TFT LCD

2
Available
Affichage

2.8" Serial TFT LCD Display (SPI, 240x320,...

LCDELE28ILI9341
19,90 €
This great little display boasting a 320x240 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
2
Out of stock
Affichage

Case for Raspberry Pi Official 7" Touchscreen

CASEOND7LCD
42,00 €
Our black case houses a 7 inch Raspberry Pi Touch Screen and an attached Raspberry Pi board (neither of which are included), to provide you with a protective and presentable LCD device.
View
2
Out of stock
Outils de dev.

ITDB02 Arduino Mega Shield (Arduino Compatible)

ASHITDB02MEG
11,00 €
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino Mega pins, for that reason, this Arduino MEGA shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
View
2
Available
Affichage

ITDB02 Arduino Shield (Arduino Compatible)

ASHITDB02
9,00 €
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino pins, for that reason, this Arduino shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
2
Out of stock
Arduino

2.4" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD24LCDTOUCH
24,17 €
The 2.4”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
View
Out of stock
ESP32

M5Stack Basic Kit (ESP32 dev module, Wifi,...

MCBM5STKIT
30,00 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
View
2
  • Prix réduit / -2,50 €
Available
Affichage

2.2" Serial TFT LCD Display (SPI, 176X220,...

LCDGEN22ILI9341
10,00 € 12,50 €
This great little display boasting a 176X220 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
2
Out of stock
Arduino

2.8" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD28LCDTOUCH
24,17 €
The 2.8”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
View
2
  • Prix réduit / -30,00 €
Out of stock
Outils de dev.

Raspberry Pi 5” LCD Display HDMI w/touch 800×480

LCDRPI5TCH
45,00 € 75,00 €
Very nice display compatible with Raspberry Pi 3 B, 2 B, 1 A+ and B+. It fits easily and has a very good response time thanks to its HDMI interface. This is the only one we've seen to boast this interface while still being a plug-in cape/shield. Setup time is quite fast, you just have to set the resolution in the config.txt of your raspberry pi and voilà...
View
2
Out of stock
Affichage

Raspberry Pi 7” TouchScreen Display (Official)(...

LCDRPI7OFF
75,00 €
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal co nversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
View
2
  • Prix réduit / -5,33 €
Out of stock
Outils de dev.

3.95" Raspberry Pi display (320x240, Compatible...

LCDRPI395
16,67 € 22,00 €
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
View
2
Available
Affichage

Raspberry Pi 7” TouchScreen Display ( HDMI LCD,...

LCDWSH7P1024600
70,00 €
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 1024 x 600 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
2
Available
Affichage

Raspberry Pi 3.5” TouchScreen Display ( IC LCD,...

LCDWSH35P320480
26,00 €
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
2
Out of stock
ESP32

M5Stack Fire Dev Kit (ESP32 dev module, 4mb...

MCBM5FDEVKIT
56,25 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not...
View
2
Out of stock
ESP32

M5Stack BALA (Kit robotique ESP32 à...

MCBM5FDEVBALA
103,75 €
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
View
2
Available
Home page products

M5STICKC IoT Arduino Basic Kit (ESP32-PICO Mini...

MCBM5STIKIT
20,83 €
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process. M5stickC is one of the core...
2
Available
TFT LCD

2.4" Serial TFT LCD 240X320 Display SPI...

LCDGEN24ILI9341
11,67 €
This great little display boasting a 240X320 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer. 2.4" Serial TFT LCD 240X320 Display SPI (ILI9341)(Raspi...
TFT LCD
Product added to wishlist
Product added to compare.