List of products by brand Seeed Studio

  • New
Available
Electronics

Grove - 200Cm Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED020MPIN4
€4.17
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 20cm cables for different applications.
 2
  • New
Available
Dev. Tools

113990634 - Module sans fil EMW5080V2 5 V WiFi...

Seeed Studio
WIFISEE5080
€5.42
EMW5080V2 is a cost-effective embedded Wi-Fi module released by MXCHIP with high integrating ARMCM4F, WLAN MAC/Baseband/RF. Maximum frequency 62.5MHz with 256KB SRAM and 2MB FLASH. Power supply is DC 5.0V. Peripherals: 1x Uart with connector.
 2
  • New
Available
Electronics

Grove - RJ45 Adapter

Seeed Studio
GROSEERJ45
€7.08
PRODUCT DETAILS The Grove-RJ45 Adapter is a module which can converter a standard Grove connector to a RJ45 connector. Universal 4-Pin Grove cables can not meet the requirements when Arduino remote connect and control Grove module. Through two RJ45 adapter and a cable , It is able to achieve communication between Arduino and Grove module. This solve the...
Available
Electronics

Grove - 300MM Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED03MPIN4
€0.83
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 30cm cables for different applications.
 2
Available
Shields

Grove Shield for Arduino Nano 33

Seeed Studio
BASSEDRONANO
€5.42
Grove Shield for Arduino Nano provides you a simple way to connect with Arduino Nano and also Seeeduino Nano.This shield help you get rid of breadboard and jumper wires by pulling out the pins of the motherboard and expands to 8 Grove connectors. V1.1 version supports the Arduino Nano 33 series development board.
 2
Available
Shields

Grove Shield for Pi Pico v1.0

Seeed Studio
BASSEDROPICO
€5.42
The Grove Shield for Pi Pico v1.0 is a plug-and-play shield for Raspberry Pi Pico which integrates with various kinds of Grove connectors, such as  I2C, UART, Digital, Analog ports. It enables the build prototype and project in an easy and quick way without solder and jumper wire , you could explore infinite possibilities of Pico.
Out of stock
Electronics

Grove - Câbles de capteur M5Stack, A034-D, pour...

Seeed Studio
GRVSED1MPIN5
€3.33
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 100cm cables for different applications.
 2
Available
Grove

Grove - LED Matrix Driver (HT16K33)

Seeed Studio
GROSEEMATRIX
€7.92
PRODUCT DETAILS LED Matrix is low cost and usually used to display simple numbers and images. The Grove - LED Matrix Driver is the I2C based product which allows you to control the LED matrix with our prepared and easy-to-use libraries, or you can create your own library to control it to satisfy your need. The 8*8 LED Matrix can be assembled and...
 2
Available
Grove

Grove - Multi Color Flash LED (5mm)

Seeed Studio
GROLED4C
€2.92
PRODUCT DETAILS A general purpose LED module in Grove form factor, available in different colors. The ingenious PCB design enables you to bend the LED to any position you want, which makes it easy to use it standalone, horizontal or Panel Mount(from left to right in below pics)
 2
Available
Grove

Grove - 16-Channel PWM Driver (PCA9685)

Seeed Studio
GROPWM16C
€11.25
Grove – 16-Channel PWM Driver (PCA9685) is a 12-bit PWM driver based on the NXP PCA9685 and can drive up to 16 servos with an external power supply of 5V. 
Available
Electronics

Grove - Universal 4 Pin connector 90°

Seeed Studio
GRVSED4PIN90
€0.50
The Universal 4 Pin connector is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping.
 2
Out of stock
Dev. Tools

Arduino Sensor Kit - sensor kit for Arduino UNO

Seeed Studio
SENSESFGROBKIT
€29.17
The Arduino Sensor Kit is a joint electronics starter kit from Seeed and Arduino. It integrates 10 commonly used electronics modules on one PCB, so no breadboard, no soldering, and even no wiring are required. The Arduino content team has also prepared a step-by-step tutorial for this kit. All these features make it an ideal Arduino starter kit for Steam...
 2
Available
Dev. Tools

Beginner kit Grove compatible Arduino® (Seeeduino)

Seeed Studio
SENSESGROBKIT
€24.58
Ce starter-kit évolutif basé sur un module Seeeduino Lotus (compatible Arduin®o Uno) associé à 10 modules Grove déjà pré-raccordés sur un même PCB sera très apprécié par les écoles.
 2
Available
Display

Grove - OLED Display 0.96" 128×64 SSD1315

Seeed Studio
OLEDSEDDISP96
€8.25
oled 128×64 dot resolution High brightness,self-emission and high contrast ratio Big screen on a compact design Low power consumption Grove compatible 4pin I2C connector
 2
  • Reduced price / -€6.00
Available
Dev. Tools

EMW3165 - Cortex-M4 based WiFi SoC ModuleFI,...

Seeed Studio
MCBWIFI3165
€9.00 €15.00
Description EMW3165 is a low-power embedded Wi-Fi module integrates a wireless LAN MAC/baseband /radio, and a Cortex-M4 microcontroller 
Available
Electronic basics

Grove - Relay (3v dc / 250V at 10 amps.)

Seeed Studio
GROVSEEREL
€5.42
The Relay is a digital normally open switch that controls a relay capable of switching 3V DC  3v dc / 250V at 10 amps.
Available
Power and Energy

1W Solar Panel 110X60-6

Seeed Studio
ENESES1W
€6.25
Need a clean energy source for your project? Check out this compact, high quality, high output endurable solar panel. This solar panel mates directly with many of our development boards and has a high efficiency. Unit has a clear epoxy coating with hard-board backing, provides an efficient and waterproof surface for the panel application on out-door...
 2
  • Reduced price / -€3.25
Out of stock
Dev. Tools

BeagleBone Green (Seeed Studio version)

Seeed Studio
LINSEDBBGRN
€46.75 €50.00
SeeedStudio BeagleBone Green (BBG) is a joint effort by BeagleBoard.org and Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and developed into this differentiated version. The BBG has included two Grove connectors, making it easier to connect to the large family of Grove sensors. It has also updated the 5V barrel to micro...
Out of stock
Electronics

Grove - Universal 4 Pin Buckled 5cm (Cable)

Seeed Studio
GRVSED4PIN5
€0.67
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm cables for different applications.
 2
Available
Relays

Raspberry Pi 4 Relay Shield

Seeed Studio
SLDEDRRASPPI
€27.50
Only need five pins of Raspberry Pi (RPI) to control it, 5V, 3V3, GND, SDA and SCL.
 2
  • Reduced price / -€7.40
Available
Display

Small e-paper Shield for Arduino

Seeed Studio
EPAPSEDS
€19.60 €27.00
e-paper might be the most comfortable material to read. It reflects light instead of emits light to mimic the experience of conventional paper reading. And in this way much less power is consumed.
 2
Out of stock
Electronics

EL wire 2xAA pocket inverter

Seeed Studio
ENESEDEL2AA
€6.25
This is a small portable EL wire inverter. Powered by 2 AA batteries (not included). It can drive 1 to 5 meter of our high-brightness EL wire approximately 10 hours. There is a button for selecting steady/slow blink/fast blink/on/off modes. There's a removable cover on the back. Comes with a 2.5mm pitch female JST connector. To connect an EL wire to...
 2
Out of stock
Electronics

Mini 125Khz RFID Module - Pre-Soldered Antenna...

Seeed Studio
WIRSEDRFIDMIN70MM
€10.00
This RFID module is designed for reading code from 125Khz card compatible read-only tags and read/write card. It will notify whenever 125Khz tag approaches, the tag serial number will be send via TX pin or Wiegand pin. Super small size design, it is widely applied in office/home security, personal identification, access control, anti-forgery, interactive...
 2
Available
Electronics

IR Distance sensor 80 cm Analogique grove

Seeed Studio
SENGROPROX
€14.00
The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensors, this sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). Can be used in TVs,personal computers ,cars and so on.
 2
Out of stock
Arduino

Grove - Mega Shield

Seeed Studio
SEDGROMEGASHI
€10.00
Mega Shield is a extension board for Arduino Mega, DUE and Google ADK.
Available
Power and Energy

0.5W Solar Panel 65X74

Seeed Studio
ENESES05W
€3.00
Need a clean energy source for your project? Check out this compact, high quality, high output endurable solar panel. This solar panel mates directly with many of our development boards and has a high efficiency. Unit has a clear epoxy coating with hard-board backing, provides an efficient and waterproof surface for the panel application on out-door...
 2
Available
Power and Energy

2W Solar Panel 110x136

Seeed Studio
ENESES2W
€10.00
solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which makes it perfect to team up with most of our can-use-solar-power-supply boards, like Seeeduino microcontroller...
 2
Available
Electronics

male female splittable jumper wires (100mm, 40...

Seeed Studio
CONSEDJMP40PMF10
€3.33
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Electronics

Dual female splittable jumper wires (100mm, 40...

Seeed Studio
CONSEDJMP40PFF10
€3.33
This is a splittable 40 pin dual female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Electronics

Dual male splittable jumper wires (300mm, 40...

Seeed Studio
CONSEDJMP40PMM
€5.00
This is a splittable 40 pin dual male jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Out of stock
Electronics

male female splittable jumper wires (300mm, 40...

Seeed Studio
CONSEDJMP40PMF
€5.00
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Dev. Tools

MicroSD Card Adapter for Raspberry Pi

Seeed Studio
MICSDADARPI
€4.17
This MicroSD card adapter makes your pi more slimmer. It’s easily to slide in to the Raspberry Pi, and just is half length than normal SD card. Also, you can lock and unlock MicroSD card without pop the adapter.
 2
  • Reduced price / -€2.90
Available
Electronics

Energy Shield

Seeed Studio
ASHSESENESH
€18.00 €20.90
Energy Shield is a LiPo battery based power shield that keeps your project alive. It keeps its battery charged whenever an available power source exists. It accepts a wide range of power sources, from common solar cells via JST connector and USB via USB port on microcontroller, to 9V and 12V DC adapters via DC Jack on your Arduino. Meanwhile it can not...
Available
Dev. Tools

AVR USB Programmer

Seeed Studio
PRGSEDAVRUSB
€24.00
This is a cheap usb programmer for the AVR chips (like the Arduino ones).
 2
Available
Electronics

Dual female splittable jumper wires (300mm, 40...

Seeed Studio
CONSEDJMP40PFF
€5.00
This is a splittable 40 pin dual female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Dev. Tools

Base Shield V2

Seeed Studio
ASHSESBASE
€8.00
As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.
 2
Available
Sensors

Electronic Brick - Grove - Gas Sensor MQ2

Seeed Studio
SENSESSEN90512P
€7.50
Gas Sensor(MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurement can be taken as soon as possible. The sensitivity of the sensor can be adjusted by potentiometer.
 2
Available
Grove

Grove - Gas Sensor MQ5

Seeed Studio
SENSESSEN90502P
€9.58
The Grove - Gas Sensor(MQ5) module is useful for gas leakage detecting(in home and industry). It can detect LPG, natural gas, town gas and so on. Based on its fast response time. measurements can be taken as soon as possible. Also the sensitivity can be adjusted by the potentiometer.
 2
  • Reduced price / -€10.00
Available
Display

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
€30.00 €40.00
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
Available
Electronics

5mW Laser Module emitter - Red Point IIIa

Seeed Studio
LASSESR5MWPO
€6.58
Module laser rouge de classe IIIa affichant un point rouge. Au-delà de 3 mètres, la luminosité du point rouge diminue. Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW Working current: Min 10mA, Typical 20mA, Max 25mA Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC Wavelength: 650nm Working Temperature: Min -15C, Typical 25C, Max 35C Storage...
 2
Available
Arduino

Protoshield Kit Remixed for Arduino (Arduino...

Seeed Studio
ASHSESARDPROTOSHIELD
€9.92
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom...
 2
Available
Electronics

Ultrasonic Ranging Module HC-SR04

Seeed Studio
SENITEUSRHCSR04
€2.92
If you are searching an ultrasonic ranging module, the HC-SR04 is good choice: Its stable performance and high ranging accuracy make it a popular module in electronic market. It's cheaper than an IR range finder with similar range accurancy and distance.
 2
Available
Display

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
€3.50
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
Product added to wishlist
Product added to compare.