Arduino

 2
Available
Prototyping

Arduino Stackable Header Kit (Arduino Compatible)

CONITEARDSTKHDR
€1.25
This pack includes: 2 pcs 6-pin lengthen female headers 2 pcs 8-pin lengthen female headers They all have 2.54mm spacing between pins and they are the perfect height for clearing the USB-B connector and great for stacking multiple shields.Their long legs also make it enough to connect a shield to an Arduino Main Board.
 2
Available
Electronics

Active Speaker Buzzer Module 5V (Arduino...

MODBUZZ5V
€1.50
Active Buzzer is an integrated structure electronic transducers, DC voltage supply, widely used in computers, printers, copiers, alarms, electronic toys, automotive electronic equipment, telephones, timers and other electronic products for sound device.
 2
Available
Main Boards and Compatible

Digispark Attiny Micro USB Development Board...

MCBDISPAMICROUSBB
€1.58
The Digispark is an Attiny based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too...
Available
Dev. Tools

ATtiny45-20PU (microcontroller, 8-bit, 4kB...

ELCARDATTINY45
€1.75
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 4KB ISP flash memory, 256-Byte EEPROM, 256B SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter,...
 2
Available
Dev. Tools

ATtiny85-20PU (microcontroller, 8-bit, 8kB...

ELCARDATTINY85
€2.00
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit A/D converter,...
Available
Electronics

Battery Charging StepUp Power Supply Module...

POWSEDLITCHM
€3.25
The module is used for charging of single lithium battery or multiple lithium batteries in parallel, and the charging port can take power from the USB port. output USB micro usb input / usb output / and charging lipo
 2
Available
Display

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
€3.50
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
 2
Available
3D Printing

V1.0 module for motor filter 3D printer controller

ASHRAMPS
€3.75
TL-smooth is an add-on module for 3D printer stepper motor drivers     The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against induction voltages in the unpowered state of the driver     You will get smoother movement especially on the delta style 3Dprinter under DVR8825 stepper drivers and A4988 /...
 2
Available
Dev. Tools

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
€3.92
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
Available
Main Boards and Compatible

Digispark Attiny85 Micro USB Development Board...

MCBDISPAMICROUSB
€4.00
The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too...
Available
Dev. Tools

nRF24L01+ 2.4Ghz RF module (improved range)

iTeadStudio
WIRITENRF24L01
€4.00
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
 2
Available
Dev. Tools

PL2303 USB to UART (TTL) breakout

iTeadStudio
USBITEPL23035V
€4.08
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example. It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.
 2
Available
Dev. Tools

ATtiny 13 45 85 Programmer AVR Shield

PRGELDAVRSHDATT
€4.58
This is AVR programmer, designed as a arduino shield. In this way, you can program most of the AVR ICs with arduino IDE and using arduino board as ISP. The AVR Programmer Shield allows you to program ATtiny and ATmega microcontrollers using your Arduino. Instead of pulling out the breadboard and wiring everything up every time you want to (re)program a...
Available
Dev. Tools

CAN-BUS MCP2515 Module TJA1050 Receiver SPI...

CANBUSSEDSHIELD
€5.00
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus.
Available
Dev. Tools

Arduino-Compatible Pro Mini [16M/5V, 8M/3V3]

MCBARDPROMIN
€5.42
The minimal design approach to EDArduino, and fully compatible with arduino. This is a 5V EDArduino running the 16MHz bootloader (select ‘Arduino pro mini′ within the Arduino software). EDArduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time EDArduino...
 2
Available
Shields

Grove Shield for Pi Pico v1.0

Seeed Studio
BASSEDROPICO
€5.42
The Grove Shield for Pi Pico v1.0 is a plug-and-play shield for Raspberry Pi Pico which integrates with various kinds of Grove connectors, such as  I2C, UART, Digital, Analog ports. It enables the build prototype and project in an easy and quick way without solder and jumper wire , you could explore infinite possibilities of Pico.
 2
Available
Shields

Grove Shield for Arduino Nano 33

Seeed Studio
BASSEDRONANO
€5.42
Grove Shield for Arduino Nano provides you a simple way to connect with Arduino Nano and also Seeeduino Nano.This shield help you get rid of breadboard and jumper wires by pulling out the pins of the motherboard and expands to 8 Grove connectors. V1.1 version supports the Arduino Nano 33 series development board.
 2
Available
Dev. Tools

FT232RL Tiny Breakout (USB FTDI UART TTL)

USBITD00001B
€5.67
FT232RL breakout. The FT232RL is a USB to serial UART interface with optional clock generator output. It’s the essential tools for establishing communication between PC and mostly MCU. Especially, it’s the optimum tool for basic boards without without USB interface, like arduino pro, colorduino, etc.
Product added to wishlist
Product added to compare.