3.7V 2900mAh Li-Ion 18650 Battery (3.2V-4.2V, Panasonic, NCR18650PF, LiNiCOMnO2 chemistry)
Nice little battery that is really inexpensive for the (quite high) power it provides. Be sure to use it with a proper holder.
- Capacity Std.
- charge / discharge Nominal 2,900mAh (C nom )
- Minimum 2,750mAh (C min )
- Nominal Voltage
- Average 3.7V
- Standard Charge
- Constant current 1925mA
- Constant voltage 4.2V
- End current(Cut off) 50mA
- Max. Charge Current
- Max. Discharge Current for continuous discharge 2C / 6A (peak 10A)
- Weight Approx. Max. 46.5g
- Operating Temperature
- Charge 0 ~ 45°C
- Discharge -20 ~ 60°C
- Storage -20 ~ 50°C
- Energy density
- Volumetric: 577 Wh/l
- Gravimetric: 214 Wh/kg
Customers who bought this product also bought:
Easy to use Darlington Transistor Array for all your projects.
The RTC module is specifically designed for Raspberry Pi. It communicated with Raspberry Pi through I2C bus. There is a Maxim DS1307 and CR1220 button cell on the board to keep the real time for a long time after the Raspberry Pi has its power down. Set a serial port, TTL convenient way online debugging.
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. The e
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The...
no odor finely drilled tough including power pad. Clean hole
Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties of commercial scales by single load cell.
This set of jumper wires can help you remove the clutter on your breadboard. It comes in 14 different lengths and 8 colors to keep your circuit on the surface. All of them are pre-formed and pre-sorted. You can easily find the color and length you need within a sec. There are 10 pcs for each length including 2/5/7/10/12/15/17/20/22/25/50/75/100 and 125mm.
The RTC module is a member of Twig. It is based on the clock chip DS1307 which supports the I2C protocol.
This is Neodymium magnetic motor, High quality commutator and bigger brushs. With large output force and high speed, very suitable for making robot car.