USB GPS & Glonass adapter (Vk-172, Gmouse, Ublox 7, Linux/Win/OSX/ARM)

USBGPSVK172
€15.83
Simple and powerful USB GPS & Glonass adapter with fast fix and high sensitivity. Compatible with most operating systems and machines (including Raspberry Pi, CubieBoard, NUC, linux and windows)

HackSpark
  1. All our products are shipped from France.
  2. A doubt about a purchase ? Return your items and get money back.
  3. We carefully choose and test the products we sell.

VK-172 automatically adapt the baud rate, the baud rate has any data output
Support Google Earth

C / A code, 1.023MHz stream
Receive Band: L1 [1575.42MHz]

Tracking Channels: 56
Support DGPS [WAAS, EGNOS and MSAS]
Positioning performance :
2D plane: 5m [average]
2D plane: 3.5m [average], has DGPS auxiliary.
Drift: <0.02m / s
Timing Accuracy: 1us
Reference coordinate system: WGS-84
Maximum altitude: 18,000 m
Maximum speed: 500m / s
Acceleration: <4g
Electrical properties:
Tracking sensitivity:-162dBm
Acquisition sensitivity:-160dBm
Cold Start Time: 29s [average]
Warm start time: 28s [average]
Hot start time: 1s [average]
Recapture Time: 0.1s [average]
Operating temperature:
-30 ℃ to +80 ℃

Watts (sortie)
Micro-controlleur(s)
Prix d'achat
Color
Google Product Type
Vitesse d'horloge
Couleurs d'affichage
Type de CPU
Mémoire Flash (programme)
Voltage
5v
Colonne de rangement
Watts (entrée)
Famille de micro-controlleur
Adresse de la page produit fabricant
Courant
Connectivité
USB Device
Coeurs CPU
Display Type
Fréquence Radio
Tension en entrée
Résolution d'affichage
Zone de stockage
Mémoire RAM (vive)
Compatibilité avec les cartes
Etage de rangement
7 Items
New product
No reviews

Customers who bought this product also bought:

2
  • Reduced price / -€2.00
Available
Sensors

DHT-22 Temperature & Humidity Sensor

SENDHT22
€6.25 €8.25
The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.
Available
Electronics

Male Male Deluxe (reinforced) Breadboard jumper...

CON00002
€5.75
Whenever you want to use a breadboard for prototyping you need wires and preparing wires is long. Those wires are already prepared and come in four different sizes in the pack. Unlike other wires you can find on the web, those are reinforced, with a molded barrel and a real connector. No more open circuits or bad connections in your circuits with those...
2
  • Reduced price / -€6.00
Available
Raspberry Pi

Raspberry Pi 3 B+ Model (BCM2837B0, Cortex...

LINRPI3B+
€37.33 €43.33
Raspberry Pi 3 Model B+ 1GB RAM The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi3 range, boasting a 64-Bit quad core processor running at 1.4GHz, dual band 2.4GHz / 5.0GHz wireless, Bluetooth 4.2/BLE, faster Ethernet and PoE capability via a separate PoE HAT. The dual band wireless comes with modular compliance certification...
2
Available
Tools

45 in 1 Professional Portable Opening Precision...

TOOLSETJK
€16.67
This 45 in1 Precision multi-non-slip tough shaft ensures greater comfort and convenience. This screwdriver kit set is an ideal tool for repairing electronic workshops, watch, eyeglass, and hobby miniatures where fine precision is required.
2
Available
Dev. Tools

Raspberry Pi 5 MP Wide Angle Camera with Night...

SENRPIIRLED
€20.83
Raspberry Pi 5 MP Wide Angle Camera with Night Vision sensor IR  On board photoresistor, on board adjustable resistor; Operation: connect LED board and PCB board of camera w/ screw, adjust resistor of LED board (IR light auto work when it is dark and auto off if it is bright)
2
Available
Home

125Khz RFID module RDM6300 - UART

WIRITERFIDRDM6300
€10.00
RDM6300 125KHz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.
2
Available
LEDs & Lights

I2C LCD Adapter module for 1602 2004 LCD...

ADPJANIICI2C
€4.17
This is an I2C adapter module, with a backlit LCD display used in 160,220,048. Used for Arduino robot board, to use I2C I / O board interface savings, convenient and simple.
2
Available
Electronics

male female splittable jumper wires (200mm, 40...

CONSEDMFP40P20
€4.17
This is a splittable 40 pin jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
Product added to wishlist
Product added to compare.