dprinter under DVR8825 stepper drivers and A4988 /...
2
Out of stock
ESP32

M5Stack K033 - Kit robot BugC sans M5StickC

MCBM5SBUGC
€14.58
Description BugC is a programmable robot base compatible with the M5StickC. This has four DC motors, motor driver, two RGB LEDs, battery holder and a switch. The Bugc base needs to be used in conjunction with the M5StickC controller. The base comes with an STM32F030F4 micro controller which controls all the motors and LEDs and this is controlled through...
View
2
Available
ESP32

M5Stack K036-B - Kit robot Rover C Pro sans...

MCBM5FDEVROV
€63.00
The RoverC is a programmable, omnidirectional mobile robot base compatible with the M5stickC, and can be started by inserting the M5stickC. The main controller of the base is the stm32f030f4 microcontroller. The base is supplied with N20 worm gear motors which are directly controlled by a four channel motor driver. These motors are connected to mechanical...
2
Available
Robots

130 Brush Motor Mini Wind Educational Toy DIY...

ROB4WDACRE
€12.50
A simple mechanical structure, very convenient platform to build upon with one DC motors that can be controlled . Two levels of acrylic plates to allow for bigger electronics. Very simple assembly.
2
Out of stock
Robots

micro: Maqueen Lite-micro:bit Educational...

ROBMAQ2WD
€28.75
micro: Maqueen Lite-micro:bit Educational Programming Robot Platform I am Maqueen Hello, my name is Maqueen, is a graphical programming robot for STEM education, which inherits playability and simple operation of micro:bit. The Mini-body, interesting features and plug-and-play allow children to quickly learn graphic programming in entertaining, nurturing...
View
Available
Electronics

Battery Holder - 1 x AA

ENEITEBOX1AA
€1.58
A prototype AA battery case, it has on/off switch on the case, and it can be fully closed by cap and further screw it to close, so it’s very well protected.
2
Available
Robots

4-DOF Metal Robot Arm Kit for Raspberry Pi,...

ROBWS4DOF
€50.00
Equip your Raspberry Pi with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic. This starter robotic arm kit includes: servo driver HAT, metal mechanical arm structure, and 4x metal gear servos. When used with the Raspberry Pi, it is easy to control the arm by smart phone through Bluetooth or WiFi connection.
2
  • Reduced price / -€3.10
Out of stock
Electronics

SM24240, Two-Phase Stepper Motor (NEMA 17)

STEWS24240
€11.90 €15.00
This is a simple and bi-polar stepper motor, it is what you need for your Reprap, Makerbot and other 3D Printers or CNC or Laser or Plasma cutter 
View
2
Available
Motors and Servos

EC3 Plug connectors M/F

CONEC3MF
€2.08
The best battery connectors on the market just got better with the development of the EC3, also called the EC3 The new EC3 features snap on insulating end caps which provide extra grip and heart-shrink free installation. They also have a design change which is far more user-friendly for connection and disconnection with an improved integrated grip area. 
Available
Arduino

CNC Shield for Arduino NANO V3 (Arduino...

ASHCNCNANOKIT
€6.67
The Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4x A4988 or DRV8825 with this shield and an Arduino you can build all kinds of robotics or CNC projects including CNC routers, laser cutters and even pick&place machines. This is the KIT...
2
Available
Motorized

FPV Bracket Kit with 2 servo SG90 (Robotique)

MECFPV9GBRA2
€16.67
This is the FPV Bracket Kit with 2 9g Servo, with the help of this product, it would be easy for you to create 3-axis projects such as environment monitoring, tracking. It would be you good partner in servo related projects.
Available
Motorized

TR_P10A Plush 10A Brushless Speed ​​Controller

MOTASCTP10A
€12.08
Plush 10A Brushless Speed ​​Controller La série Peluche ESC sont un contrôleur de haute qualité bien connue des amateurs expérimentés. Ils ont un large éventail de fonctions de programmation couplés avec la réponse de l'accélérateur en douceur qui en fait le go-to ESC pour ceux qui savent. Nos contrôleurs de vitesse TURNIGY viennent avec une garantie de...
2
Available
Motorized

2WD Pololu 5" Robot Chassis RRC04A Solid...

ROB2WRRC04A
€8.25
The 5" robot chassis RRC04A is an 1/8" acrylic chassis that provides a base for our micro metal gearmotors, extended brackets, and 42×19mm wheels. The robot chassis has many mounting holes that let you mount a variety of robot components to it. With a diameter of only five inches, this acrylic chassis is great for building robots capable of navigating...
2
Available
Motorized

2WD Mobile platform DFR0310 Upper Deck for...

ROB2W0310
€8.25
Description Time to upgrade! This is a upper deck PCB for the 2WD MiniQ Robot Chassis. It is compatible with 9g micro servo and URM ultrasonic mounting bracket. With this upper deck you can upgrade the MiniQ with more sensors, and carry more duties - more possibilities, much more fun. The leaf pads on the surface make it an ideal on-the-go prototyping...
2
Available
Prototyping

Servo head bracket two degrees bracket set...

ROBJANGRIP
€8.25
This tiny gripper uses a rack-and-pinion design with a servo-driven pinion and opposing racks to keep the gripper's paddles synchronized and parallel to each other throughout its 55mm range of motion.
2
Out of stock
Robots

POLOLU MICRO GRIPPER KIT WITH POSITION FEEDBACK...

ROBPOLGRIPKIT
€18.33
This small gripper uses a rack and pinion design with a servo-driven pinion and opposing racks to keep the gripper paddles synchronized and parallel to each other throughout its 32 mm range of motion. It includes a special micro servo with an additional wire that gives access to its feedback potentiometer, so you can track the actual position of the...
View
2
Available
3D Printing

RAMPS 1.5 5x Stepper motor driver mount shield...

ASHRAMPS15
€12.50
RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an...
Available
Electronics

Accelerometer, 3 Axis, ADXL345BCCZ, I2C, SPI...

Analog Devices
SENITEADXL345SMD
€7.50
The ADXL345 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±16 g (!!!) with a 13bit resolution. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion,...
2
Available
Electronics

DC 6V 2000RPM Mini Gear Motor 3mm JA6-N20 for...

MOTGENGEARED6V100RPM
€7.08
Gear (reduction) motor of pretty good quality, running at 2000rpm. All you need to do is connect the postive and negative pole-pin, simple enough for beginners.
2
Available
Electronic drivers

1.5A Dual Channel DC Motor Driver Module PWM...

MOTJANDUDRV298
€4.17
1.5A Dual Channel DC Motor Driver Module PWM Speed H-Bridge Stepper L298N DC Motor Driver Module 1.5A Dual Channel PWM Speed H-Bridge Stepper L298N Description: Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor. The module supply voltage 2V-10V Signal input voltage 1.8-7V Single Operating current 1.5A, peak current up...
Motorized
Product added to wishlist
Product added to compare.