Shields

 2
Available
Arduino

Seeed Studio WiFi shield for Arduino (Arduino...

iTeadStudio
ASHSESWLS06201P
€45.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
 2
Available
Dev. Tools

IE Shield (Ethernet ENC28J60 and SD Card) for...

ASHITEIESHIELD
€25.00
IE shield is a Ethernet shield which use the ENC28J60 chip for Arduino. It integrates one Micro-SD card slot and provides main interface breakout. You can use it with Arduino to build your Ethernet development platform.
 2
  • Reduced price / -€2.44
Available
Arduino

Bees Shield

Seeed Studio
SESINT119B2P
€6.67 €9.11
Bees shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. Aside from dual Bee style 20p 2.0 pitch socket, it also has large proto area, customizable software, serial, port for easier prototyping.
 2
Out of stock
Arduino

iTead WiFi shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITEWIFI
€50.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
 2
Out of stock
Dev. Tools

BT (Bluetooth) BLE Shield for Arduino

iTeadStudio
ASHITEBTBLE
€24.50
BLE shield is to adapt Bluetooth Low Energy to serial port, which is specifically designed for Arduino motherboard and compatible boards, plug and play.
 2
Out of stock
Dev. Tools

iTead 3G shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITE3G
€62.50
The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.
 2
  • Reduced price / -€9.00
Out of stock
Ethernet

W5100 Ethernet Shield for Arduino (Arduino...

ECRASW51001E
€8.50 €17.50
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The...
 2
  • Reduced price / -€2.90
Available
Electronics

Energy Shield

Seeed Studio
ASHSESENESH
€18.00 €20.90
Energy Shield is a LiPo battery based power shield that keeps your project alive. It keeps its battery charged whenever an available power source exists. It accepts a wide range of power sources, from common solar cells via JST connector and USB via USB port on microcontroller, to 9V and 12V DC adapters via DC Jack on your Arduino. Meanwhile it can not...
 2
Available
Dev. Tools

ESP8266 Serial WiFi Shield for Arduino

SHLJANESP8266
€15.83
The shield is designed based on esp8266 by Espressif Systems, pin-compatible with Arduino UNO/Mega2560 DevBorad. WiFi module is industrial-grade chips ESP8266, which is ESP-12E with metal shield, strong anti-interference ability; Shield is pin-compatible with Arduino Uno, Mega2560 and other control board. A voltage converter chip is used to deal with...
 2
Out of stock
Dev. Tools

MotoMama - L298N H-Bridge Motor Driver Shield

MOTDRIITEMOTMAM
€12.50
MotoMama is a motor drivers shield for Arduino, based on L298N H-bridge driver chip. You can use this shield to drive two DC motors or an four-wire two-phase stepper motors with Arduino boards.
 2
  • Reduced price / -€10.00
Available
Dev. Tools

Danger Shield Complete kit

Seeed Studio
ASHDANGER
€15.00 €25.00
The Danger Shield is an add-on for the Arduino. It contains a variety of fun and useful electronic circuits that you can use to do fun and useful things. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No extra things to hook up, no external components. Just a really rad board ready to rock.
 2
Out of stock
Motorized

Motor Shield V2.0

Seeed Studio
ASHSESMOTV2
€16.30
The Motor Shield is a driver module for motors that allows you to use Arduino to control the working speed and direction of the motor. Based on the Dual Full-Bridge Drive Chip L298, it is able to drive two DC motors or a step motor. The Motor Shield can either be powered directly by Arduino or by an external 5V~15V power supply via the DC jack. This...
 2
Out of stock
Dev. Tools

ITDB02 Arduino Mega Shield (Arduino Compatible)

ASHITDB02MEG
€11.00
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino Mega pins, for that reason, this Arduino MEGA shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
 2
Out of stock
Dev. Tools

Base Shield V2

Seeed Studio
ASHSESBASE
€8.00
As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.
  • Reduced price / -€16.20
Available
Sales

8x5 WS2812 RGB Led Matrix Shield with...

LMARGB8X5WS2812
€9.80 €26.00
Put on your sunglasses before putting this shield onto your 'duino - 40 eye-blistering RGB LEDs adorn the panel for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization.
 2
  • Reduced price / -€7.70
Available
Dev. Tools

AVR Programmer Arduino Shield

Electrogragon
PRGELDAVRSHD
€7.05 €14.75
This is AVR programmer, designed as a arduino shield. In this way, you can program most of the AVR ICs with arduino IDE and using arduino board as ISP. The AVR Programmer Shield allows you to program ATtiny and ATmega microcontrollers using your Arduino. Instead of pulling out the breadboard and wiring everything up every time you want to (re)program a...
Available
3D Printing

RAMPS 1.4 5x Stepper motor driver mount shield...

ASHRAMPS14
€12.50
RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an...
 2
  • Reduced price / -€10.00
Available
Display

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
€30.00 €40.00
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
Out of stock
Dev. Tools

Music Player Shield for Arduino (MP3, SD card,...

iTeadStudio
ASHITEMUSPLA
€20.00
The iTead Music Player Shield is based on CECL08D. The CECL08D chip can be used to decode MP3/WAV format audio file. The music player shield has SD card socket and USB interface, supporting USB and SD card play. Just plug and play!
 2
  • Reduced price / -€2.00
Available
Shields

ProtoScrewShield for Arduino (Arduino Compatible)

iTeadStudio
ASH00001
€8.00 €10.00
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
Available
Dev. Tools

CAN-BUS MCP2515 Module TJA1050 Receiver SPI...

CANBUSSEDSHIELD
€4.08
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus.
 2
Available
Dev. Tools

Wireless XBEE SD Shield (SD, Micro-SD Card and...

ECRMCS01109S
€11.67
The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type....
 2
Available
Dev. Tools

GPS Logger Shield Arduino , Ublox Neo-6M R2

ASHELEGPSSHIELD
€16.58
Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into SD card by Arduino
 2
Available
Dev. Tools

Sensor Shield V5.0 For Arduino (servos)...

ECRACS04525S
€8.25
Latest Arduino sensor Shield V5.0 reserves advantages of Arduino Sensor V4.0,such as lamination design, PCB immersion god process, and main board extend all the figures and analog interfaces of Arduino controller. I2C interface, 32 steering engineer controller interface, Bluetooth module communication interface ,SD card module communication interface,...
 2
Available
Dev. Tools

Sensor Shield V4.0 For Arduino (Arduino...

ECRMCS01002S
€7.00
Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm...
 2
Available
Dev. Tools

Screw Shield

Seeed Studio
ASHSESSCREW
€6.00
Screw shield is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks.
Product added to wishlist
Product added to compare.