G1/2 Electric Solenoid Valve (Normally Closed)

Reference SEDELECVALVE

Out-of-Stock

€8.33

This is a normally closed G1/2 12VDC electric solenoid valves with barbed inlet and outlet ports, great for projects involving low viscosity fluid control. You can find it ubiquitous on applications like automatic faucets, foot operated faucets, drinking fountains etc.

Features

Normally closed
Durable
Stainless steel inlet filter
Wide operation temperature range

Specifications

Working voltage: 12VDC
Max current: 450mA
Rated power:5W
Operating mode: normally closed
Inlet/Outlet ports: G1/2”
Materials: nylon/ stainless steel/Polyoxymethylene
Vale type: diaphragm valve (operated by servo)
Filter screen: stainless steel inlet filter
Insulation: insulation resistance between conductors and non-conductor is greater than 100MΩ
Insulation class: E class insulation
Pressure: This is the micro-pressure valve (with pressure), issuitable for 0.02-0.8MPA pressure
Fluid: (0-100 ° C) water
Water flow characteristics (with pressure-type): 0.02Mpa> 1.5L / min; 0.10Mpa> 7L / min; 0.30Mpa> 12L / min; 0.80Mpa> 20L / min
Life: ≥50 thousand times (laboratory data) ≥30 million times (actually normal use)

Condition New product

No reviews

Customers who bought this product also bought:

Available

Home

JST 2.0mm connector (5pcs pack, angled 90°)

CONJST2MMANG

€0.83

Available

Electronics

5mW Laser Module emitter - Red Point

LASSESR5MWPO

€5.21

Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW Working current: Min 10mA, Typical 20mA, Max 25mA Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC Wavelength: 650nm Working Temperature: Min -15C, Typical 25C, Max 35C Storage Temperature: Min -20C, Max +25C Focused Dot width: <2mm spoting 3 meters away.

Reduced price / -€4.00

Available

Sensors

DSM501A dust sensor

SENDUSDSM501A

€14.00 €18.00

The dust sensor module DSM501A is low cost,compact size for a particle density sensor.

Reduced price / -€2.34

Available

Dev. Tools

Relay Shield

ASHSESRELY

€11.33 €13.67

The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by Arduino’s Digital I/Os. Standardized shield form factor enables smoothly connection with the Arduino. The shield also has...

Available

Home

Reed Switch

ECRSPM02102S

€0.63

The reed switch is an electrical switch operated by an applied magnetic field. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch. It consists of a pair of...

Reduced price / -€4.00

Available

Electronics

SDS011 Nova μg/m3 Particles Sensor (PM2.5 and...

SENNOVSDS011

€36.00 €40.00

With its size, it is probably one of the best sensor in terms of accuracy, especially considering it has an output in μg/m3 directly. There is an USB Uart converter included if you want to use it on a raspberry pi or on a computer, but you can always use the digital or uart output directly.

Available

Electronics

G1/4 Electric Solenoid Valve 2W MAX 10kg/cm²...

ELEFLYVALVE14

€12.42

This is a normally closed G1/4 12VDC electric solenoid valves with barbed inlet and outlet ports, great for projects involving low viscosity fluid control. You can find it ubiquitous on applications like automatic faucets, foot operated faucets, drinking fountains etc.