Robots

 2
Available
Motorized

DRV8825 GRBL 13.2 Module stepper tri axée, M5Stack

BRBLM5S8825
€15.42
Description GRBL 13.2 is a three-axis stepper motor driver module in the M5Stack stacking module series. It uses an ATmega328P-AU controller with three sets of DRV8825PWPR stepper motor driver chip control ways, which can drive three bipolar steppers at the same time. Using the I2C communication interface (default address:0x70) and integrated DIP switch...
 2
Available
Robots

DFRobot Robotic Spider Chassis Kit ROB0103

ROBDFRSPID
€8.25
Description      Design and build a robotic creature full of energy      Eight multi-jointed legs accurately replicate the walking motion of a real spider      Two mounting choices to let you change stride length and spider gait
 2
Available
Robots

TWIN-Motor - double axle gearbox 3-speed crank...

MOTCAR2GEAR
€10.00
Description • Gear ratios: 58:1 207:1 • Engine: FA-130 • Motor RPM: 12300 (9710 Maximum Efficiency) • Motor voltage: 1.5-3V (1.5V Recommended) • Motor current (max): 2.1A • Motor current (no load): 150mA • Motor stall torque: 36 g-cm Double axle motor. The Tamiya Double Gearbox is a ready-to-assemble kit comprising two motors each acting on an output...
 2
Available
Robots

Tamiya Tracked Vehicle Kit (Arduino raspi...

MOTTANCKIT
€17.50
Description      The Tamiya Crawler Kit traverses over objects in its path and rough terrain      Quick to assemble and no soldering required      Not recommended for children under 3 years old Use this kit alone or combine it with other accessories to make a more complex machine with more possibilities. The gearbox can be built with two possible speed...
 2
Available
Motorized

M5STACK ATOM PWM Kit (FDD8447L)

PWMM5ST8447
€15.67
The ATOM PWM is a single-channel PWM regulate DC Driver with built-in MOSFET load capacity up to 12V@100W, suitable for high-power DC motor PWM speed control and industrial heating wire control applications. Using ATOM LITE as the core controller (built-in ESP32), it has a wide PWM dynamic adjustment range (e.g., frequency of 5 kHz, duty cycle adjustment...
 2
Available
Motorized

M5STACK U102 - SG92R Holding unit, robotic gripper

ECGM5STU102
€5.75
Catch is a gripper that uses a SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasing operations. The structure adopts a design compatible with Lego 8mm round holes. You can combine it with other Lego components to build creative control structures, such as robotic...
 2
Available
Motorized

M5STACK SERVO2 Module 16 Channels - 13.2 (PCA9685)

SERVM5S9685
€18.92
SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. The maximum total power output of dual channel is 35W (5V / 3.5A * 2), and the maximum output power...
 2
Available
Robots

2WD Smart car kit, smart line tracking, engine,...

ROB2WDELECKIT
€12.50
This a well designed, Arduino compatible mobile robot development platform,you can build it and program it easily with tons of published free codes. Compare with the last mobile platform, this one has a light body with mounting holes, you can add Variety of sensors to make it more interesting.
 2
Out of stock
ESP32

M5Stack K033 - Kit robot BugC sans M5StickC

MCBM5SBUGC
€14.58
Description BugC is a programmable robot base compatible with the M5StickC. This has four DC motors, motor driver, two RGB LEDs, battery holder and a switch. The Bugc base needs to be used in conjunction with the M5StickC controller. The base comes with an STM32F030F4 micro controller which controls all the motors and LEDs and this is controlled through...
 2
Out of stock
ESP32

M5Stack K036-B - Kit robot Rover C Pro sans...

MCBM5FDEVROV
€63.00
The RoverC is a programmable, omnidirectional mobile robot base compatible with the M5stickC, and can be started by inserting the M5stickC. The main controller of the base is the stm32f030f4 microcontroller. The base is supplied with N20 worm gear motors which are directly controlled by a four channel motor driver. These motors are connected to mechanical...
 2
Available
Robots

130 Brush Motor Mini Wind Educational Toy DIY...

ROB4WDACRE
€12.50
A simple mechanical structure, very convenient platform to build upon with one DC motors that can be controlled . Two levels of acrylic plates to allow for bigger electronics. Very simple assembly.
 2
Out of stock
Robots

micro: Maqueen Lite-micro:bit Educational...

ROBMAQ2WD
€28.75
micro: Maqueen Lite-micro:bit Educational Programming Robot Platform I am Maqueen Hello, my name is Maqueen, is a graphical programming robot for STEM education, which inherits playability and simple operation of micro:bit. The Mini-body, interesting features and plug-and-play allow children to quickly learn graphic programming in entertaining, nurturing...
 2
  • Reduced price / -€10.00
Available
Robots

4-DOF Metal Robot Arm Kit for Raspberry Pi,...

ROBWS4DOF
€40.00 €50.00
Equip your Raspberry Pi with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic. This starter robotic arm kit includes: servo driver HAT, metal mechanical arm structure, and 4x metal gear servos. When used with the Raspberry Pi, it is easy to control the arm by smart phone through Bluetooth or WiFi connection.
 2
Available
Prototyping

Servo head bracket two degrees bracket set...

ROBJANGRIP
€8.25
This tiny gripper uses a rack-and-pinion design with a servo-driven pinion and opposing racks to keep the gripper's paddles synchronized and parallel to each other throughout its 55mm range of motion.
 2
Out of stock
Robots

POLOLU MICRO GRIPPER KIT WITH POSITION FEEDBACK...

ROBPOLGRIPKIT
€18.33
This small gripper uses a rack and pinion design with a servo-driven pinion and opposing racks to keep the gripper paddles synchronized and parallel to each other throughout its 32 mm range of motion. It includes a special micro servo with an additional wire that gives access to its feedback potentiometer, so you can track the actual position of the...
 2
Out of stock
Motorized

Omni Wheel - 48mm big core wheel (Pack of 4)...

WHLSEDOMN48
€9.00
The omni-wheel has a big core wheel, along which peripheral there are many additional small wheels that have the axis perpendicular to the axis of the core wheel. The core wheel can rotate around its axis like any normal wheel, but now that there are additional wheels perpendicular to it, the core wheel can also move parallel to it's own axis. A robot...
 2
  • Reduced price / -€5.00
Available
Robots

4WD Robot Double Smart Car Chassis Kit (ideal...

ROB4WDACR
€20.00 €25.00
A simple mechanical structure, very convenient platform to build upon with 4 DC motors that can be controlled separately. Two levels of acrylic plates to allow for bigger electronics. Very simple assembly.
 2
Available
Robots

2WD Light Mobile platform (ideal for Arduino)...

ROB2WDACRENC
€10.00
This a well designed, Arduino compatible mobile robot development platform,you can build it and program it easily with tons of published free codes. Compare with the last mobile platform, this one has a light body with mounting holes, you can add Variety of sensors to make it more interesting.
  • Reduced price / -€10.00
Available
Robots

2WD Arduino Mobile platform (Arduino...

SESROB102F3M
€35.00 €45.00
This a well designed, Arduino compatible mobile robot development platform,you can build it and program it easily with tons of published free codes. Compare with the last mobile platform, this one has a tough aluminium body with mounting holes, you can add Variety of sensors to make it more interesting.
Product added to wishlist
Product added to compare.