Grove

 2
Out of stock
Electronics

Grove - EMG Detector

SEDGROEMGSEN
€41.67
EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes. In standby mode, the output voltage is 1.5V. When detect muscle...
 2
Out of stock
Grove

Grove - Infrared Receiver

SEDGROIRREC
€4.00
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter.
Available
Electronics

Electronic Brick - Sound Sensor/Microphone Brick

SENITESNDMIC
€2.50
Electronic brick of microphone can be connected to the analog I / O port, when speaking to the microphone, the analog value will be changed. A recorder can be made by reading and saving the analog value.
Available
Grove

Grove - Infrared Emitter

SEDGROIREMI
€4.00
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side . An infrared LED is like any other LED, with its color centered around 940nm. We can use the emitter not only to transmit data or commands, but also to emulate remotes to control your home appliance...
 2
Available
Grove

Grove - 3-Axis Analog Accelerometer

ACCSED3AXIS
€9.58
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g.   The module was designed as breakout board because ADXL335's signal is analog( more ports requested ),but the board outline is grove module that you can fix it...
 2
Out of stock
Electronics

Grove - GPS

SENSEDGPSGRV
€29.26
This Grove - GPS module is a cost-efficient and field-programmable gadget armed with a SIM28 (U-blox 6 is old version) and serial communication configuration. It features 22 tracking / 66 acquisition channel GPS receiver. The sensitivity of tracking and acquisition both reach up to -160dBm, making it a great choice for personal navigation projects and...
 2
Available
Electronics

Grove - 3-Axis Digital Compass

GROSED3AXIDC
€14.70
3-Axis Compass module, a member of grove family uses I²C based Honeywell HMC5883L digital compass. This ASIC is equipped with high resolution HMC118X magneto-resistive sensors and a 12-bit ADC. It provides compass heading accuracy up to 1° to 2°. Signal conditioning like amplification, automatic degaussing strap drivers and offset...
 2
Available
Electronics

Grove - 3-Axis Digital Accelerometer(±400g)

GROSED3AXDA400
€26.95
The H3LIS331DL is a low power high performance 3-axis linear accelerometer belonging to the “nano” family, with digital I2C serial interface standard output. The device features ultra low power operational modes that allow advanced power saving and smart sleep to wake-up functions. The H3LIS331DL has dynamically user selectable full scales of...
 2
Available
Home

Grove - Mega Shield

Seeed Studio
SEDGROMEGASHI
€10.00
Mega Shield is a extension board for Arduino Mega, DUE and Google ADK.
 2
Available
Home

Grove - Bee Socket

SEDGROBEESOCK
€7.00
Grove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bluetooth Bee, etc. It is Arduino compatible and more effective to conduct peer-to-peer operations and mesh network runned by wireless modules. Regulator CJT1117 guareteens Xbee of stable 3.3 voltages. LEDs can reflect working modes...
 2
Available
Home

Grove - 3-Axis Digital Gyro

SEDGRODIGGYR
€19.92
Grove - 3-axis Gyro module based on ITG 3200. It is the world’s first single-chip, digital-output, 3-axis MEMS motion processing gyro optimized for gaming, 3D mice, and motion-based remote control applications for Internet connected Digital TVs and Set Top Boxes.
 2
Available
Home

Grove - RTC

SEDGRORTC
€9.50
The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol.
 2
Available
Home

Electronic Brick & Grove - Tilt Sensor/Switch...

SENITETILT
€2.50
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Available
Electronics

Grove - Universal 4 Pin Buckled 5cm (Cable) (5...

GRVSED4PIN5
€3.75
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm,20cm,30cm,40cm,and 50cm cables for different applications.
 2
Out of stock
Electronics

Electronic Brick Vibration Sensor Module for...

SENITETILT2
€2.00
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
 2
Available
Electronics

Grove - Speech Recognizer

SNDGRONIZER
€26.00
Use voice to interact with things around you can always be one of the most interesting things of IoT application, we want to make something more different and cooler
 2
Out of stock
Sensors

Grove-Q Touch Sensor

GROSEETOUSEN
€18.69
The Q Touch Sensor is a high sensitivity and high noise immunity touch input device
 2
Available
Sensors

Grove - Gesture

SENSEEGESTUR
€13.75
The sensor on Grove - Gesture is PAJ7620U2 that integrates gesture recognition function with general I2C interface into a single chip
Available
Electronics

Vertical/Straight Rotary Encoder 20imp/rotation...

IHMROTENCBRICK
€3.50
A simple rotary encoder for all your projects. It's like a potentiometer, but without end. It sends pulse to your microcontroller to let you know in which direction it turned. This version also has a button.
Product added to wishlist
Product added to compare.