This product is a led-matrix dot-matrix-led-display modul, which compatible with Raspberry Pi B+, 2, 3 and B board. The insertion method for B+/2/3 is the same as that of B. The pin GPIO1 on Raspberry Pi B+ corresponds to GPIO1 on Raspberry Pi B.
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
Product Name： LED light strips, 60 LEDs per meter, 5050 (5*5mm) LED
Working voltage： DC12V， apply this voltage should work fine.
Power：Roughly 10W per meter, 1A Current
Color： Full white
Life cycle： 50K hours, attenuation 0.6% every year
Bared LED strip without any water-proof or plastic sleeve protection,...
The MAX6969 serial-interfaced LED driver provides 16 open-drain, constant-current-sinking LED driver outputs rated at 5.5V. The MAX6969 operates from a 3V to 5.5V supply. The MAX6969 supply and the LEDs' supply or supplies can power up in any order. The constant-current outputs are programmed together to up to 55mA using a single external resistor. The...
Digital RGB LED Flexi-Strip is an intelligent light source consist s of WS2812B RGB LED with Integrated Driver Chip. The control circuit and RGB chip are integrated in a package of 5050 components.
This LED flexible strip is a full-color that external control for each lamp beads. It with high brightness, can achieve effects of full color running water,...