- Out-of-Stock
ESP32 PSRAM Timer Camera X (OV3660) M5STACK
€25.00
Tax included
Timer Camera X is a camera module based on ESP32, integrating an ESP32 chip and 8M-PSRAM. The OV3660 camera sensor features 3 million pixels, a DFOV of 66.5°, and captures photos at 2048x1536 resolution. It includes a built-in 140mAh battery and an LED status indicator, designed for ultra-low power consumption. A reset button is located under the LED. Using the RTC (BM8563), timed sleep and wake-up cycles are supported. The standby current is only 2μA. With the timed photo capture function enabled (one photo per hour), the battery can operate continuously for over a month. The module supports Wi-Fi image transmission and USB debugging. The bottom HY2.0-4P port allows connection to other peripherals. Firmware can be flashed using M5Burner.
Product Features
- Design based on ESP32
- Wi-Fi image transmission
- Timed sleep and wake-up
- Status indicator
- Ultra-low power design
- Built-in 140mAh battery
- Programming platforms: ESP-IDF/Arduino/UIFlow
Includes
- 1x Timer Camera X
- 1x LEGO Adapter
- 1x Wall-1515
- 1x Type-C USB cable (20cm)
Applications
- Regular photo capture
- Remote video monitoring
Specifications
| Resources | Parameter |
|---|---|
| PSRAM | 8MB |
| Flash | 4MB |
| Image Sensor | OV3660 |
| Maximum resolution | 3M pixels |
| Output format | 8-/10-Bit RAW, RGB, YCbCr output, compression. |
| DFOV | 66.5° |
| Battery | 140mAh |
| Net weight | 15g |
| Gross weight | 39g |
| Product Size | 48*24*15mm |
| Package Size | 75*45*30mm |
LEARN AND DOCUMENTS
SENM5SCAMOV3660X
New
You might also like
Timer Camera X is a camera module based on ESP32, integrating an ESP32 chip and 8M-PSRAM. The OV3660 camera sensor features 3 million pixels, a DFOV of 66.5°, and captures photos at 2048x1536 resolution. It includes a built-in 140mAh battery and an LED status indicator, designed for ultra-low power consumption. A reset button is located under the LED. Using the RTC (BM8563), timed sleep and wake-up cycles are supported. The standby current is only 2μA. With the timed photo capture function enabled (one photo per hour), the battery can operate continuously for over a month. The module supports Wi-Fi image transmission and USB debugging. The bottom HY2.0-4P port allows connection to other peripherals. Firmware can be flashed using M5Burner.