Main Boards and Compatible

 2
Out of stock
Dev. Tools

Teensy 4.1 USB Dev Board (Pinless)

MCBTEENSY41
€30.83
Product overview      Teensy 4.1 USB Microcontroller Development Board (pinless)      Offers an Arduino-compatible 32-bit microcontroller      Designed to bring all general purpose I/O pins      Features the fastest microcontroller      Can be programmed using the Arduino IDE      Breadboard compatible pads on outer edges
 2
Available
Main Boards and Compatible

Digispark Attiny Micro USB Development Board...

MCBDISPAMICROUSBB
€1.58
The Digispark is an Attiny based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too...
 2
Available
Dev. Tools

ESP32 Development board - WT32-SC01 with...

MCBESP32SC01
€39.17
WT32-SC01 is an ESP32 Development board with a 3.5-inch color touch screen. The touch screen enables a new way of interacting with the ESP32. The board is equipped with a graphical user interface (GUI) firmware, which supports graphical drag-and-drop programming and helps users develop a customized control platform.
 2
Available
Arduino

Arduino UNO Rev 3 ( R3 ) A000066

Arduino
MCB00003B
€20.83
This is the official current Arduino board, top quality, made in Italy and with a Zero Carbon Footprint!Arduino UNO Rev 3 ( R3 )The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power...
 2
Out of stock
Dev. Tools

ABX00027 Arduino Nano 33 IoT, ARM Cortex-M0+...

Arduino
ABX00027
€22.50
This small, robust and powerful card comes with Wi-Fi and Bluetooth connectivity which, combined with its low-power architecture, makes it a practical and economical solution for your connected projects.Arduino Nano33 IOT is fully compatible with Arduino IOT Cloud and supports full TLS secure transport: the crypto chip stores the cryptographic keys in the...
 2
Out of stock
Dev. Tools

Arduino ABX00030 CARTE DEV NANO 33 BLE MCU ARM...

Arduino
ABX00030
€22.50
Arduino Nano 33 BLE (without headers) with Bluetooth Low Energy and embedded inertial sensor is a compact and reliable NANO board. It is built around the NINA B306 module based on Nordic nRF52840 and containing a powerful Cortex M4F. Its architecture, fully compatible with Arduino IDE online and offline, has a 9 axis Inertial Measurement Unit (IMU) and a...
 2
Out of stock
Dev. Tools

Sipeed Longan Nano - RISC-V GD32VF103CBT6...

MCBSEENANOGD32
€7.50
Sipeed Longan Nano is a development board based on GD32VF103CBT6 MCU with RISC-V 32-bit core of GigaDevice. It is convenient for students, engineers and geek enthusiasts to contact the new-generation RISC-V processor. Longan Nano sold by Seeed comes with a 0.96inch 160x80 IPS RGB LCD
 2
Out of stock
Dev. Tools

Arduino MKR ZERO (I2S BUS & SD FOR SOUND, MUSIC...

Arduino
ABX00012
€24.92
The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware!  The board is...
 2
Available
Dev. Tools

SSC-32U USB 32 Servo Controller Atmega 328P

ECRACSPWM32
€33.33
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
 2
Out of stock
Dev. Tools

New Starter Kit with original Arduino UNO

MCBARDSTARTERKITB2
€40.00
This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components  Starting the basics of electronics, to more complex projects, the kit will help you control the physical world 
Out of stock
Dev. Tools

UNO R3 ATmega328 chip (Arduino Compatible UNO R3)

MCB00003C
€12.50
The Uno is a microcontroller board based on the ATmega328 and compatible with the Arduino Uno R3. It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or...
 2
  • Reduced price / -€10.00
Available
Main Boards and Compatible

WIFI Mega 2560 R3 + ESP8266 (32MB RAM) USB-TTL...

MCB00004BW
€22.00 €32.00
Caractéristiques: Intégration complète sur une seule carte: Mega R3 ATmega2560 et WiFi ESP8266 avec mémoire 32 mo (mégaoctets) Tous les modules peuvent fonctionner ensemble ou chacun séparément. Et chacun a ses propres têtes de brochage La solution pratique pour le développement de nouveaux projets nécessitant Uno et WiFi Via USB, vous pouvez mettre à...
 2
Out of stock
Dev. Tools

ESP32-WROVER-KIT

MCBESP32WROVER
€41.67
ESP-WROVER-KIT ESP-WROVER-KIT targets the high performance requirements with 4.5 MB of RAM and a dual core 240 MHz CPU. Create Internet cameras, smart displays or Internet radios with this highly integrated ultra low power module by connecting LCDs, cameras, microphones and codecs to it. Have fun!
Available
Main Boards and Compatible

Digispark Attiny85 Micro USB Development Board...

MCBDISPAMICROUSB
€4.00
The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too...
 2
Available
Dev. Tools

UNO R3 (Arduino Compatible ) CH340

MCB00003B
€9.58
The Uno is a microcontroller board based on the ATmega328 and compatible with the Arduino Uno R3. It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or...
  • Reduced price / -€2.00
Out of stock
Dev. Tools

Wemos D1 (ESP8266, Arduino-compatible layout,...

MCBWEMD1
€10.50 €12.50
The D1 is an Arduino Uno-like wifi board based on ESP-8266EX. 11 digital input/output pins 1 analog input(3.3V max input) a Micro USB connection a power jack, 9-24V power input. Compatible with Arduino
Available
Dev. Tools

Arduino-Compatible Pro Mini [16M/5V, 8M/3V3]

MCBARDPROMIN
€5.42
The minimal design approach to EDArduino, and fully compatible with arduino. This is a 5V EDArduino running the 16MHz bootloader (select ‘Arduino pro mini′ within the Arduino software). EDArduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time EDArduino...
Available
Dev. Tools

ATtiny45-20PU (microcontroller, 8-bit, 4kB...

ELCARDATTINY45
€1.75
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 4KB ISP flash memory, 256-Byte EEPROM, 256B SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter,...
 2
Out of stock
Dev. Tools

ATtiny85-20PU (microcontroller, 8-bit, 8kB...

ELCARDATTINY85
€2.00
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter,...
 2
Out of stock
Wireless Connectivity

BTBee Pro

iTeadStudio
WIRITEBTBEEPRO
€19.38
BTBee Pro is a serial port Bluetooth module which can be compatible with the shields which with XBee sockets. It's designed for Bluetooth wireless transfer. It supports Slave and Master mode, can be plugged into XBee socket and using the UART for transparent transmission. This module supports Bluetooth Wireless Program as well.
 2
  • Reduced price / -€10.00
Out of stock
Dev. Tools

Blend Micro - an Arduino-Compatible Development...

Arduino
BLENDMICRO
€25.00 €35.00
Blend Micro is Red Bear's first integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily.   The micro-controller unit (MCU) is Atmel ATmega32u4 and the BLE chip is Nordic...
 2
  • Reduced price / -€5.00
Available
Arduino

LilyPad Arduino USB (Arduino Compatible)

Arduino
MCBARDLILYUSB
€14.17 €19.17
The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4 (datasheet). It has 9 digital input/output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains everything needed to support the microcontroller;...
 2
  • Reduced price / -€3.50
Available
Dev. Tools

FunDuino UNO (ATMega 328P board compatible with...

MCBFUNUNO
€12.50 €16.00
The FunDuino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer...
 2
Available
Home

Xadow - Main Board

MCBXADMAIN
€22.00
The module is a microcontroller board based on the controller ATmega32U4 with 32k flash. Board can be powered either from the USB connection or a Lithium battery(80mA output current). And the board can charge for the Lithium battery through the USB port. The USB port on the board can be also used for upload program.When you upload program to the Xadow...
 2
Available
Home

ITeaduino Tiny

iTeadStudio
MCBITDTINY
€7.50
Iteaduino Tiny is a mini development board based on Attiny85 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
 2
Product available with different options
Arduino

ITeaduino Nano USB Microcontroller

iTeadStudio
MCB00002C
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
 2
Out of stock
Dev. Tools

Arduino Micro (without headers)

Arduino
MCBARDMICRO
€16.58
The Arduino Micro is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer...
 2
  • Reduced price / -€10.00
Available
Arduino

Makey Makey invention kit

MCBMMKIT
€27.50 €37.50
MaKey MaKey is an invention kit for the 21st century. Turn everyday objects into touchpads and combine them with the internet. It's a simple Invention Kit for Beginners and Experts doing art, engineering, and everything inbetween.
 2
Available
Dev. Tools

Arduino Mini 05 (light / without headers)...

Arduino
MCBARDMINI05LIGHT
€15.50
The Arduino Mini is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet The new Mini (revision 05) has a new package for the ATmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04....
 2
  • Reduced price / -€8.10
Available
Dev. Tools

UNO BT HC-05 (Arduino-compatible with built-in...

iTeadStudio
MCB00001
€23.57 €31.67
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
Product added to wishlist
Product added to compare.