Dev. Tools

 2
Out of stock
Arduino

iTead WiFi shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITEWIFI
€50.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
 2
Out of stock
Main Boards and Compatible

Arduino Leonardo (with headers)

Arduino
MCBARDLEONARDO
€20.50
This is the official current low-cost Arduino board, top quality, made in Italy and with a Zero Carbon Footprint! The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an...
 2
Out of stock
Dev. Tools

DSO Nano V3 (handheld digital storage...

Seeed Studio
MESSESDSONANOV3
€78.00
DSO Nano v3 is a 32bit digital storage oscilloscope. Based on ARM -M3, it’s equipped with 320*240 color display, SD card, USB port and recharging function. It’s compact, simple to operate; meets the basic demands of school lab, electric furniture repairmen and electric engineering. The version 3 of DSO Nano differs from version 2 in that it does not use...
 2
Out of stock
Dev. Tools

SD/Micro-SD Card Reader Breakout Module

MODITDMICSDSD
€3.33
This is a SD / MicroSD card breakout board, and it will allow you to breakout the SD/MMC socket to a standard 0.1" x 6-pin header. It can work with 5V or 3.3V power supply, and both 5V/3.3V IO operation level. It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.
 2
  • Reduced price / -€2.05
Available
Dev. Tools

W5100 Ethernet Network Module Breakout Board

NETW5100
€13.00 €15.05
It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.
 2
  • Reduced price / -€5.00
Out of stock
Dev. Tools

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
€7.00 €12.00
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
 2
Out of stock
Dev. Tools

DevDuino Sensor Node V2 (ATmega 328, AAA...

Seeed Studio
MCBDDUSNODV2
€16.67
DevDuino Sensor Node V2 is a compact Arduino-compatible microcontroller and is designed to build wireless networks based on transceiver nRF24L01+. You can easily connect other sensors or actuators to this platform, to build your remote monitoring or controlling system.
Out of stock
Dev. Tools

NUCLEO-L433RC-P ARM STM32 Nucleo-64 development...

ST Microelectronics
MCBSTNUCL433RC
€16.60
The STM32 Nucleo-64-P boards (NUCLEO-L433RC-P, NUCLEO-L452RE-P) provide an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features.
Available
Dev. Tools

STM32 Nucleo-64 development board with...

ST Microelectronics
MCBSTM32DISL452
€15.50
The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™Uno V3 connectivity support and the ST morpho headers allow to expand easily the functionality of the STM32...
Available
Dev. Tools

NUCLEO-L152RE (STM32 Nucleo development board...

ST Microelectronics
MCBSTNUCL152RE
€14.00
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo...
 2
Out of stock
Dev. Tools

NUCLEO-F411RE (STM32 Nucleo development board...

MCBSTNUCF411RE
€14.00
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer. The...
Out of stock
Dev. Tools

M24SR-DISCOVERY (Discovery kit for the M24SR...

ST Microelectronics
MCBM24SRDISCO
€30.00
The M24SR-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the M24SR series and is based on the M24SR64 device. The M24SR64 device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbits EEPROM memory. It can be operated from an I2C interface or by a 13.56 MHz RFID reader or an NFC phone. The I2C interface...
 2
Out of stock
Dev. Tools

STM32F7 Discovery Board (Discovery kit with...

ST Microelectronics
MCBSTDISF7
€62.50
Wow, who said a micro-controller couldn't be fast ? This one is, very fast, with a lot of ram and flash. Sky is the limit on this one. It even has ethernet connectivity, two usb ports (three with the built-in programmer), audio in&out, etc. By the way, did I mention this is our new toy here at HackSpark ? We love it ! The STM32F7 discovery kit allows...
 2
Out of stock
Dev. Tools

Radxa Rock Pro - Quad Core Single-board...

LINRADXAROCKPRO
€107.50
Radxa’s new product for single-board computers. The CPU is ARM Cortex-A9 processor running from 324Mhz to 1.6Ghz, and can balancing between performance and power saving. It integrate with full interfaces, all ways to connect like Wifi, Bluetooth, HDMI, USB, Spdif, MIC and TF Card.   As a barebones single-board computer, the key feature for 80 pins 2.54mm...
 2
Out of stock
Dev. Tools

BTBee (Bluetooth Bee, serial tu bluetooth module)

iTeadStudio
WIRITEBTBEE
€18.38
BTBee is an easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup. It can directly plug into the Bee sockets and use the UART port for Bluetooth communication.
 2
Out of stock
Dev. Tools

DevDuino Sensor Node V3 (ATmega 328)

MCBDDUSNODV3
€24.92
devDuino Sensor Node V3 is a compact Arduino-compatible microcontroller and is designed to build wireless networks based on transceiver nRF24L01+. You can easily connect other sensors or actuators to this platform, to build your remote monitoring or controlling system
 2
Out of stock
Dev. Tools

BT (Bluetooth) BLE Shield for Arduino

iTeadStudio
ASHITEBTBLE
€24.50
BLE shield is to adapt Bluetooth Low Energy to serial port, which is specifically designed for Arduino motherboard and compatible boards, plug and play.
Out of stock
Dev. Tools

Debugger DevPack for SensorTag Dev Kit (CC2650...

PRGCC2560
€18.33
The Debugger DevPack plugs into the SimpleLink™ SensorTag Evaluation Kit expansion header to debug the kit. With SensorTag technology you can easily develop Cloud applications using the SensorTag app that is available via iOS and Android. In terms of debugging software, you can use either Code Composer Studio (the DevPack includes a free Code Composer...
 2
Out of stock
Dev. Tools

Arduino Mini 05 (with headers) (Arduino...

Arduino
MCBARDMINI05
€14.13
The Arduino Mini is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the USB...
 2
Out of stock
Dev. Tools

Grove Mixer Pack V2

Seeed Studio
SENSESGROMIXPACV2
€40.83
The Grove - Mixer Pack is stand-alone,Lego-like electronic.The Mixer Pack consists of 13 mini modules,there are Power,Logic,Sensors and Actuators, It is a group of Grove compatible modules designed for quickly building functional prototypes. They are tiny, colorful modules that are accessible and fun for children.With this kit you can integrate circuits...
 2
Out of stock
Official Boards

Arduino Yún (Arduino, Linux and WiFi in one...

Arduino
MCBARDYUN
€60.00
The Arduino Yún is a microcontroller board based on the ATmega32u4 (datasheet) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog...
 2
Out of stock
Prototyping

Seeeduino Stalker - Waterproof Solar Kit

Seeed Studio
MCBSEDSTALWPRO
€57.69
Seeeduino Stalker - Waterproof Solar Kit is based on the Seeeduino Stalker v2.3 which is a feature rich Arduino compatible Wireless Sensor Network node and it's modular structure and onboard peripherals makes it convenient to log and time stamp sensor data on a periodic basis. The Seeeduino Stalker is a candidate for all your tracking, monitoring and...
 2
Out of stock
Dev. Tools

Intel GalileoV2 Arduino Developement Board...

Arduino
MCBARDGALI
€62.50
Galileo V2 is a microcontroller board based on the Intel® Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip (datasheet). It’s the first board based on Intel architecture designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND...
 2
  • Reduced price / -€3.50
Available
Dev. Tools

FunDuino UNO (ATMega 328P board compatible with...

MCBFUNUNO
€12.50 €16.00
The FunDuino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer...
 2
  • Reduced price / -€10.00
Out of stock
Dev. Tools

Blend Micro - an Arduino-Compatible Development...

Arduino
BLENDMICRO
€25.00 €35.00
Blend Micro is Red Bear's first integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily.   The micro-controller unit (MCU) is Atmel ATmega32u4 and the BLE chip is Nordic...
Product added to wishlist
Product added to compare.