Linux

2
Out of stock
Dev. Tools

Radxa Rock Pro - Quad Core Single-board...

LINRADXAROCKPRO
€107.50
Radxa’s new product for single-board computers. The CPU is ARM Cortex-A9 processor running from 324Mhz to 1.6Ghz, and can balancing between performance and power saving. It integrate with full interfaces, all ways to connect like Wifi, Bluetooth, HDMI, USB, Spdif, MIC and TF Card.   As a barebones single-board computer, the key feature for 80 pins 2.54mm...
View
2
Available
Dev. Tools

Seeeduino Cloud (Arduino compatible Yun openWRT...

MCBSEDCLOUD
€55.00
Seeeduino Cloud is a microcontroller board based on Dragino WiFi IoT module HE and ATmega32u4. HE is a high performance, low cost 150M, 2.4G WiFi module which means “core” in Chinese and with an Open Source OpenWrt system inside. Seeeduino Cloud is also an Arduino compatible board, 100% compatible to grove, shield and IDEs(>=1.5.3). Except for the...
2
Available
Prototyping

Cubieboard Proto with VGA connector

PCBCUBPRO
€11.25
This nice protoboard for CubieBoard features a VGA connector and standard 2.54mm pitch connectors to use with all standard components.
2
Available
Dev. Tools

BeagleBone Black (Rev. C)

LINBEAGLEBONEBLK
€55.83
BeagleBone Black is the newest member of the BeagleBoard family and is a lower-cost, high-expansion focused BeagleBone, featuring the Sitara AM3359 ARM Cortex-A8 32-Bit RISC microprocessor from Texas Instruments. It is similar to the BeagleBone but with some previous features removed to make way for the excellent new features.
2
  • Reduced price / -€10.00
Available
Dev. Tools

Cubieboard 2 standard kit (ARM Linux board,...

LINCUB2BRDSTD
€56.67 €66.67
Cubieboard2 is a upgrade of the cubieboard, which is based on Allwinner A20 SoC, small size (10cmx6cm), hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and 96 extended interface.
2
  • Reduced price / -€3.25
Out of stock
Dev. Tools

BeagleBone Green (Seeed Studio version)

Seeed Studio
LINSEDBBGRN
€46.75 €50.00
SeeedStudio BeagleBone Green (BBG) is a joint effort by BeagleBoard.org and Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and developed into this differentiated version. The BBG has included two Grove connectors, making it easier to connect to the large family of Grove sensors. It has also updated the 5V barrel to micro...
View
  • Reduced price / -€3.20
Available
Dev. Tools

T Board for pcDuino

PCBPCDTBOARD
€7.80 €11.00
T Board to Bridge Arduino Shield to pcDuino with Level Shifter
2
Product available with different options
Dev. Tools

NanoPi M1 (Quad Core A7 ARM, 1GB RAM)

LINNANPIM11GB
Quite nice little ARM quad-core board at a very low price. It even features an ethernet port, three USBs, an infrared receiver and an HDMI port.
View
2
Product available with different options
Dev. Tools

NanoPi M1 (Quad Core A7 ARM, 512M RAM)

LINNANPIM1
Quite nice little ARM quad-core board at a very low price. It even features an ethernet port, three USBs, an infrared receiver and an HDMI port.
View
2
Product available with different options
NanoPi

NanoPi M3 (Octa Core Cortex A53 1.4GHz, 1GB...

LINNANPIM3
The NanoPi M3 is another ARM board developed by FriendlyARM for makers, hobbyists and hackers. With this new friend we wish you could get not only tech skills but also unique experiences in various applications and hacking. It is small, elegant but has rich ports and interfaces. Playing with it and working with it the M3 will not only inspire your ideas...
View
2
Out of stock
Official Boards

Arduino Yún (Arduino, Linux and WiFi in one...

Arduino
MCBARDYUN
€60.00
The Arduino Yún is a microcontroller board based on the ATmega32u4 (datasheet) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog...
View
Available
Raspberry Pi

Raspberry Pi B+/2/3 Enclosure - Black

CASRPI2BLK
€6.25
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. The e
2
Product available with different options
RaspberryPi Boards

RaspberryPi type B+ (Raspberry Pi)

LINRASPBERRYBPLUS
The Raspberry Pi Model B+ (512M) is a credit card sized computer that plugs into your TV and a keyboard, its like a littl
View
2
Product available with different options
Prototyping

RaspberryPi type A+ (Raspberry Pi)

LINRASPBERRYAPLUS
The Raspberry Pi is a credit-card sized computer board that's up and running when a keyboard, mouse, display, PSU and MicroSD card with installed OS are added. It’s a miniature ARM-based PC which can run .
View
2
Product available with different options
Raspberry Pi

RaspberryPi 2 Model B (Raspberry Pi quad-core...

LINRPI2B
The Raspberry Pi 2 Model B represents a major performance increase over its single-core based predecessors: up to six times faster in fact. As well as a new quad-core Cortex-A7 processor, the Raspberry Pi 2 Model B now features 1GB of RAM memory. The operating system kernel has been upgraded to take full advantage of the latest ARM Cortex-A7 technology...
View
2
  • Reduced price / -€30.00
Out of stock
Dev. Tools

Raspberry Pi 5” LCD Display HDMI w/touch 800×480

LCDRPI5TCH
€45.00 €75.00
Very nice display compatible with Raspberry Pi 3 B, 2 B, 1 A+ and B+. It fits easily and has a very good response time thanks to its HDMI interface. This is the only one we've seen to boast this interface while still being a plug-in cape/shield. Setup time is quite fast, you just have to set the resolution in the config.txt of your raspberry pi and voilà...
View
2
  • Reduced price / -€85.00
Available
Dev. Tools

Raspberry Pi Compute Module Kit

LINRPICOMPKIT
€94.17 €179.17
Raspberry Pi Compute is a SODIMM format module containing only the basic processor/RAM elements of a Raspberry Pi Model B, plus a Flash memory chip. All processor I/O are accessible via a 200-pin edge connector. The Compute module plugs into an I/O board providing a range of standard connectors for development purposes. A variety of 'boot' methods are...
2
Out of stock
Display

Raspberry Pi 7” TouchScreen Display (Official)(...

LCDRPI7OFF
€75.00
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal co nversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
View
2
  • Reduced price / -€5.33
Out of stock
Dev. Tools

3.95" Raspberry Pi display (320x240, Compatible...

LCDRPI395
€16.67 €22.00
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
View
Linux
Product added to wishlist
Product added to compare.