• Out-of-Stock
640x384, 7.5inch E-Ink display HAT for Raspberry Pi, yellow/black/white,e-paper
search
  • 640x384, 7.5inch E-Ink display HAT for Raspberry Pi, yellow/black/white,e-paper
  • 640x384, 7.5inch E-Ink display HAT for Raspberry Pi, yellow/black/white,e-paper

640x384, 7.5inch E-Ink display HAT for Raspberry Pi, yellow/black/white,e-paper

€85.00
Tax included

640x384, 7.5inch E-Ink display HAT for Raspberry Pi, yellow/black/white

Overview

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Quantity
Out-of-Stock

Specifications

  • Operating voltage: 3.3V~5V
  • Interface: SPI
  • Outline dimension: 170.2mm × 111.2mm
  • Display size: 163.2mm × 97.92mm
  • Dot pitch: 0.255 × 0.255
  • Resolution: 640 × 384
  • Display color: yellow, black, white
  • Grey level: 2
  • Full refresh time: 16s
  • Refresh power: 38mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Interface

SYMBOLDESCRIPTION
VCC 3.3V~5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active

Dimensions

7.5inch e-Paper HAT dimensions

Development Resources

Wiki : www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(C)

EPAWSH75
New

You might also like