Your cartThere are no more items in your cart
DC framework Solenoid Electromagnet (Push/Pull open-frame, 5V-6V 0.3A)
2.5mm Pull - Push Type Open Frame Solenoid Electromagnet DC 5V-6V 0.3A
|Type||Cadre ouvert (pousser)|
|Tension - Nominale||5V CC|
|Longueur de course||0,177 po (4,50mm)|
|Résistance en courant continu (DCR)||4,5Ohms|
|Filetage de la douille||-|
|Type de montage||Montage sur châssis|
|Style de terminaison||Fil conducteur avec connecteur|
|Taille /dimension||0,787po L x 0,433po l x 0,572po H (20,00mm x 11,00mm x 12,00mm)|
|Diamètre - Arbre||0,157po (4,00mm)|
|Détail de l'arbre||Rond|
Customers who bought this product also bought:
High power mosfet to switch all your devices/leds/motors easily. This is the N-type, meaning you have to put it between the load and the ground.
Mega 2560 R3 (Arduino Compatible)
5 cm (2") 3W 8 Ohm miniature speaker with a plastic basket and plastic diaphragm. Broad frequency response and good voice reproduction. Particularly well suited to outdoor applications and where ambient conditions are generally unfavourable (e.g. high humidity).
Basic and sturdy 3rd hand to help you on all your prototyping needs. 3rd hand PCB holder (60mm Equipment: magnifying glass)
Put on your sunglasses before using this matrix with 64 eye-blistering RGB LEDs adorn the panel for a blast of configurable color. Arranged in a 8x8 matrix, each pixel is individually addressable. Only one pin is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization.
A single pack of 100 resistors of the same value, useful for big projects or for very common resistor values.
Nice cable with a smaller section, ideal for a lot of electronic board to board wiring.
Electronic brick of microphone can be connected to the analog I / O port, when speaking to the microphone, the analog value will be changed. A recorder can be made by reading and saving the analog value.
This is a SD / MicroSD card breakout board, and it will allow you to breakout the SD/MMC socket to a standard 0.1" x 6-pin header. It can work with 5V or 3.3V power supply, and both 5V/3.3V IO operation level. It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.