List of products by brand Seeed Studio

 2
  • Prix réduit / -2,44 €
Available
Arduino

Bees Shield

Seeed Studio
SESINT119B2P
6,67 € 9,11 €
Bees shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and etc) easier than ever before. Aside from dual Bee style 20p 2.0 pitch socket, it also has large proto area, customizable software, serial, port for easier prototyping.
 2
  • Prix réduit / -10,00 €
Available
Outils de dev.

Danger Shield Complete kit

Seeed Studio
ASHDANGER
15,00 € 25,00 €
The Danger Shield is an add-on for the Arduino. It contains a variety of fun and useful electronic circuits that you can use to do fun and useful things. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No extra things to hook up, no external components. Just a really rad board ready to rock.
Out of stock
Electronique

Panneau solaire 1.5W 81X137

Seeed Studio
ENESES15W
8,28 €
C'est un panneau solaire fait spécialement pour s'adapter aux platines de développement open source et garde un taux d'efficacité elevé (16%). L'unité a une protection epoxy avec une carte solide comme support. Cet alliance permet une robustesse à l'épreuve des éléments (usage extérieur) !
Out of stock
Electronique

Panneau solaire 2.5W 116*160

Seeed Studio
ENESES25W
11,70 €
C'est un panneau solaire fait spécialement pour s'adapter aux platines de développement open source et garde un taux d'efficacité elevé (15%). L'unité a une protection epoxy avec une carte solide comme support. Cet alliance permet une robustesse à l'épreuve des éléments (usage extérieur) !
Available
Puissance et Energie

Panneau solaire 3W 145*145 (solar)

Seeed Studio
ENESES3W
14,30 €
C'est un panneau solaire fait spécialement pour s'adapter aux platines de développement open source et garde un taux d'efficacité elevé (16%). L'unité a une protection epoxy avec une carte solide comme support. Cet alliance permet une robustesse à l'épreuve des éléments (usage extérieur) !
 2
Available
Electronique

Ultrasonic Ranging Module HC-SR04

Seeed Studio
SENITEUSRHCSR04
2,92 €
If you are searching an ultrasonic ranging module, the HC-SR04 is good choice: Its stable performance and high ranging accuracy make it a popular module in electronic market. It's cheaper than an IR range finder with similar range accurancy and distance.
  • Prix réduit / -1,08 €
Available
Electronique

Aluminium Case For Small Projects - 111*67*16 (Mm)

Seeed Studio
CASSESALUSMA
5,42 € 6,50 €
Aluminum with oxidized surface, Silver steel color. Perfect for small arduino, launchpad or stm32 discovery based projects (without shields but with spare size for sensors).
 2
Available
Electronique

Aluminium Case For Small Projects - 100*69*28 (Mm)

Seeed Studio
CASSESALUMED
7,50 €
Aluminum with oxidized surface, Silver steel color. Perfect for small arduino, launchpad or stm32 discovery based projects (with one shield and spare size for sensors).
Out of stock
Prototypage

Seeeduino Mega Protoshield Kit

Seeed Studio
ASHSESSEDMEGAPROTOKIT
9,92 €
This is the 1st Protoshield for Seeeduino MEGA which brought all pins from Seeeduino, even Arduino to the top! With this protoshield, users will find a large prototyping area, you can even use Xbee with this board to make it a Xbee shield. 
 2
Available
Arduino

Protoshield Kit Remixed for Arduino (Arduino...

Seeed Studio
ASHSESARDPROTOSHIELD
9,92 €
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom...
 2
Out of stock
Outils de dev.

DSO Nano V3 (handheld digital storage...

Seeed Studio
MESSESDSONANOV3
78,00 €
DSO Nano v3 is a 32bit digital storage oscilloscope. Based on ARM -M3, it’s equipped with 320*240 color display, SD card, USB port and recharging function. It’s compact, simple to operate; meets the basic demands of school lab, electric furniture repairmen and electric engineering. The version 3 of DSO Nano differs from version 2 in that it does not use...
 2
Available
Affichage

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
3,50 €
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
 2
Available
Electronique

5mW Laser Module emitter - Red Point IIIa

Seeed Studio
LASSESR5MWPO
5,42 €
Module laser rouge de classe IIIa affichant un point rouge. Au-delà de 3 mètres, la luminosité du point rouge diminue. Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW Working current: Min 10mA, Typical 20mA, Max 25mA Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC Wavelength: 650nm Working Temperature: Min -15C, Typical 25C, Max 35C Storage...
 2
Product available with different options
Prototypage

Seeeduino Stalker - Waterproof Solar Kit

Seeed Studio
MCBSEDSTALWPRO
Seeeduino Stalker - Waterproof Solar Kit is based on the Seeeduino Stalker v2.3 which is a feature rich Arduino compatible Wireless Sensor Network node and it's modular structure and onboard peripherals makes it convenient to log and time stamp sensor data on a periodic basis. The Seeeduino Stalker is a candidate for all your tracking, monitoring and...
 2
  • Prix réduit / -3,25 €
Out of stock
Outils de dev.

BeagleBone Green (Seeed Studio version)

Seeed Studio
LINSEDBBGRN
46,75 € 50,00 €
SeeedStudio BeagleBone Green (BBG) is a joint effort by BeagleBoard.org and Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and developed into this differentiated version. The BBG has included two Grove connectors, making it easier to connect to the large family of Grove sensors. It has also updated the 5V barrel to micro...
Available
Accueil

AVR USB Programmer

Seeed Studio
PRGSEDAVRUSB
24,00 €
This is a cheap usb programmer for the AVR chips (like the Arduino ones).
 2
  • Prix réduit / -10,00 €
Available
Affichage

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
30,00 € 40,00 €
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
Available
Electronique

Dual female splittable jumper wires (300mm, 40...

Seeed Studio
CONSEDJMP40PFF
5,00 €
This is a splittable 40 pin dual female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Electronique

EL Wire Green 3m

Seeed Studio
ELWSED3GRE
11,67 €
This is a 3 meter long roll, with high-brightness and long-life EL wire. The brightest and best looking EL color we could find for you. You need an inverter to drive the EL light.   Please note! EL tape, EL wire and EL panel are made with different processes - the color and brightness will not be consistent between the different types of EL products.
 2
Available
Electronique

EL wire red 3m

Seeed Studio
ELWSED3RED
11,67 €
This is a 3 meter long roll, with high-brightness and long-life EL wire. The brightest and best looking EL color we could find for you. You need an inverter to drive the EL light.   Please note! EL tape, EL wire and EL panel are made with different processes - the color and brightness will not be consistent between the different types of EL products.
 2
  • Prix réduit / -2,90 €
Available
Electronique

Energy Shield

Seeed Studio
ASHSESENESH
18,00 € 20,90 €
Energy Shield is a LiPo battery based power shield that keeps your project alive. It keeps its battery charged whenever an available power source exists. It accepts a wide range of power sources, from common solar cells via JST connector and USB via USB port on microcontroller, to 9V and 12V DC adapters via DC Jack on your Arduino. Meanwhile it can not...
 2
Available
Accueil

MicroSD Card Adapter for Raspberry Pi

Seeed Studio
MICSDADARPI
4,17 €
This MicroSD card adapter makes your pi more slimmer. It’s easily to slide in to the Raspberry Pi, and just is half length than normal SD card. Also, you can lock and unlock MicroSD card without pop the adapter.
 2
Out of stock
Electronique

Mini 125Khz RFID Module - Pre-Soldered Antenna...

Seeed Studio
WIRSEDRFIDMIN35MM
10,00 €
This RFID module is designed for reading code from 125Khz card compatible read-only tags and read/write card. It will notify whenever 125Khz tag approaches, the tag serial number will be send via TX pin or Wiegand pin. Super small size design, it is widely applied in office/home security, personal identification, access control, anti-forgery, interactive...
 2
Out of stock
Outils de dev.

Micro SD Card Adapter for Raspberry & Macbooks...

Seeed Studio
MICSDADARPIMBKBLK
4,17 €
This is a Micro SD Card to SD Card adapter, supports maximum capacity of 64GB TF card, shorter than the normal SD Card. Compatible with Raspberry Pi and the Mac Books, and three colors are available, black, blue and green.
 2
Available
Electronique

Dual male splittable jumper wires (300mm, 40...

Seeed Studio
CONSEDJMP40PMM
5,00 €
This is a splittable 40 pin dual male jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Electronique

Dual female splittable jumper wires (100mm, 40...

Seeed Studio
CONSEDJMP40PFF10
3,33 €
This is a splittable 40 pin dual female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Out of stock
Motorisé

Shield Moteur pour Arduino v2.0 (L298, 5-15V)

Seeed Studio
ASHSESMOTV2
16,30 €
The Motor Shield is a driver module for motors that allows you to use Arduino to control the working speed and direction of the motor. Based on the Dual Full-Bridge Drive Chip L298, it is able to drive two DC motors or a step motor. The Motor Shield can either be powered directly by Arduino or by an external 5V~15V power supply via the DC jack. This...
 2
Out of stock
Electronique

male female splittable jumper wires (300mm, 40...

Seeed Studio
CONSEDJMP40PMF
5,00 €
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Electronique

male female splittable jumper wires (100mm, 40...

Seeed Studio
CONSEDJMP40PMF10
3,33 €
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
 2
Available
Electronique

2W Solar Panel 110x136

Seeed Studio
ENESES2W
10,00 €
This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which makes it perfect to team up with most of our can-use-solar-power-supply boards, like Seeeduino...
Product added to wishlist
Product added to compare.