Dev. Tools

 2
Available
Home

Xadow - Main Board

MCBXADMAIN
€22.00
The module is a microcontroller board based on the controller ATmega32U4 with 32k flash. Board can be powered either from the USB connection or a Lithium battery(80mA output current). And the board can charge for the Lithium battery through the USB port. The USB port on the board can be also used for upload program.When you upload program to the Xadow...
 2
Product available with different options
Dev. Tools

X-LINKEX V1.1: Cortex M3/M0 JTAG/SW Debugger

CRTIMXLINK
€10.00
X-LinkEX is a Cortex M3/M0 JTAG/SW hardware debugger and programmer that compatible with coocox software.It directly supports CooCox CoDebugger and CooCox CoFlash , Also integrates seamlessly into IAR Embedded Workbench, Keil RealView MDK as colink.
Available
Home

Wolfson Audio Card

SNDRPIWOLFSON
€37.50
The Wolfson Audio Card, produced in collaboration with Wolfson, the premier mixed-signal semiconductor and audio solutions company, offers Raspberry Pi® users similar flexibility to a PC soundcard to capture audio alongside their camera, and experiment with stereo digital capture and playback.
 2
Available
Dev. Tools

Wireless XBEE SD Shield (SD, Micro-SD Card and...

ECRMCS01109S
€11.67
The Wireless SD card shield allows an Arduino board to communicate wirelessly using a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi, but can use any Bee module with the same footprint. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type....
 2
Available
Electronics

Wio Link (ESP8266, Grove and Battery charging...

MCBWIOLINK
€17.50
Wio Link is designed to simplify your IoT development. It is an ESP8266 based open-source Wi-Fi development board to create IoT applications by virtualizing plug-n-play modules to RESTful APIs with mobile APPs. The traditional methodology of building IoT applications consists of electronic engineering, micro-controller programming, network programming,...
 2
  • Reduced price / -€6.00
Available
Dev. Tools

WiFiMCU Wireless WiFi dev Board (LUA scripting,...

MCBWIFIMCU
€9.00 €15.00
WiFiMCU is developed based on EMW3165 by Headquarters EMW3165. It can run Lua scripts directly; operate hardware resource; achieve product prototypes. EMW3165 is a low-power embedded WiFi module, which is developed by the Shanghai MXCHIP Technology Co., Ltd. It incorporates a WiFi RF-Chip and a microcontroller based on STM Cortex-M4. The WiFi module...
 2
  • Reduced price / -€10.00
Available
Main Boards and Compatible

WIFI Mega 2560 R3 + ESP8266 (32MB RAM) USB-TTL...

MCB00004BW
€22.00 €32.00
Caractéristiques: Intégration complète sur une seule carte: Mega R3 ATmega2560 et WiFi ESP8266 avec mémoire 32 mo (mégaoctets) Tous les modules peuvent fonctionner ensemble ou chacun séparément. Et chacun a ses propres têtes de brochage La solution pratique pour le développement de nouveaux projets nécessitant Uno et WiFi Via USB, vous pouvez mettre à...
 2
  • Reduced price / -€1.50
Out of stock
Dev. Tools

Wifi IoT Relays Board Based on ESP8266 R1.6

RELELDESP
€11.50 €13.00
The purpose of this design is for learning how to play with the hardware and software of a IOT project, it is based on price competitive wifi module ESP8266.
 2
  • Reduced price / -€6.10
Available
ESP32

Widora-AIR ESP32 module WIFI V6 version...

WIRNODMCUAIR
€11.40 €17.50
Widora-AIR V6.0 is an ESP32 (ESP8266 successor with bluetooth) board that is very thin and can be stacked on a breadboard. You can start prototyping you app with bluetooth 4.0 and wifi in a few minutes. Moreover, you can use atom, arduino and other ide to develop for it in a range of languages (C, C++, LUA, Python, etc.)
 2
  • New
Available
Dev. Tools

WeMos Mini D1 Wifi Bluetooth Wireless Board...

WIRELE32DEVBAT
€8.25
ESP32-BAT is a low-footprint, minimal system development board which is powered by our latest ESP-WROOM-32 module and can be easily adjusted to a breadboard.
  • Reduced price / -€2.00
Out of stock
Dev. Tools

Wemos D1 (ESP8266, Arduino-compatible layout,...

MCBWEMD1
€10.50 €12.50
The D1 is an Arduino Uno-like wifi board based on ESP-8266EX. 11 digital input/output pins 1 analog input(3.3V max input) a Micro USB connection a power jack, 9-24V power input. Compatible with Arduino
 2
Available
Wires and Connectors

WAGO Splice 5 terminal installation quick...

CON3MJUNUY6
€2.08
Manufacturer WAGO Type of splice terminal installation quick splice Electrical mounting spring clamp Wire cross section 0.2...4mm2 Connector series 221 Mechanical mounting for cable Rated voltage 450V Current rating 32A Number of ways 1 Number of terminals 5 Connector variant with lever
Available
Wires and Connectors

WAGO 3 Wire terminal installation quick splice...

CON3MJUNUY3
€1.67
Manufacturer WAGO Type of splice terminal installation quick splice Electrical mounting spring clamp Wire cross section 0.2...4mm2 Connector series 221 Mechanical mounting for cable Rated voltage 450V Current rating 32A Number of ways 1 Number of terminals 3 Connector variant with lever
 2
Available
Wires and Connectors

WAGO 2 terminal installation quick splice...

CON3MJUNUY2
€1.25
Manufacturer WAGO Type of splice terminal installation quick splice Electrical mounting spring clamp Wire cross section 0.2...4mm2 Connector series 221 Mechanical mounting for cable Rated voltage 450V Current rating 32A Number of ways 1 Number of terminals 2 Connector variant with lever
 2
  • Reduced price / -€9.00
Available
Ethernet

W5100 Ethernet Shield for Arduino (Arduino...

ECRASW51001E
€8.50 €17.50
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The...
 2
  • Reduced price / -€2.05
Available
Dev. Tools

W5100 Ethernet Network Module Breakout Board

NETW5100
€13.00 €15.05
It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.
 2
Available
Raspberry Pi

Ventilated case aluminum for Raspberry Pi 4 ON...

CASRPI4ARG
€22.50
Argon One Case is an ergonomic and aesthetically pleasing case for people to familiarize with computers and electronics. Made of aluminum alloy and polished with a gray finish, the case gives minicomputers a modern, sleek and stylish appearance, easily attracting users to computers. Its minimalist design keeps cables in one area and provides excellent...
 2
Available
Electronics

USB Wireless Serial Data Transmission Module...

MODYUNTRSMUSB
€3.75
USB wireless serial data transmission module, support AT commands. With a stable CH340T do USB to serial.With this module you can do wireless serial distance transmission (100 ~ 1100m, depending on the use of the wireless module).
 2
  • Reduced price / -€2.55
Available
Dev. Tools

USB Wifi Miniature dongle (pcDuino, Raspberry...

WIRMINUSBWIF
€8.75 €11.30
You can simply plug this USB Wifi dongle into the USB port of your Dev Board and you're ready to connect to a nearby wireless network!
 2
Available
Electronics

USB Wifi dongle with Antenna (pcDuino,...

WIRANTUSBWIF
€14.00
You can simply plug this USB Wifi dongle into the USB port of your Dev Board and you're ready to connect to a nearby wireless network with extra power thanks to its antenna.
Available
Electronics

USB Wifi dongle 150Mbps with Antenna (pcDuino,...

WIRANTUSBWI
€14.17
You can simply plug this USB Wifi dongle into the USB port of your Dev Board and you're ready to connect to a nearby wireless network with extra power thanks to its antenna.
Available
Wires and Connectors

USB to TTL (UART) Cable

CONCBBUSBTTLCAB
€8.25
USB to TTL Cable, specialized for dev boards. 5V
Product added to wishlist
Product added to compare.