Arduino

 2
Available
Home

Xadow - Main Board

MCBXADMAIN
€22.00
The module is a microcontroller board based on the controller ATmega32U4 with 32k flash. Board can be powered either from the USB connection or a Lithium battery(80mA output current). And the board can charge for the Lithium battery through the USB port. The USB port on the board can be also used for upload program.When you upload program to the Xadow...
 2
Available
Dev. Tools

Wireless XBEE SD Shield (SD, Micro-SD Card and...

ECRMCS01109S
€11.67
The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type....
 2
  • Reduced price / -€10.00
Available
Main Boards and Compatible

WIFI Mega 2560 R3 + ESP8266 (32MB RAM) USB-TTL...

MCB00004BW
€22.00 €32.00
Caractéristiques: Intégration complète sur une seule carte: Mega R3 ATmega2560 et WiFi ESP8266 avec mémoire 32 mo (mégaoctets) Tous les modules peuvent fonctionner ensemble ou chacun séparément. Et chacun a ses propres têtes de brochage La solution pratique pour le développement de nouveaux projets nécessitant Uno et WiFi Via USB, vous pouvez mettre à...
  • Reduced price / -€2.00
Out of stock
Dev. Tools

Wemos D1 (ESP8266, Arduino-compatible layout,...

MCBWEMD1
€10.50 €12.50
The D1 is an Arduino Uno-like wifi board based on ESP-8266EX. 11 digital input/output pins 1 analog input(3.3V max input) a Micro USB connection a power jack, 9-24V power input. Compatible with Arduino
 2
Available
Ethernet

W5100 Ethernet Shield for Arduino (Arduino...

ECRASW51001E
€13.75
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The...
 2
Available
3D Printing

V1.0 module for motor filter 3D printer controller

ASHRAMPS
€3.75
TL-smooth is an add-on module for 3D printer stepper motor drivers     The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against induction voltages in the unpowered state of the driver     You will get smoother movement especially on the delta style 3Dprinter under DVR8825 stepper drivers and A4988 /...
 2
  • New
Available
Dev. Tools

USB to TTL for ESP32, Downloader, M5Stack

USBTTLESP32
€6.67
ESP32 Downloader Kit is a USB-TTL adapter board for ESP32 /ESP8266, This item contains CP2104/CH9102 chip. It supports one-touch download without chip and pin down resetting manual . Plug-in board and row of pins parts from the set can be so convenient for ESP32/ESP8266 series development board or M5Stack series products for program burning or serial...
 2
  • Reduced price / -€8.10
Available
Dev. Tools

UNO BT HC-05 (Arduino-compatible with built-in...

iTeadStudio
MCB00001
€23.57 €31.67
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
Available
Dev. Tools

UNO R3 ATmega328 chip (Arduino Compatible UNO R3)

MCB00003C
€12.50
The Uno is a microcontroller board based on the ATmega328 and compatible with the Arduino Uno R3. It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or...
 2
Available
Dev. Tools

UNO R3 (Arduino Compatible ) CH340

MCB00003B
€9.58
The Uno is a microcontroller board based on the ATmega328 and compatible with the Arduino Uno R3. It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or...
 2
  • New
Out of stock
Dev. Tools

Teensy 4.1 USB Dev Board (Pinless)

MCBTEENSY41
€30.83
Product overview      Teensy 4.1 USB Microcontroller Development Board (pinless)      Offers an Arduino-compatible 32-bit microcontroller      Designed to bring all general purpose I/O pins      Features the fastest microcontroller      Can be programmed using the Arduino IDE      Breadboard compatible pads on outer edges
 2
  • Reduced price / -€1.10
Available
Dev. Tools

TEA5767 Radio FM Stereo Module for Arduino...

FMTAO5767
€8.07 €9.17
LC harmonic oscillator use low cost fixed chipNo need to adjust Intermediate frequencyHigh sensitivity(low noise RF input amplifier)High power auto gain control AGC circuitSoft mute
 2
Available
Dev. Tools

SSC-32U USB 32 Servo Controller Atmega 328P

ECRACSPWM32
€33.33
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
 2
Available
Dev. Tools

Sipeed Longan Nano - RISC-V GD32VF103CBT6...

MCBSEENANOGD32
€7.50
Sipeed Longan Nano is a development board based on GD32VF103CBT6 MCU with RISC-V 32-bit core of GigaDevice. It is convenient for students, engineers and geek enthusiasts to contact the new-generation RISC-V processor. Longan Nano sold by Seeed comes with a 0.96inch 160x80 IPS RGB LCD
 2
Available
Dev. Tools

Sensor Shield V5.0 For Arduino (servos)...

ECRACS04525S
€8.25
Latest Arduino sensor Shield V5.0 reserves advantages of Arduino Sensor V4.0,such as lamination design, PCB immersion god process, and main board extend all the figures and analog interfaces of Arduino controller. I2C interface, 32 steering engineer controller interface, Bluetooth module communication interface ,SD card module communication interface,...
 2
Available
Dev. Tools

Sensor Shield V4.0 For Arduino (Arduino...

ECRMCS01002S
€7.00
Arduino Sensor Shield V4.0 let us to build electronics projects just as easy as piling bricks. It can connect to various modules like sensors, servos, relays, buttons, potentiometers. Just plug & play. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm...
 2
  • Reduced price / -€11.00
Available
Electronics

Sensor Kit for Arduino and Raspberry pi

SESTAOBRSK
€30.67 €41.67
This is a Starter kit of electronic brick; it includes basic components and sensors. You can build many interesting projects even if you don't know anything about soldering that makes it the best choice for beginners.
 2
Product available with different options
Electronics

Seeeduino V3.0 (Atmega 328P)

BOASEDARDV3
Seeeduino is Arduino compatible board. Based on Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs. On the hardware part, remarkable changes are taken to improve the flexibility and user experience. 
 2
  • Reduced price / -€10.00
Out of stock
Dev. Tools

Seeeduino Lite

ARDSEDLITE
€13.67 €23.67
Seeeduino Lite differs from all Arduino boards in that the voltage select switch affects the I/O output voltage, high level of I/O output is consistent with voltage switch. And there are I2C Interfaces、UART Interfaces and Grove Interfaces provide convenience for connecting Grove modules.
 2
  • Reduced price / -€25.60
Available
Network

Seeeduino Ethernet MEGA328P

ETHSEDARD
€37.40 €63.00
Seeeduino Ethernet is a compact and multifunctional development platform, which merges data logging and processing, device control and Ethernet communication together into one. It's armed with a MEGA328P chip and a Wiz5100: the former provides an Arduino controlling style and the latter provides TCP and UDP Ethernet communication ability.
Available
Arduino

SD Micro SD Card Grove Shield

ASHSESSDCARD
€10.83
SD card shield is a Break out board for standard SD card. With flash memory card price dropping,it is the time to add mass storage and data logging to your project. You can select 3.3V or IO port power supply with the switch on board in order to work with different library.
 2
Out of stock
Prototyping

ScrewShield for Arduino NANO (Arduino Compatible)

ASH00001B
€6.67
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
 2
Available
Dev. Tools

Screw Shield with Protoboard (Aduino Compatible)

ECRMCS01110
€8.33
The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and a 5mm green LED.
 2
Available
Dev. Tools

Screw Shield

ASHSESSCREW
€6.25
Screw shield is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks.
  • Reduced price / -€5.00
Available
Dev. Tools

Relay Shield (For UNO)

ASHSESRELU
€10.00 €15.00
The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by Arduino’s Digital I/Os. Standardized shield form factor enables smoothly connection with the Arduino. The shield also has four...
  • Reduced price / -€2.50
Available
Dev. Tools

Relay Shield

ASHSESRELY
€11.00 €13.50
The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by Arduino’s Digital I/Os. Standardized shield form factor enables smoothly connection with the Arduino. The shield also has four...
 2
Available
3D Printing

RAMPS 1.5 5x Stepper motor driver mount shield...

ASHRAMPS15
€12.50
RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an...
Available
Electronic drivers

RAMPS 1.4 5x Stepper motor driver mount shield...

ASHRAMPS14
€12.50
RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an...
 2
Available
Arduino

Protoshield Kit Remixed for Arduino (Arduino...

Seeed Studio
ASHSESARDPROTOSHIELD
€9.92
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom...
Product added to wishlist
Product added to compare.