Flow switch (MR-W1-P)

SWISESMRW1P
€15.00
This sensor works as a switch, lets the current flow while water passes though.

You might also like

HackSpark
  1. All our products are shipped from France.
  2. A doubt about a purchase ? Return your items and get money back.
  3. We carefully choose and test the products we sell.

Specification

  • Max switch current: 0.5 A
  • Max load current : 1.0 A
  • Max resistance: 100 ohm
  • Max load power: 10 w
  • Max switch voltage: 100 vdc
  • Min damage voltage: 220 vdc
  • Min sensible flow: ≥0.1L/MIN
  • Working flow range: 1-30L/MIN
  • Min sensible pressure: ≥0.1 mpa
  • Min water pressure: 0. 1 mpa
  • Max water pressure: 1.2 mpa
  • Working temperature: 1-80°C
  • Storage temperature: -20-10°C
  • Life: 108 times
  • Response time : 0.2 sec
  • Release time : 0.2 sec
Résolution d'affichage
Zone de stockage
Mémoire RAM (vive)
Etage de rangement
Compatibilité avec les cartes
Watts (sortie)
Adresse de la page produit fabricant
Micro-controlleur(s)
Color
Google Product Type
Coeurs CPU
Vitesse d'horloge
Couleurs d'affichage
Type de CPU
Mémoire Flash (programme)
Colonne de rangement
Voltage
Watts (entrée)
Code Fabricant
Famille de micro-controlleur
Courant
Prix d'achat
Connectivité
Display Type
Fréquence Radio
Tension en entrée
6 Items
New product
No reviews

Customers who bought this product also bought:

2
Available
Electronics

PIR Motion Sensor Module

SENITEPIR
€6.00
Highly integrated module popularly used for entry detection, it complies with microcontroller or DC loads.
2
Out of stock
Electronics

Deluxe (reinforced) Breadboard jumper wires...

CON00002
€5.75
Whenever you want to use a breadboard for prototyping you need wires and preparing wires is long. Those wires are already prepared and come in four different sizes in the pack. Unlike other wires you can find on the web, those are reinforced, with a molded barrel and a real connector. No more open circuits or bad connections in your circuits with those...
View
  • Reduced price / -€1.00
Available
Electronics

DS18B20+

ELCDS18B20
€3.00 €4.00
The DS18B20+ is a programmable resolution 1-wire digital thermometer in 3 pin TO-92 package. This digital thermometer provides 9bit to 12bit celsius temperature measurements and has an alarm function with non-volatile user programmable upper and lower trigger points. The DS18B20 communicates over a 1-wire bus that by definition requires only one data line...
Available
Electronics

5mm Yellow Led

LEDKIN5MMYEL
€0.10
Simple 5mm yellow led with 20mcd power.
  • Reduced price / -€1.00
Available
Wireless Connectivity

ESP-01S WiFi Serial Transceiver Module with...

SEDWIFSERTRNESP
€4.00 €5.00
This is the pin compatible upgrded version of the ESP-01 chip. ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.   ESP8266 has...
Available
Electronics

Digital DS18B20 temperature sensor with steel...

SENDS18B20METAL
€6.00
This is a digital temperature sensor, that is already calibrated. The measurement is done where the sensor is, no need for long insulated wire or complicated ADC design. This sensor is therefore also perfect for use with a Raspberry Pi, as it is not analogic, all the data is transmitted in digital One Wire protocol.
  • Reduced price / -€0.80
Available
Electronics

LDR Photo-resistor

SENRSLDR
€0.70 €1.50
Basic photo-resistor.
Out of stock
Electronics

Grove – Temp & Humi Sensor

SENSESGROTMPHM
€7.00
This temperature & humidity sensor provides a pre-calibrated digital output. A unique capacitive sensor element measures relative humidity and the temperature is measured by a negative temperature coefficient (NTC) thermistor. It has excellent reliability and long term stability. Please note that this sensor will not work for temperatures below 0 degree.
View
Product added to wishlist
Product added to compare.