Réseau

2
Available
Arduino

Seeed Studio WiFi shield for Arduino (Arduino...

iTeadStudio
ASHSESWLS06201P
45,00 €
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
2
Available
Outils de dev.

IE Shield (Ethernet ENC28J60 and SD Card) for...

ASHITEIESHIELD
25,00 €
IE shield is a Ethernet shield which use the ENC28J60 chip for Arduino. It integrates one Micro-SD card slot and provides main interface breakout. You can use it with Arduino to build your Ethernet development platform.
2
Available
Outils de dev.

ENC28J60 Ethernet Network Module Breakout Board

NETENC28J60
9,00 €
It's a small breakout board for the ENC28J60 Ethernet chip. Contains all the necessary hardware to implement an Ethernet interface including the isolation transformer and LINK/STATUS and power LEDs. SPI interface makes this one of the easiest 10Base-T ICs yet. It's 3.3V with 8KB buffer.
2
Out of stock
Arduino

iTead WiFi shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITEWIFI
50,00 €
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
View
2
  • Prix réduit / -2,05 €
Available
Outils de dev.

W5100 Ethernet Network Module Breakout Board

NETW5100
13,00 € 15,05 €
It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.
2
Out of stock
Outils de dev.

SIM900 GSM/GPRS Module

GSMSIM900
37,50 €
This GSM module is a breakout board and minimum system of SIM900 Quad-band GSM/GPRS module. It can communicate with controllers via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). This module support software power on, reset, data transfer and audio.
View
2
  • Prix réduit / -9,00 €
Available
Ethernet

Platine Ethernet W5100 pour Arduino...

ECRASW51001E
8,50 € 17,50 €
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The...
2
Available
Outils de dev.

DP83848 Ethernet Network PHY Breakout Board

NETDP83848
15,00 €
The DP83848 Ethernet Board is an accessory board includes an onboard Ethernet Physical Layer Transceiver DP83848, RJ45 connector, and control interface.
2
Out of stock
Outils de dev.

LoNet - Mini GSM/GPRS/GPS Breakout

GSMGPSLONET
60,00 €
LoNet is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation. It features ultra-low power consumption in sleep mode and integran. The module is controlled by AT command via UART and supports 3.3V and 5V logical level....
View
Available
Arduino

Wiznet ethernet shield (w5100) for Arduino...

SESARD124B2P
22,49 €
This is a Ethernet shield based on the Wiznet W5100 ethernet chip,compatible with Arduino Ethernet Shield, added support to Arduino Mega.
2
Available
Outils de dev.

SIM800L GSM/GPRS Module

WIRELESIM800L
20,00 €
This module power supply of 5V, computer debugging USB to TTL serial port. 800MA power supply output current , TTL serial port compatible with 3.3V and 5V MCU, the MCU can be connected directly. IPX antenna interface can switch PCB antenna, glue stick antenna and sucker antenna. SIM800L 4 frequency data communications, globally available.
  • Prix réduit / -1,00 €
Available
Connectivité sans fil

ESP-01S WiFi Serial Transceiver Module with...

SEDWIFSERTRNESP
4,00 € 5,00 €
This is the pin compatible upgrded version of the ESP-01 chip. ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.   ESP8266 has...
2
Available
Electronique

Grove - DMX512

CONGRODMX512
8,00 €
The Grove – DMX512 is a adapter from Grove interface to DMX512 interface(industry standard EIA-485 interface. The module is based on SN75176 chip which can balance transmission lines and meet ANSI Standard EIA-485 interface. Now It is convenience to control stage lighting and DMX512 console for Arduino.
2
Available
Electronique

RN-XV Wifly XBee (RN-171 XV, Wire antenna)

WIRRN171XV
35,00 €
RN-XV XBEE The RN-171-XV is a 802.11 b/g solution especially designed for designers who want to migrate their existing 802.15.4 architecture to a more standard TCP/IP-based platform without redesigning their existing hardware. Based on a pseudo standard footprint often found in embedded applications, the Roving Networks’ RN-171-XV module provides Wi-Fi...
2
  • Prix réduit / -25,60 €
Available
Réseau

Seeeduino Ethernet MEGA328P

ETHSEDARD
37,40 € 63,00 €
Seeeduino Ethernet is a compact and multifunctional development platform, which merges data logging and processing, device control and Ethernet communication together into one. It's armed with a MEGA328P chip and a Wiz5100: the former provides an Arduino controlling style and the latter provides TCP and UDP Ethernet communication ability.
2
Available
Accueil

Grove - Bee Socket

SEDGROBEESOCK
7,00 €
Grove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bluetooth Bee, etc. It is Arduino compatible and more effective to conduct peer-to-peer operations and mesh network runned by wireless modules. Regulator CJT1117 guareteens Xbee of stable 3.3 voltages. LEDs can reflect working modes...
Réseau
Product added to wishlist
Product added to compare.