Electronic basics

2
  • New
Available
Electronic basics

Combined Breadboard (Breadboard 3220 contacts)

PCBFLY3220PT
€24.58
This is a standard solderless breadboard - three binding posts,  power buses,  With a total of 3220 in points, all pins are spaced by a standard 0.1".
2
  • New
Available
Electronic basics

U131 - 2 Way Relay Unit, 8A, 250V, M5Stack (grove)

GROVM5S2REL
€8.25
Description 4-Relay unit is an integrated 2-way relay module which can be controlled by I2C protocol. The maximum control voltage of each relay is AC-250V/DC-28V, the rated current is 10A and the instantaneous current can hold up to 8A. Each relay can be controlled independently, each on it's own. Each relay has status (LED) indictor as well to show the...
2
  • New
Available
Electronic basics

U097 - 4 Way Relay Unit, 10A, 250V, M5Stack...

GROVM5S4REL
€14.08
Description 4-Relay unit is an integrated 4-way relay module which can be controlled by I2C protocol. The maximum control voltage of each relay is AC-250V/DC-28V, the rated current is 10A and the instantaneous current can hold up to 16A. Each relay can be controlled independently, each on it's own. Each relay has status (LED) indictor as well to show the...
2
Available
Electronics

MAX232N interface émetteur récepteur full...

Texas Instruments
MAX232NDIP16
€2.08
TheMAX232deviceis a dualdriver/receiverthatincludesa capacitivevoltagegeneratorto supplyTIA/EIA-232-Fvoltagelevelsfroma single5-Vsupply.EachreceiverconvertsTIA/EIA-232-Finputsto 5-V TTL/CMOSlevels.Thesereceivershaveatypicalthresholdof 1.3 V, a typicalhysteresisof 0.5V, and can accept±30-Vinputs.EachdriverconvertsTTL/CMOSinputlevelsinto TIA/EIA-232-Flevels
2
Available
Electronics

ST232BDR interface émetteur récepteur full...

ST Microelectronics
ST232BDRCMS
€1.58
The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12 V is not available. The ST232 uses a single 5 V power supply and only four external capacitors (0.1 µF). Typical applications are in: portable computers, low power modems, interfaces translation, battery...
2
Available
Grove

M5stack Grove U028 - MLX90614 NCIR Remote...

GROVM5STU028
€20.00
NCIR featured with built-in infrared MLX90614 sensor, It can be used to measure the surface temperature of a human body or other object. Unlike most temperature sensors, this sensor measures infrared light bouncing off of remote objects so it can sense temperature without having to touch them physically. Simply point the sensor towards what you want to...
2
Available
Electronic basics

M5stack Grove ENV III Unit with Temperature...

GROVM5STENVIII
€7.08
ENV III is an environmental sensor that integrates SHT30 and QMP6988 internally to detect temperature, humidity, and atmospheric pressure data. SHT30 is a high-precision and low-power digital temperature and humidity sensor, and supports I2C interface (SHT30:0x44 , QMP6988:0x70).QMP6988 is an absolute air pressure sensor specially designed for mobile...
2
Out of stock
Electronics

M5STACK Grove U005 - ANGLE Rotary Potentiometer...

POTM5S10K
€3.83
M5STACK Grove U005 - ANGLE Rotary Potentiometer Unit, Linear, 10 kOhm Description ANGLE is a rotary switch Unit which simply includes a 10K Ohm potentiometer inside. This unit can be used for Continuous signal rotatory control for applications such as volume, brightness, or motor speed. A potentiometer is a manually adjustable variable resistor with three...
View
2
Available
Electronic basics

M5stack Grove - Dual-Button Unit

GROVM5SBUT
€3.08
DescriptionDual Button as the name states, has two buttons with different color. If the Button unit is not enough for your application needs, how about double it up to a pair? They share the exact same mechanism, button status can be detected by the input pin status by simply capturing the high/low electrical level.
2
Out of stock
Electronic basics

M5stack Grove Mini Infrared Emitter & Receiver...

GROVM5IR
€4.58
Description IR is a pair of infrared photoelectric sensors from the M5Go Kit family. Contains 1x infrared emitter and 1x receiver. IR remote control is widely used in consumer electronics, it can be used to operate devices such as a television set, DVD player, or other home appliance, from a short distance. Since this unit comes with emitter and receiver,...
View
2
Available
Electronic basics

M5stack Grove RF UNIT 433MHz Receiver (SYN513R)

GROVM5433R
€4.58
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
2
Available
Electronic basics

M5stack Grove RF UNIT 433MHz Transmitter (SYN115)

GROVM5433T
€4.58
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
2
Out of stock
Electronic basics

M5stack Grove CANBus Unit(CA-IS3050G) can-bus

GROVM5CAN
€12.42
Description CAN Unit is an isolated controller area network (CAN) transceiver unit, which can be used to build a complex can communication network. The built-in DC-DC isolated power chip can isolate noise and interference and prevent damage to sensitive circuits. The model of the isolated CAN transceiver is ca-is3050g, which can provide differential...
View
2
Out of stock
Electronic basics

M5stack Grove Ultrasonic Distance Unit (RCWL-9600)

GROVM5SULTR
€4.17
Description Ultrasonic is an ultrasonic distance measuring sensor unit, with the capability of simultaneous reception and transmission. The ultrasonic probe has a sound frequency of 40KHz, a direction angle of ±20 ° and an accuracy of 1mm. The internal part is calculated by an RCWL-9600 ultrasonic distance measuring chip, and the measurement results can...
View
2
Available
Electronic basics

M5stack Grove Earth Moisture Sensor Unit Analog...

GROVM5SEARTH
€4.17
Description EARTH unit is a Soil Moisture Sensor for measuring the moisture in soil and similar materials. The soil moisture sensor usage is pretty straight forward, the two large exposed pads function as probes for the sensor, together acting as a variable resistor. The higher moisture that is in the soil means the better the conductivity between the two...
2
Available
Electronic basics

M5stack Grove - PDM MEMS Microphone Unit (SPM1423)

GROVM5SPDM
€4.58
Description PDM mini Unit is a digital MEMS silicon-based microphone based on PDM (Pulse Density Modulation) signal. The microphone has high signal-to-noise ratio, high sensitivity, low power consumption, anti-radio frequency interference, smooth frequency response and other characteristics. It automatically switches the microphone state according to the...
2
Out of stock
Dev. Tools

4-Channel 16-Bit ADC for Raspberry Pi (ADS1115)...

ADASEEHAT1115
€15.50
The analog-to-digital converter(ADC) is a common accessory for Raspberry Pi. This is a 4-channel ADC based on Texas Instrument's ADS1115, which is a precision, low-power, 16-bit ADC chip. We make this ADC into a compact Raspberry Pi Zero form factor and integrated an analog Grove connector so that you can also use analog Grove modules with it.
View
2
Available
Electronics

CD40175BE Digital BCD in decimal, CMOS DIP16...

Texas Instruments
ELCD40175BE
€0.83
CD40175BE Digital BCD in decimal, CMOS DIP16 Decoder Flip Flop Product detail Texas Instruments 4000 Series Toggles and Latching Circuits Texas Instruments Series 4000 Series CMOS Logic Family of Toggles and Latching Circuits CMOS 4000 logic family, Texas Instruments CMOS family devices Extended operating voltage range: 3 to 18 V
Electronic basics
Product added to wishlist
Product added to compare.