Motorized

 2
Available
Electronics

TowerPro SG-5010 Servo (Robotique)

SVOTPR00001
€12.00
TowerPro SG5010 is a high quality but really low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, even a dozen of hardware as shown.
 2
  • Reduced price / -€1.40
Available
Electronics

28BYJ-48 High quality Stepper motor 12V

MOTGENSTEP12V
€5.60 €7.00
Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc., Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95
 2
Available
Electronics

DC 12V 100RPM Mini Gear Motor 3mm JA12-N20

MOTGENGEARED6V70RPM
€5.75
Gear (reduction) motor of pretty good quality, running at 100rpm. All you need to do is connect the postive and negative pole-pin, simple enough for beginners.
 2
Available
Electronics

Freescale MMA7361L Accelerometer breakout...

iTeadStudio
SENITEMMA7361L
€9.00
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and...
Available
Electronics

Battery Holder - 4 x AA

ENEITEBOX4AA
€2.50
A prototype AA battery case, it has on/off switch on the case, and it can be fully closed by cap and further screw it to close, so it’s very well protected.
 2
Available
Electronics

EasyDriver allegro stepper motor driver

MDREASYDRIVER
€5.00
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and...
 2
Available
Electronics

ULN2003 Stepper Motor Driver Board

iTeadStudio
MDRULN2003
€4.58
ULN2003 Stepper Motor Driver Board is use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motors (5v-12v).
 2
  • Reduced price / -€6.00
Available
Motorized

Brushless Outrunner Motor A2212/13 1000 KV,...

MOTA221213
€9.00 €15.00
Brushless Outrunner Motor A2212/13 1000 KV, 47G, 12A Small size and light weight. 3mm hardened steel shaft, dual ball bearings. Includes collet type prop adapter and radial motor mount.
 2
Available
Electronics

GY-61 ADXL335 Accelerometer breakout module...

iTeadStudio
SENITEADXL335
€8.00
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
 2
  • Reduced price / -€1.40
Available
Electronics

28BYJ-48 High quality Stepper motor 5V

MOTITE28BYJ485V
€5.60 €7.00
Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc., Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95
Available
Electronics

A4988 stepper motor driver with heat sink...

MDRA4988
€6.25
The A4988 stepper motor driver carrier is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase...
Available
Electronics

10DOF IMU GY-88A (MPU6050, Barometer,...

SENIMUGY88
€20.83
Using sensors MPU6050, HMC5883L and BMP085, this 10 degrees of freedom IMU will add a whole new world of sensing to your new project.
  • Reduced price / -€5.17
Out of stock
Electronics

9 Axis Automatic integrated IMU GY-951...

SINIMUGY951
€19.83 €25.00
Using sensors ITG3205, ADXL345, HMC5883L and an integrated ATMEGA328P this 9 Axis integrated IMU will directly output yaw, roll and pitch information for your next robotic project !
 2
  • Reduced price / -€6.00
Available
Electronics

ADXL345 Accelerometer breakout module Triple-Axis

iTeadStudio
SENITEADXL345
€4.00 €10.00
The ADXL345 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale rangethe static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
 2
  • Reduced price / -€2.10
Out of stock
Electronics

NEMA 17 Stepper Motor 17HS4401

MOTSTE17PMK054
€16.23 €18.33
This Nema17 is a simple and low-cost bi-polar stepper motor, it is what you need for your Reprap, Makerbot and other 3D Printers or CNC or Laser or Plasma cutter kits.
 2
Available
Electronics

Battery Holder - 3 x AA

ENEBOX3AASWI
€2.08
A prototype AA battery case, , and it can be fully closed by cap and further
 2
Out of stock
Motorized

Motor Shield V2.0

Seeed Studio
ASHSESMOTV2
€16.30
The Motor Shield is a driver module for motors that allows you to use Arduino to control the working speed and direction of the motor. Based on the Dual Full-Bridge Drive Chip L298, it is able to drive two DC motors or a step motor. The Motor Shield can either be powered directly by Arduino or by an external 5V~15V power supply via the DC jack. This...
 2
Out of stock
Electronics

Hercules Dual 15A 6-20V Motor Controller (for...

MOTSESHERCULES
€48.33
Hercules Dual 15A 6-20V Motor Controller is a high current motor drive control board. including micro controller processor, motor drive circuit, charging circuit and protection circuit. It features a complete solution to power supply, control and drive. Compared with L298, its half bridge motor controller IR2104 and N-MOSFET take prominent advantage to...
 2
Out of stock
Dev. Tools

MotoMama - L298N H-Bridge Motor Driver Shield

MOTDRIITEMOTMAM
€12.50
MotoMama is a motor drivers shield for Arduino, based on L298N H-bridge driver chip. You can use this shield to drive two DC motors or an four-wire two-phase stepper motors with Arduino boards.
 2
Out of stock
Motorized

Stepper Motor 28H2P3205A4

SEDMOT28H2P3205A4
€13.00
It mainly used in mechanical motion control, Like CNC milling machine, laser cutter, 3D printer, it also can used in robot platform motion control.
 2
Available
Electronics

130 DC Motor

SEDMOT130DC
€3.17
This is Neodymium magnetic motor, High quality commutator and bigger brushs. With large output force and high speed, very suitable for making robot car.
 2
Out of stock
Electronics

Galvanometer motor (SC17-15K)

SEDGALVMOT
€66.67
Galvanometer motor is a lower cost stander parts used in laser equipment, easy to be used and assembled. it's offer a most cheap, convenient option when you want to controll the light beam.
Product added to wishlist
Product added to compare.