M5STACK/M5STICK

2
  • New
Available
Sensors

Scale Weight Unit - HX711 M5stack

ECRM5SSHX711M
€5.42
Description Scales Kit is a high precision low-cost weighing kit. This digital Scales kit is consist of four pieces of half-bridge resistive strain gauges, with a total weighing range of 200kgs. It is equipped with a 24-bit A/D converter chip HX711, specially designed for the high precision electronic scale. The built-in low-noise programmable amplifier...
2
  • New
Available
Sensors

Scale Kit with Weight Unit 200Kg- HX711

ECRM5SSHX711
€14.58
Description Scales Kit is a high precision low-cost weighing kit. This digital Scales kit is consist of four pieces of half-bridge resistive strain gauges, with a total weighing range of 200kgs. It is equipped with a 24-bit A/D converter chip HX711, specially designed for the high precision electronic scale. The built-in low-noise programmable amplifier...
2
  • New
Available
Electronics

STM32 Chip 8 Channel Rotary Encoder, M5Stack

ENCM5S8C
€16.67
UNIT 8Encoder is a set of 8 rotary encoders as one of the input unit, the internal use of STM32 single-chip microcomputer as the acquisition and communication processor, and the host computer using I2C communication interface, each rotary encoder corresponds to 1 RGB LED light, encoder in addition to left and right rotation, but also radially pressed, in...
2
Available
Sensors

CoreInk Proto Base M5stack

SENM5SINKPOT
€5.75
CoreInk Proto Base is a DIY expansion kit suitable for CoreInk master control. When stacking the expansion board, the IO bus on the CoreInk main control will be led out to the PROTO board through the lower PIN pin. You can design and build the circuit according to your own needs. The package also contains a variety of expansion parts (HY2.0-4P female...
2
Available
Storage & Batteries

ExtPort for Core2, expansion port module, M5Stack

MCBM5PEXP
€7.08
ExtPort For Core2 est un module d'extension pour M5Stack Core2 converti en interface Grove. Il fournit des interfaces Grove PortB/C/D/E 4, et PortD/E peut être configuré avec différents GPIO via des commutateurs DIP internes.
2
Available
Dev. Tools

UnitV k210 Edge Computing AI Camera(OV7740)...

M5SCAM78K210
€35.00
Description UnitV(OV7740) is the new AI Camera powered by Kendryte K210, an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and state-of-art neural network processor. UNIT-V AI Camera features its integration with machine vision capabilities, featuring the unprocessed acceptability to AI Visioning with high energy efficiency and low...
2
Available
Dev. Tools

M5Stack M5GO IoT Starter Kit V2.6

M5STKITDEVGO
€68.33
The M5GO IoT Starter Kit is a cost effective IoT starter development kit. The kit contains Core Controller M5GO + 6 expansion units with different functions (sensors/actuators/splitters) + . The core controller M5GO adopts Espressif ESP32 chip, equipped with 2 low-power Xtensa® 32-bit LX6 microprocessors, with a main frequency of 240MHz. With 16M FLASH...
2
Available
Motorized

M5StickC 8-Channel Servo Driver HAT

SERVM5S8
€10.75
8Servos HAT v1.1 is an 8-channel servo driver module that works with the M5StickC/C Plus series. Adopt STM32F030F4 as main controller to drive servos with PWM (Pulse Width Modulation) signal. I2C communication. Embedded power management circuit to control servo ON/OFF with programming. With the rechargeable 16340 lithium battery (with the capacity of...
2
Available
Dev. Tools

Smartwatch development kit without base module,...

MCBM5STKITDEV
€12.50
Description Watch is an M5Core watch set. In addition to being a powerful development hardware, the M5Core has a sophisticated look that gives it the possibility to wear smart. The kit is designed for the M5Core series,Compared with the old 3D printing base, the new model uses a mold, which has a qualitative improvement in appearance and quality. in...
2
Available
M5STACK/M5STICK

UWB Indoor Ultra-Wideband Positioning Device...

SENM5SUWB
€52.00
UWB is a Unit which integrates the UWB(Ultra Wide Band) communication protocol which uses nanosecond pulses to locate objects and define position and orientation. The design uses the Ai-ThinkerBU01 Transceiver module which is based on Decawave's DW1000 design. The internal STM32 chip with its integrated ranging algorithm,is capable of 10cm positioning...
2
Available
Dev. Tools

LoRa Module 868MHz M5stack

MCBM5PLOR868
€16.25
LoRa868 is a LoRa communication module in the M5Stack stack module series (working frequency is 868MHz). A certain expansion space is reserved on the module, which defeats you for more functional design. For wireless communication or projects with more customized elements, the LoRa868 module will be a suitable choice.
2
Available
Dev. Tools

USB to TTL for ESP32, Downloader, M5Stack

USBTTLESP32
€6.67
ESP32 Downloader Kit is a USB-TTL adapter board for ESP32 /ESP8266, This item contains CP2104/CH9102 chip. It supports one-touch download without chip and pin down resetting manual . Plug-in board and row of pins parts from the set can be so convenient for ESP32/ESP8266 series development board or M5Stack series products for program burning or serial...
Available
Electronics

Grove - 200Cm Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED020MPIN4
€4.17
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 20cm cables for different applications.
2
Available
Sensors

M5stack Module RFID2 WS1850S 13.56MHz 13.56MHz...

SENM5SRFID2
€6.67
Description RFID2 is a radio frequency identification unit. Built-in WS1850S chip, working frequency is 13.56MHz. Supports reading card, writing card, recognition, recording, and encoding RF card Multiple functions such as authorization and authorization. Use magnetic field induction technology to realize non-contact two-way information interaction, read...
2
Out of stock
ESP32

32bit RISC-V M5Stamp C3U KIT with Wi-Fi and...

MCBM5STSTAC3U
€7.50
Description M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3 RISC-V MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption,...
View
2
Available
M5STACK/M5STICK

M5Stack Mini Keyboard Unit MEGA328P CardKB Grove

KEYM5SU035
€12.50
Description CardKB is a unit with an implemented full-featured QWERTY keyboard. Consider that you want make some cool stuff that require keyboard typing and interaction, but M5 core by itself only has 3 buttons, what can you do? introducing CardKB, the flexible and powerful keyboard unit. CardKB also can achieve button combination (Sym+Key, Shift+Key,...
2
Available
Grove

M5stack Finger Print Sensor Unit (FPC1020A)

SENM5S1020A
€23.33
Description FINGER Unit is a fingerprint sensor based on the FPC1020A chipset. This all-in-one fingerprint sensor makes fingerprint adding, verification and managing super simple. Operated by the UART protocol, Compact size and ultra-low power consumption makes it very attractive to use around M5Stack series product. it performs fast fingerprint matching...
2
Available
Dev. Tools

M5StickV K210 AI Camera (Without Wifi) (OV7740)

ESPM5SCAMK210
€60.83
M5Stack recently launched the new AIoT(AI+IoT) Camera powered by Kendryte K210 -an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and advanced neural network processor..M5StickV AI Camera possesses machine vision capabilities, equips OmniVision OV7740 image sensor, adopts OmniPixel®3-HS technology, provides optimum low light...
2
Out of stock
ESP32

M5Stack Faces Kit Pocket Computer with...

ESPM5SFACE
€102.92
Description FACES Kit is a series of functional panels integration containing three most commonly used panels integration containing three most commonly used panels 'GameBoy','Calculator' and 'QWERTY'. With MEGA328 processor built inside, it works under slave mode through I2C communication protocol. With these 3 different panels, it will be very easy to...
View
2
Available
ESP32

M5Stack Core2 ESP32 IoT Development Kit for AWS...

ESPM5SCORE210
€52.50
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board...
2
Available
Motorized

DRV8825 GRBL 13.2 Module stepper tri axée, M5Stack

BRBLM5S8825
€15.42
Description GRBL 13.2 is a three-axis stepper motor driver module in the M5Stack stacking module series. It uses an ATmega328P-AU controller with three sets of DRV8825PWPR stepper motor driver chip control ways, which can drive three bipolar steppers at the same time. Using the I2C communication interface (default address:0x70) and integrated DIP switch...
2
Available
ESP32

C050 ESP32-PICO-D4, Microcontroller M5Stamp...

M5STSTAMPPICO
€5.50
STAMP-PICO features an ultra-compact design with two low-power Xtensa® 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, sensors, and other IoT devices.
2
Available
ESP32

M5Stack Tough ESP32 IoT waterproof Board Kit...

MCBM5STTOU34
€49.17
The M5Stack ** Waterproof ESP32 embedded controller TOUGH** is Industrial grade programmable embedded controller featuring Espressif ESP32 chipset with integrated Wi-Fi, It is equipped with dual-core low power Xtensa® 32-bit LX6 microprocessor with clock frequency up to 240MHz. A combination of 8M PSRAM + 16M FLASH memory , integrated 2.0-inch HD IPS...
2
Available
Electronic basics

U131 - 2 Way Relay Unit, 8A, 250V, M5Stack (grove)

GROVM5S2REL
€8.25
Description 4-Relay unit is an integrated 2-way relay module which can be controlled by I2C protocol. The maximum control voltage of each relay is AC-250V/DC-28V, the rated current is 10A and the instantaneous current can hold up to 8A. Each relay can be controlled independently, each on it's own. Each relay has status (LED) indictor as well to show the...
2
Available
Dev. Tools

M5Stack Proto-13.2

M5PCBKIT132
€7.08
PROTO 13.2 is a universal DIY proto module in the m5stack stack module series, with a height of 13.2mm. You can easily build your own custom circuits by using this module. You can design and build the prototype circuit according to your own needs, and interact with the M5 Core on the top layer through M-BUS. There are HY2.0 4P, DC power socket, VH3.96 and...
2
Available
Dev. Tools

Unit Kit for M5StickC Hat ENVIII SHT30 QMP6988

M5STIKITENVIII
€11.25
ENV III HAT is a multifunctional environmental sensor adapted to the M5StickC series. It integrates SHT30 and QMP6988 internally to detect temperature, humidity, and atmospheric pressure data. SHT30 (0x44) is a high-precision, low-power digital temperature sensor. Humidity sensor. QMP6988 (0x56) is an absolute air pressure sensor specially designed for...
2
Available
Popular products

M5StickC 18650C U080

MCBM5PCBAT18
€8.25
18650C HAT is a rechargeable battery base designed for M5SticKC with built-in 18650 large capacity rechargeable lithium battery.It can provide long-term endurance for the equipment. The base is designed with the plug-in structure of the HAT series, which can be used to maintain reliable connection with the M5StickC. The bottom is equipped with a USB...
2
Available
ESP32

32bit RISC-V M5Stamp C3U with Wi-Fi and...

MCBM5STSTAMP
€6.92
Description M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3 RISC-V MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption,...
2
Available
Electronic basics

U097 - 4 Way Relay Unit, 10A, 250V, M5Stack...

GROVM5S4REL
€14.08
Description 4-Relay unit is an integrated 4-way relay module which can be controlled by I2C protocol. The maximum control voltage of each relay is AC-250V/DC-28V, the rated current is 10A and the instantaneous current can hold up to 16A. Each relay can be controlled independently, each on it's own. Each relay has status (LED) indictor as well to show the...
2
Out of stock
Dev. Tools

M5Stack LoRaWAN UNIT 868MHz (ASR6501) with...

MCBM5PCLOR868G
€14.08
Unit LoRaWAN868 is a LoRaWAN communication module suitable for 868MHz frequency launched by M5Stack. The module adopts the ASR6501 scheme, which supports long-distance communication and has both ultra-low power consumption and high sensitivity. The module integrates the LoRaWAN protocol stack and adopts a serial communication interface (using the AT...
View
2
Available
Electronics

M5stack Grove U095 6 axes MPU6886 6DOF...

SENM5STU095
€7.42
6-Axis IMU Unit is a 6-axis attitude sensor with 3-axis gravity accelerometer and 3-axis gyroscope, which can calculate tilt angle and acceleration in real time. The chip adopts mpu6886, has 16 bit ADC, built-in programmable digital filter and on-chip temperature sensor, adopts I2C interface (addr:0x68) to communicate with host computer, and supports...
2
Out of stock
Grove

M5stack Grove - Barometer Sensor（BMP280)

BARM5SGRBMP280
€5.00
Barometric Pressure Unit is a barometer unit, which integrates the Bosch BMP280 pressure sensor to measure atmospheric pressure and estimate the altitude. The relative accuracy can reach ± 0.12hpa, equivalent to ± 1m height difference. At the same time, the temperature drift coefficient is very low, which can reach 1.5 PA / K, that is, the temperature...
View
2
Available
Grove

M5stack Grove U028 - MLX90614 NCIR Remote...

GROVM5STU028
€20.00
NCIR featured with built-in infrared MLX90614 sensor, It can be used to measure the surface temperature of a human body or other object. Unlike most temperature sensors, this sensor measures infrared light bouncing off of remote objects so it can sense temperature without having to touch them physically. Simply point the sensor towards what you want to...
2
Out of stock
Dev. Tools

M5stack ATOMIC DIY Proto Kit for ATOM series

MCBM5STPROT
€3.75
ATOMIC is a DIY Proto Kit designed specially for the Atom series, which makes it convenient for users to design small circuits or external hardware by themselves. It can be stacked with Atom directly via the 9 pins on the base. Two blank proto boards are provided in the kit, each of which provides more than 60 hole positions to meet the spatial layout...
View
2
Available
Motorized

M5STACK ATOM PWM Kit (FDD8447L)

PWMM5ST8447
€15.67
The ATOM PWM is a single-channel PWM regulate DC Driver with built-in MOSFET load capacity up to 12V@100W, suitable for high-power DC motor PWM speed control and industrial heating wire control applications. Using ATOM LITE as the core controller (built-in ESP32), it has a wide PWM dynamic adjustment range (e.g., frequency of 5 kHz, duty cycle adjustment...
2
Available
Motorized

M5STACK U102 - SG92R Holding unit, robotic gripper

ECGM5STU102
€5.75
Catch is a gripper that uses a SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasing operations. The structure adopts a design compatible with Lego 8mm round holes. You can combine it with other Lego components to build creative control structures, such as robotic...
2
Available
Dev. Tools

M5stack ATOM Mate Adapter DIY Expansion Kit

MCBM5STMAT
€3.25
ATOM MATE is a DIY expansion kit specially designed for the M5ATOM family. The kit contains 3 kinds of accessories. AtomPin is a pin adapter board that can expand the bottom pins of the M5Atom from all sides, making it easier to build circuits on the breadboard. With a special bracket, you can easily attach M5Atom without affecting the use of the pins....
2
Available
Motorized

M5STACK SERVO2 Module 16 Channels - 13.2 (PCA9685)

SERVM5S9685
€18.92
SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. The maximum total power output of dual channel is 35W (5V / 3.5A * 2), and the maximum output power...
2
Available
Electronic basics

M5stack Grove ENV III Unit with Temperature...

GROVM5STENVIII
€7.08
ENV III is an environmental sensor that integrates SHT30 and QMP6988 internally to detect temperature, humidity, and atmospheric pressure data. SHT30 is a high-precision and low-power digital temperature and humidity sensor, and supports I2C interface (SHT30:0x44 , QMP6988:0x70).QMP6988 is an absolute air pressure sensor specially designed for mobile...
2
Out of stock
ESP32

M5stack ATOM TailBat - Battery Accessory for ATOM

MCBM5STTAILB
€6.63
TailBat is an external battery accessory designed for M5ATOM. If the TailBat module is inserted into the M5ATOM,it can directly supply power to the , enabling the M5ATOM to be used in mobile applications. The TailBat contains a 190mah battery and features a physical button. It is controlled by the power management chip IP5303. When the power is turned on,...
View
2
Out of stock
ESP32

M5Stack K033 - Kit robot BugC sans M5StickC

MCBM5SBUGC
€14.58
Description BugC is a programmable robot base compatible with the M5StickC. This has four DC motors, motor driver, two RGB LEDs, battery holder and a switch. The Bugc base needs to be used in conjunction with the M5StickC controller. The base comes with an STM32F030F4 micro controller which controls all the motors and LEDs and this is controlled through...
View
2
Available
M5STACK/M5STICK

M5STACK Grove U005 - ANGLE Rotary Potentiometer...

POTM5S10K
€3.83
M5STACK Grove U005 - ANGLE Rotary Potentiometer Unit, Linear, 10 kOhm Description ANGLE is a rotary switch Unit which simply includes a 10K Ohm potentiometer inside. This unit can be used for Continuous signal rotatory control for applications such as volume, brightness, or motor speed. A potentiometer is a manually adjustable variable resistor with three...
Available
Electronics

Grove - 300MM Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED03MPIN4
€0.83
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 30cm cables for different applications.
2
Available
Sensors

M5STACK U107 - UHF RFID reader JRD-4035

SENM5SRFIDUHF
€70.00
Description UHF-RFID is an ultra-high frequency (UHF) embedded wireless radio frequency reader module. The JRD-4035 module solution with built-in ceramic antenna completely eliminates the technical uncertainty that ordinary UHF modules need to be equipped with additional antennas for users. Optimize the RF design to realize the low power consumption and...
2
Available
Dev. Tools

M5STACK-POE-CAMERA-W-O-WI-FI-OV2640

SENM5SCAM2640RJ
€40.00
Description PoECAM is an open source Fully programmable camera integrating PoE (Power Over Ethernet) . This item is ESP32 based webcam with W5500 embedded Ethernet controller plus 200w pixel image sensor OV2640. PoECAM equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image...
2
Available
Electronics

Grove - PRT-15109 - Câble adaptateur Grove...

GRVSEDPIN4
€1.67
Quick overview With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove boards from Seeed Studio....
2
Available
Electronic basics

M5stack Grove - Dual-Button Unit

GROVM5SBUT
€3.08
DescriptionDual Button as the name states, has two buttons with different color. If the Button unit is not enough for your application needs, how about double it up to a pair? They share the exact same mechanism, button status can be detected by the input pin status by simply capturing the high/low electrical level.
2
Available
ESP32

M5STICKC plus IoT development module Kit...

MCBM5STIKITP
€24.92
M5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototying. Developing with M5StickC PLUS takes...
2
Available
Electronics

M031-Z - Module de communication COM.Zigbee...

BARM5SCOMXZIGB
€24.83
COM.Zigbee is a Zigbee self-organizing network communication module launched by M5Stack. The module adopts the CC2630F128 solution, internally integrates the Zigbee protocol stack, and opens the serial communication interface. Integrated external antenna, single node stable communication distance up to 1km, 200-level router depth, through the MESH...
2
Available
Electronics

M031-G - Module NEO-M8N COM.GPS avec antenne,...

BARM5SCOMXGPS
€33.25
COM.GPS is a satellite positioning module in the M5Stack stacking module series. It is developed based on the NEO-M8N module and is equipped with an active antenna. The NEO-M8 can spend a small amount of time, conduct high-sensitivity acquisition, and keep the system low power consumption. NEO-M8N integrates the 72-channel u-blox M8 GNSS engine,...
2
Out of stock
Electronics

M5STACK Isolated RS485 Unit grove

CONMSISORS485
€8.25
Description Isolated RS485 Unit is an isolated half duplex transceiver based on the RS485 bus protocol. It can convert TTL level to RS485 level. Since various electrical noises and transient changes of voltage and current may affect communication, Using CA-IS3082W as an interface chip can effectively shield the above noise and provide sufficient...
View
2
Out of stock
Dev. Tools

M5Stack U017 - Module caméra PSRAM OV2640 avec...

SENM5SCAM2640
€15.00
Description M5Camera is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and 2-Megapixel camera (OV2640).M5Camera offers plenty of storage, with an extra 4 Mbyte PSRAM. It also supports image transmission via Wi-Fi and debugging through USB Type-C port. The hardware comes preloaded software, programmed by ESP-IDF....
View
2
Out of stock
ESP32

M5Stack BALA2 K014-C(ESP32 mini Electric...

MCBM5FDEVBALA
€62.50
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
View
2
Available
Dev. Tools

M5Stack COM.LoRaWAN Module 868MHz (ASR6501)

MCBM5PCLOR868
€27.08
Description COM.LoRaWAN is a LoRaWAN communication module in the M5Stack stackable module series, supporting node-to-node or LoRaWAN communication. The LoRaWAN module based on ASR6501 encapsulates the PSoC4000 and SX1262 chips, supports the 868MHz frequency band, is based on an ultra-low power design, and consumes very low current (3.5μA) in deep sleep...
2
Available
ESP32

M5STACK JoyC (W/O M5StickC) Omni-directional...

MCBM5STAJOYC
€15.42
JoyC is a rocker module designed for the M5StickC.It supports two-hand operation. Embedded STM32F030F4 main control chip, using I2C communication protocol and host M5StickC for data transmission. The range of the joystick is 0~200, there are 12 RGB LEDs under the left and right joysticks, and the bottom of the joystick is equipped with a 16340 battery...
2
Available
Electronic basics

M5stack Grove Mini Infrared Emitter & Receiver...

GROVM5IR
€4.58
Description IR is a pair of infrared photoelectric sensors from the M5Go Kit family. Contains 1x infrared emitter and 1x receiver. IR remote control is widely used in consumer electronics, it can be used to operate devices such as a television set, DVD player, or other home appliance, from a short distance. Since this unit comes with emitter and receiver,...
2
Available
Dev. Tools

M5Stack COM.GSM 2G Communication Module（SIM800C)

MCBM5PCS800C
€19.92
Description COM GSM is a stackable 2G communication module, with the SIM800C communication module built-in. The working frequency of COM GSM is GSM/GPRS 850/900/1800/1900MHz,and it can transmit SMS and data information with low power consumption. The module has a DC power input and can provide 5V-12V power supply through an external power supply. In order...
2
Available
Electronic basics

M5stack Grove RF UNIT 433MHz Receiver (SYN513R)

GROVM5433R
€4.58
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
2
Out of stock
Electronic basics

M5stack Grove RF UNIT 433MHz Transmitter (SYN115)

GROVM5433T
€4.58
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
View
2
Out of stock
Electronic basics

M5stack Grove CANBus Unit(CA-IS3050G) can-bus

GROVM5CAN
€12.42
Description CAN Unit is an isolated controller area network (CAN) transceiver unit, which can be used to build a complex can communication network. The built-in DC-DC isolated power chip can isolate noise and interference and prevent damage to sensitive circuits. The model of the isolated CAN transceiver is ca-is3050g, which can provide differential...
View
2
Available
Electronic basics

M5stack Grove Ultrasonic Distance Unit (RCWL-9600)

GROVM5SULTR
€4.17
Description Ultrasonic is an ultrasonic distance measuring sensor unit, with the capability of simultaneous reception and transmission. The ultrasonic probe has a sound frequency of 40KHz, a direction angle of ±20 ° and an accuracy of 1mm. The internal part is calculated by an RCWL-9600 ultrasonic distance measuring chip, and the measurement results can...
2
Available
Electronic basics

M5stack Grove Earth Moisture Sensor Unit Analog...

GROVM5SEARTH
€4.17
Description EARTH unit is a Soil Moisture Sensor for measuring the moisture in soil and similar materials. The soil moisture sensor usage is pretty straight forward, the two large exposed pads function as probes for the sensor, together acting as a variable resistor. The higher moisture that is in the soil means the better the conductivity between the two...
2
Available
Electronic basics

M5stack Grove - PDM MEMS Microphone Unit (SPM1423)

GROVM5SPDM
€4.58
Description PDM mini Unit is a digital MEMS silicon-based microphone based on PDM (Pulse Density Modulation) signal. The microphone has high signal-to-noise ratio, high sensitivity, low power consumption, anti-radio frequency interference, smooth frequency response and other characteristics. It automatically switches the microphone state according to the...
2
Available
Grove

Grove Mini GPS/BDS Unit (AT6558) M5stack

BARM5SGRGPS
€12.08
GPS is an M5Stack Unit that integrates a AT6558 navigation chip and a MAX2659 amplification chip which is used for amplifying the antenna signal. AT6558 is an high performance chip that supports many types of satellite navigation systems, able to receive satellite signals on 56 channels GNSS signal from 6 satellite navigation system, joint location,...
2
Available
Grove

M5Stack Watering Unit with Mositure Sensor and...

M5SGROVPUMP
€10.00
Watering is a capacitive soil moisture detection and adjustment unit. The product integrates water pump and measuring plates for soil moisture detection and pump water control. It can be used for intelligent plant breeding scenarios and can easily achieve humidity detection and Irrigation control. The measurement electrode plate uses the capacitive...
2
Out of stock
ESP32

M5Stack ATOM Lite ESP32 Pico Development Kit

MCBM5STATPL
€10.42
M5Stack ATOM Lite ESP32 Development Kit features a 240MHz dual-core ESP32-PICO chip that comes integrated with Wi-Fi and Bluetooth® technologies. The board has a 4MB of integrated SPI flash memory and provides Infra-red LED, buttons, and HY2.0 interface. This ATOM lite board provides more GPIOs for customization that are suitable for embedded smart home...
View
2
Out of stock
Grove

Grove - Barometer Sensor（BMP280) M5stack

BARM5SGRBMP180
€5.00
Barometric Pressure Unit is a barometer unit, which integrates the Bosch BMP280 pressure sensor to measure atmospheric pressure and estimate the altitude. The relative accuracy can reach ± 0.12hpa, equivalent to ± 1m height difference. At the same time, the temperature drift coefficient is very low, which can reach 1.5 PA / K, that is, the temperature...
View
2
Available
ESP32

M5Stack K036-B - Kit robot Rover C Pro sans...

MCBM5FDEVROV
€63.00
The RoverC is a programmable, omnidirectional mobile robot base compatible with the M5stickC, and can be started by inserting the M5stickC. The main controller of the base is the stm32f030f4 microcontroller. The base is supplied with N20 worm gear motors which are directly controlled by a four channel motor driver. These motors are connected to mechanical...
2
Available
Dev. Tools

M5Stack GSM Module SIM800L with MIC & Headphone...

MCBM5PCS800
€12.50
SIM800L is a cellular phone module, integrated SIM800L, a GSM/GPRS module, only cpmpatible with 2G network. if you want to integrate a cellular module into your design with vioce, text and SMS, this hand-solderable module is pretty nice!
2
Available
ESP32

M5Stack Core2 ESP32 IoT Development Kit SKU: K010

MCBM5STKITC2
€54.17
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board...
Out of stock
Electronics

Grove - Câbles de capteur M5Stack, A034-D, pour...

Seeed Studio
GRVSED1MPIN5
€3.33
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 100cm cables for different applications.
View
2
Available
ESP32

M5Stack ATOM Matrix ESP32 Development Kit

MCBM5STATP
€15.00
M5Stack ATOM Lite ESP32 Development Kit features a 240MHz dual-core ESP32-PICO chip that comes integrated with Wi-Fi and Bluetooth® technologies. The board has a 4MB of integrated SPI flash memory and provides Infra-red LED, RGB LED, buttons, and HY2.0 interface. This ATOM lite board provides more GPIOs for customization that are suitable for embedded...
2
Out of stock
ESP32

M5stack ESP32 GRAY Development Kit with 9-Axis...

MCBM5STKITG
€40.00
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
View
2
Available
Sensors

M5stack TCS34725 Color Sensor Color Recognition...

SENM5SCOLOR
€8.25
The Color sensor module base on TCS34725M5STACK Description La couleur est une unité de reconnaissance des couleurs avec puce TCS3472 intégrée.Identifier la couleur principe:Dans le TCS3472, un tableau 3*4 de photodiodes filtrées et un convertisseur analogique-numérique 16 bits sont intégrés. Sur les 12 photodiodes, 3 ont des filtres rouges, 3 ont des...
2
Available
Sensors

M5stack Pulsesensor Heart Rate Pulse Sensor Module

SENM5SPULSH
€12.50
M5Stack plus récent Mini unité de fréquence cardiaque MAX30100 Module capteur pour Arduino/faible puissance fréquence cardiaque oxygène impulsion rupture I2C Interface
2
Available
Dev. Tools

Unit Kit for M5StickC Hat ENVII SHT30 BMP280...

MCBM5STIKITENVII
€11.25
ENV II HAT is an environment sensor which can sense temperature, humidity and atmospheric pressure. It is built with SHT30, BMP280 and BMM150 sensors, it is programmed over I2C. SHT30 is a digital temperature and humidity sensor with high precision and low power consumption. BMP280 is an absolute barometric pressure sensor which is especially designed for...
M5STACK/M5STICK
Product added to wishlist
Product added to compare.