Network

 2
Out of stock
Dev. Tools

Wifi Bee

Seeed Studio
SESWLS48188P
€64.81
Wifi Bee is a xBee Pro socket compatible module.It integrates Microchip IEEE 802.11 Wi-Fi transceiver module MRF24WB0MA and 8bit AVR MCU ATmega328P. The smart and similar xBee Pro outlook makes it very easy to be integrated in your product. The ATmega328P could be directly programmed under the open source IDE Arduino when you plug it on to the UartSBee....
 2
Available
Dev. Tools

ENC28J60 Ethernet Network Module Breakout Board

NETENC28J60
€10.80
It's a small breakout board for the ENC28J60 Ethernet chip. Contains all the necessary hardware to implement an Ethernet interface including the isolation transformer and LINK/STATUS and power LEDs. SPI interface makes this one of the easiest 10Base-T ICs yet. It's 3.3V with 8KB buffer.
 2
Out of stock
Dev. Tools

SIM900 GSM/GPRS Module

GSMSIM900
€45.00
This GSM module is a breakout board and minimum system of SIM900 Quad-band GSM/GPRS module. It can communicate with controllers via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). This module support software power on, reset, data transfer and audio.
 2
Available
Dev. Tools

IE Shield (Ethernet ENC28J60 and SD Card) for...

ASHITEIESHIELD
€30.00
IE shield is a Ethernet shield which use the ENC28J60 chip for Arduino. It integrates one Micro-SD card slot and provides main interface breakout. You can use it with Arduino to build your Ethernet development platform.
 2
  • Reduced price / -€2.46
Available
Dev. Tools

W5100 Ethernet Network Module Breakout Board

NETW5100
€15.60 €18.06
It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.
 2
Out of stock
Arduino

iTead WiFi shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITEWIFI
€60.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
 2
Available
Dev. Tools

DP83848 Ethernet Network PHY Breakout Board

NETDP83848
€18.00
The DP83848 Ethernet Board is an accessory board includes an onboard Ethernet Physical Layer Transceiver DP83848, RJ45 connector, and control interface.
 2
  • Reduced price / -€9.00
Available
Ethernet

W5100 Ethernet Shield for Arduino (Arduino...

ECRASW51001E
€12.00 €21.00
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The...
 2
Available
Electronics

RN-XV Wifly Bee (RN-171 XV, Wire antenna)

Microchip
WIRRN171XV
€42.00
The RN-171-XV is a 802.11 b/g solution especially designed for designers who want to migrate their existing 802.15.4 architecture to a more standard TCP/IP-based platform without redesigning their existing hardware. Based on a pseudo standard footprint often found in embedded applications, the Roving Networks’ RN-171-XV module provides Wi-Fi connectivity...
 2
Out of stock
Electronics

Grove - DMX512

CONGRODMX512
€5.40
The Grove – DMX512 is a adapter from Grove interface to DMX512 interface(industry standard EIA-485 interface. The module is based on SN75176 chip which can balance transmission lines and meet ANSI Standard EIA-485 interface. Now It is convenience to control stage lighting and DMX512 console for Arduino.
 2
Available
Dev. Tools

Raspberry PI SIM800 GSM/GPRS Add-on

GSMRPISIM900
€42.00
Raspberry PI GSM Add-on is customized for Raspberry Pi interface based on SIM800 quad-band GSM/GPRS module. AT commands can be sent via the serial port on Raspberry Pi, thus functions such as dialing and answering calls, sending and receiving messages and surfing on line can be realized. Moreover, the module supports powering-on and resetting via software.
 2
Available
Home

Grove - Bee Socket

SEDGROBEESOCK
€8.40
Grove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bluetooth Bee, etc. It is Arduino compatible and more effective to conduct peer-to-peer operations and mesh network runned by wireless modules. Regulator CJT1117 guareteens Xbee of stable 3.3 voltages. LEDs can reflect working modes...
  • Reduced price / -€1.20
Out of stock
Wireless Connectivity

ESP-01S WiFi Serial Transceiver Module with...

SEDWIFSERTRNESP
€4.80 €6.00
This is the pin compatible upgrded version of the ESP-01 chip. ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.   ESP8266 has...
 2
Available
Arduino

Seeed Studio WiFi shield for Arduino (Arduino...

iTeadStudio
ASHSESWLS06201P
€54.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
 2
Out of stock
Dev. Tools

LoNet - Mini GSM/GPRS/GPS Breakout

GSMGPSLONET
€72.00
LoNet is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation. It features ultra-low power consumption in sleep mode and integrated with charging circuit for Li-Ion batteries, that make it get a super long standby time...
 2
Available
Home

EMW3165 - Cortex-M4 based WiFi SoC Module

WIREMW3165
€15.00
EMW3165 is a low-power embedded Wi-Fi module integrates a wireless LAN MAC/baseband /radio, and a Cortex-M4 microcontroller STM32F411CE that runs a unique "self-hosted" Wi-Fi networking library and software application stack. EMW3165 has 2M bytes of on-board flash besides 512K bytes of in-chip flash, 128K bytes RAM and rich peripherals for user embedded...
 2
Out of stock
ESP

ESP8266 Wee Serial Wifi Module Starter Kit for...

Microchip
WIRITEWEE
€12.00
Wee is a WIFI module based on ESP8266 SoC. ESP8266 comes out of nowhere and has been taking by storm the IoT world. You can find many hacking projects about it on the internet. So far, the most popular ESP8266 breakout version only has GPIO0 and GPIO2 routed to the header. Compared to it, Wee WIFI module is designed with a standard Bee interface and has...
 2
Available
Dev. Tools

SIM800L GSM/GPRS Module

WIRELESIM800L
€24.00
This module power supply of 5V, computer debugging USB to TTL serial port. 800MA power supply output current , TTL serial port compatible with 3.3V and 5V MCU, the MCU can be connected directly. IPX antenna interface can switch PCB antenna, glue stick antenna and sucker antenna. SIM800L 4 frequency data communications, globally available.
Product added to wishlist
Product added to compare.