Arduino

 2
  • Reduced price / -€8.10
Available
Dev. Tools

UNO BT HC-05 (Arduino-compatible with built-in...

iTeadStudio
MCB00001
€23.57 €31.67
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
 2
  • Reduced price / -€5.10
Available
Prototyping

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
€7.40 €12.50
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
Available
Display

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
€3.50
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
 2
Available
Dev. Tools

Foca Pro : FT232RL Tiny Breakout (FTDI USB to...

USBITD00001
€9.17
Foca is a FT232RL breakout. The FT232RL is a USB to serial UART interface with optional clock generator output. It’s the essential tools for establishing communication between PC and mostly MCU. Especially, it’s the optimum tool for basic boards without without USB interface, like arduino pro, colorduino, etc. The good point is that it also supports the...
 2
Available
Dev. Tools

PL2303 USB to UART (TTL) breakout

iTeadStudio
USBITEPL23035V
€4.08
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example. It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.
 2
Available
Power and Energy

Mini Solar/Lipo Charger Board

ENESESLIPORIDER05
€10.00
In our application, especially in some outdoor applications, we often need to use the lithium battery, lithium battery charging problem is a need to solve the problem, we designed this mini lithium battery charging board. Board size is very small , It can u solar
Available
Electronics

Battery Charging StepUp Power Supply Module...

POWSEDLITCHM
€3.25
The module is used for charging of single lithium battery or multiple lithium batteries in parallel, and the charging port can take power from the USB port. output USB micro usb input / usb output / and charging lipo
  • Reduced price / -€16.20
Available
Sales

8x5 WS2812 RGB Led Matrix Shield with...

LMARGB8X5WS2812
€9.80 €26.00
Put on your sunglasses before putting this shield onto your 'duino - 40 eye-blistering RGB LEDs adorn the panel for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization.
 2
  • Reduced price / -€10.00
Available
Main Boards and Compatible

WIFI Mega 2560 R3 + ESP8266 (32MB RAM) USB-TTL...

MCB00004BW
€22.00 €32.00
Caractéristiques: Intégration complète sur une seule carte: Mega R3 ATmega2560 et WiFi ESP8266 avec mémoire 32 mo (mégaoctets) Tous les modules peuvent fonctionner ensemble ou chacun séparément. Et chacun a ses propres têtes de brochage La solution pratique pour le développement de nouveaux projets nécessitant Uno et WiFi Via USB, vous pouvez mettre à...
 2
Out of stock
Wireless Connectivity

GPS Lora SD Shield for Raspberry Pi 3 B+, R2...

ASHELEGPSSHIELDRPI
€12.50
GPS: Use GPS module Ublox Neo-7M, or NEO-6M or ATGM332 compatible GPS module. All have the same performace. Fast and high speed locating. By test with our 3M meter GPS antenna, fixed in 30 seconds by small ceramic antenna fixed in 3- 10 mintues, in brand new module. On board backup battery, for next time quick fix location. On board 1PPS fix GPS LED to...
 2
Available
Dev. Tools

FT232RL Tiny Breakout (USB FTDI UART TTL)

USBITD00001B
€5.67
FT232RL breakout. The FT232RL is a USB to serial UART interface with optional clock generator output. It’s the essential tools for establishing communication between PC and mostly MCU. Especially, it’s the optimum tool for basic boards without without USB interface, like arduino pro, colorduino, etc.
 2
Available
Dev. Tools

Sipeed Longan Nano - RISC-V GD32VF103CBT6...

MCBSEENANOGD32
€7.50
Sipeed Longan Nano is a development board based on GD32VF103CBT6 MCU with RISC-V 32-bit core of GigaDevice. It is convenient for students, engineers and geek enthusiasts to contact the new-generation RISC-V processor. Longan Nano sold by Seeed comes with a 0.96inch 160x80 IPS RGB LCD
 2
  • New
Available
Dev. Tools

USB to TTL for ESP32, Downloader, M5Stack

USBTTLESP32
€6.67
ESP32 Downloader Kit is a USB-TTL adapter board for ESP32 /ESP8266, This item contains CP2104/CH9102 chip. It supports one-touch download without chip and pin down resetting manual . Plug-in board and row of pins parts from the set can be so convenient for ESP32/ESP8266 series development board or M5Stack series products for program burning or serial...
 2
  • Reduced price / -€2.44
Available
Arduino

Bees Shield

Seeed Studio
SESINT119B2P
€6.67 €9.11
Bees shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. Aside from dual Bee style 20p 2.0 pitch socket, it also has large proto area, customizable software, serial, port for easier prototyping.
Available
Arduino

SD Micro SD Card Grove Shield

ASHSESSDCARD
€10.83
SD card shield is a Break out board for standard SD card. With flash memory card price dropping,it is the time to add mass storage and data logging to your project. You can select 3.3V or IO port power supply with the switch on board in order to work with different library.
 2
Available
Shields

Grove Shield for Pi Pico v1.0

Seeed Studio
BASSEDROPICO
€5.42
The Grove Shield for Pi Pico v1.0 is a plug-and-play shield for Raspberry Pi Pico which integrates with various kinds of Grove connectors, such as  I2C, UART, Digital, Analog ports. It enables the build prototype and project in an easy and quick way without solder and jumper wire , you could explore infinite possibilities of Pico.
Available
Dev. Tools

nRF24L01+ 2.4Ghz RF module (improved range)

iTeadStudio
WIRITENRF24L01
€4.00
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
 2
Available
Shields

Grove Shield for Arduino Nano 33

Seeed Studio
BASSEDRONANO
€5.42
Grove Shield for Arduino Nano provides you a simple way to connect with Arduino Nano and also Seeeduino Nano.This shield help you get rid of breadboard and jumper wires by pulling out the pins of the motherboard and expands to 8 Grove connectors. V1.1 version supports the Arduino Nano 33 series development board.
 2
  • Reduced price / -€5.50
Available
Arduino

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
€6.50 €12.00
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
 2
Available
Dev. Tools

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
€3.92
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
 2
Available
Arduino

Protoshield Kit Remixed for Arduino (Arduino...

Seeed Studio
ASHSESARDPROTOSHIELD
€9.92
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom...
 2
Available
Dev. Tools

Arduino Mini 05 (light / without headers)...

Arduino
MCBARDMINI05LIGHT
€15.50
The Arduino Mini is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet The new Mini (revision 05) has a new package for the ATmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04....
 2
Available
Dev. Tools

GPS Logger Shield Arduino , Ublox Neo-6M R2

ASHELEGPSSHIELD
€16.58
Arduino GPS shield is a GPS module breakout board for Arduino. It can make your Arduino as a GPS receiver with SD storage, it is easy to use for recording the position data into SD card by Arduino
 2
  • Reduced price / -€10.00
Available
Arduino

Makey Makey invention kit

MCBMMKIT
€27.50 €37.50
MaKey MaKey is an invention kit for the 21st century. Turn everyday objects into touchpads and combine them with the internet. It's a simple Invention Kit for Beginners and Experts doing art, engineering, and everything inbetween.
 2
Available
Prototyping

Arduino Stackable Header Kit (Arduino Compatible)

CONITEARDSTKHDR
€1.25
This pack includes: 2 pcs 6-pin lengthen female headers 2 pcs 8-pin lengthen female headers They all have 2.54mm spacing between pins and they are the perfect height for clearing the USB-B connector and great for stacking multiple shields.Their long legs also make it enough to connect a shield to an Arduino Main Board.
 2
  • Reduced price / -€10.00
Available
Display

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
€30.00 €40.00
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
  • Reduced price / -€11.00
Available
Electronics

Sensor Kit for Arduino and Raspberry pi

SESTAOBRSK
€30.67 €41.67
This is a Starter kit of electronic brick; it includes basic components and sensors. You can build many interesting projects even if you don't know anything about soldering that makes it the best choice for beginners.
 2
  • Reduced price / -€3.75
Available
Arduino

EL Shield

ASHSESEL
€20.00 €23.75
The EL Shield is another easy-to-use shield for your control of EL devices, fits with Arduino and Seeeduino. You will be able to control 4 EL devices simultaneously and separately. The controlling method is as simple as controlling an LED. Driven by PWM, it can create a colorful and florid effect by controlling each EL wire according to your own programs.
 2
Available
Dev. Tools

Base Shield V2

Seeed Studio
ASHSESBASE
€8.00
As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.
  • Reduced price / -€2.50
Available
Dev. Tools

Relay Shield

ASHSESRELY
€11.00 €13.50
The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by Arduino’s Digital I/Os. Standardized shield form factor enables smoothly connection with the Arduino. The shield also has four...
 2
Out of stock
Dev. Tools

Arduino Micro (without headers)

Arduino
MCBARDMICRO
€16.58
The Arduino Micro is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer...
 2
Available
Display

ITDB02 Arduino Shield (Arduino Compatible)

ASHITDB02
€9.00
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino pins, for that reason, this Arduino shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
 2
Available
Home

Dual stepper motor shield

iTeadStudio
ASHITEDUASTE
€11.58
Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 30V. High accuracy controlling can be supported by Arduino for CNC milling machine.
Available
Dev. Tools

AVR USB Programmer

Seeed Studio
PRGSEDAVRUSB
€24.00
This is a cheap usb programmer for the AVR chips (like the Arduino ones).
 2
Available
Dev. Tools

Screw Shield

ASHSESSCREW
€6.25
Screw shield is a wing-like shield that extends both sides of your Arduino or Arduino variants into sturdy and reliable screw terminal blocks.
 2
  • Reduced price / -€2.90
Available
Electronics

Energy Shield

Seeed Studio
ASHSESENESH
€18.00 €20.90
Energy Shield is a LiPo battery based power shield that keeps your project alive. It keeps its battery charged whenever an available power source exists. It accepts a wide range of power sources, from common solar cells via JST connector and USB via USB port on microcontroller, to 9V and 12V DC adapters via DC Jack on your Arduino. Meanwhile it can not...
 2
Product available with different options
Arduino

ITeaduino Nano USB Microcontroller

iTeadStudio
MCB00002C
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
 2
Available
Home

ITeaduino Tiny

iTeadStudio
MCBITDTINY
€7.50
Iteaduino Tiny is a mini development board based on Attiny85 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
 2
Out of stock
Dev. Tools

iTead 3G shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITE3G
€62.50
The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.
 2
Available
Dev. Tools

Sensor Shield V5.0 For Arduino (servos)...

ECRACS04525S
€8.25
Latest Arduino sensor Shield V5.0 reserves advantages of Arduino Sensor V4.0,such as lamination design, PCB immersion god process, and main board extend all the figures and analog interfaces of Arduino controller. I2C interface, 32 steering engineer controller interface, Bluetooth module communication interface ,SD card module communication interface,...
Product added to wishlist
Product added to compare.