Accessories

 2
Available
Display

Rainbow Cube Kit- RGB 4X4X4

KITSESRAINCUBE
€62.50
This is a  kit of 4x4x4 RGB LEDs cube, containing 64 8mm RGB LEDs, custom PCBs and all supporting components  (6 free alternate LEDs are included in the kit). All parts are well packed in a nice package. Compare with other similar projects, this one comes with super slim frame PCB design which not only looks very beautiful but also makes the assembly much...
 2
Available
Dev. Tools

nRF24L01+ 2.4Ghz RF module (improved range)

iTeadStudio
WIRITENRF24L01
€4.00
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
 2
  • Reduced price / -€5.00
Out of stock
Dev. Tools

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
€7.00 €12.00
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
 2
Available
Dev. Tools

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
€3.92
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
 2
Available
Dev. Tools

Screw Shield

Seeed Studio
ASHSESSCREW
€6.00
Screw shield is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks.
 2
Available
Display

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
€3.50
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
 2
Available
Dev. Tools

Foca Pro : FT232RL Tiny Breakout (FTDI USB to...

USBITD00001
€9.17
Foca is a FT232RL breakout. The FT232RL is a USB to serial UART interface with optional clock generator output. It’s the essential tools for establishing communication between PC and mostly MCU. Especially, it’s the optimum tool for basic boards without without USB interface, like arduino pro, colorduino, etc. The good point is that it also supports the...
 2
Available
Dev. Tools

PL2303 USB to UART (TTL) breakout

iTeadStudio
USBITEPL23035V
€4.08
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example. It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.
 2
Available
Dev. Tools

GPS Logger Shield Arduino , Ublox Neo-6M R2

ASHELEGPSSHIELD
€16.58
Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into SD card by Arduino
 2
Available
Prototyping

Arduino Stackable Header Kit (Arduino Compatible)

CONITEARDSTKHDR
€1.25
This pack includes: 2 pcs 6-pin lengthen female headers 2 pcs 8-pin lengthen female headers They all have 2.54mm spacing between pins and they are the perfect height for clearing the USB-B connector and great for stacking multiple shields.Their long legs also make it enough to connect a shield to an Arduino Main Board.
 2
  • Reduced price / -€11.00
Available
Electronics

Sensor Kit for Arduino and Raspberry pi

SESTAOBRSK
€30.67 €41.67
This is a Starter kit of electronic brick; it includes basic components and sensors. You can build many interesting projects even if you don't know anything about soldering that makes it the best choice for beginners.
Available
Electronics

Battery Charging StepUp Power Supply Module...

iTeadStudio
POWSEDLITCHM
€3.25
The module is used for charging of single lithium battery or multiple lithium batteries in parallel, and the charging port can take power from the USB port. output USB micro usb input / usb output / and charging lipo
 2
Out of stock
Dev. Tools

iTead 3G shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITE3G
€62.50
The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.
Available
Dev. Tools

CAN-BUS MCP2515 Module TJA1050 Receiver SPI...

CANBUSSEDSHIELD
€4.08
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus.
 2
Out of stock
Dev. Tools

New Starter Kit Arduino

MCBARDSTARTERKITB2
€33.33
This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components  Starting the basics of electronics, to more complex projects, the kit will help you control the physical world 
 2
Available
Dev. Tools

FT232RL Tiny Breakout (USB FTDI TTL)

USBITD00001B
€5.67
FT232RL breakout. The FT232RL is a USB to serial UART interface with optional clock generator output. It’s the essential tools for establishing communication between PC and mostly MCU. Especially, it’s the optimum tool for basic boards without without USB interface, like arduino pro, colorduino, etc.
 2
Available
Power and Energy

Mini Solar/Lipo Charger Board

ENESESLIPORIDER05
€10.00
In our application, especially in some outdoor applications, we often need to use the lithium battery, lithium battery charging problem is a need to solve the problem, we designed this mini lithium battery charging board. Board size is very small , It can u solar
 2
Available
Dev. Tools

HackSpark Basic Plus NEW pack kit for Arduino...

KITFLYBASIC3N
€20.83
Breadboard This pack contains a good base to begin with Arduino or other micro-controllers and begin with some advanced projects using leds or a servo motor.
 2
Available
Wireless Connectivity

GPS Lora SD Shield for Raspberry Pi 3 B+, R2...

ASHELEGPSSHIELDRPI
€12.50
GPS: Use GPS module Ublox Neo-7M, or NEO-6M or ATGM332 compatible GPS module. All have the same performace. Fast and high speed locating. By test with our 3M meter GPS antenna, fixed in 30 seconds by small ceramic antenna fixed in 3- 10 mintues, in brand new module. On board backup battery, for next time quick fix location. On board 1PPS fix GPS LED to...
Available
Dev. Tools

AVR USB Programmer

Seeed Studio
PRGSEDAVRUSB
€24.00
This is a cheap usb programmer for the AVR chips (like the Arduino ones).
 2
Available
Home

BTBee Pro

iTeadStudio
WIRITEBTBEEPRO
€19.38
BTBee Pro is a serial port Bluetooth module which can be compatible with the shields which with XBee sockets. It's designed for Bluetooth wireless transfer. It supports Slave and Master mode, can be plugged into XBee socket and using the UART for transparent transmission. This module supports Bluetooth Wireless Program as well.
Product added to wishlist
Product added to compare.