List of products by brand iTeadStudio

 2
Available
Arduino

Seeed Studio WiFi shield for Arduino (Arduino...

iTeadStudio
ASHSESWLS06201P
€45.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Seeeduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield. It features an independent antenna which can cover a wider range and transmit stronger signals. With supports for common TCP, UDP and FTP...
 2
Available
Arduino

2.4" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD24LCDTOUCH
€24.16
The 2.4”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
 2
Available
Display

Serial Graphic LCD 128*64 (ST7565/67 ctrl) -...

iTeadStudio
LCDITEDIS008
€19.15
Very high quality serial lcd with backlight, to add a graphic display to your project in minutes, without the need of much IO lines with fast refresh rate.
 2
Available
Dev. Tools

Iboard

iTeadStudio
MCBITEIBOARD
€33.00
Iboard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328. This board will add wireless XBee / nRF24L01+ control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless! Iboard can be used as an...
 2
  • Reduced price / -€1.67
Available
Dev. Tools

Iteaduino BT (Arduino-compatible with built-in...

iTeadStudio
MCB00001
€30.00 €31.67
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino Duemilanove, 100% compatible to its existing program, shield and IDE. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.
 2
  • Reduced price / -€2.00
Available
Display

Graphic LCD 128*64 (White on Blue) (screen)

iTeadStudio
LCDITE12864WB
€14.00 €16.00
This is a framed graphical LCD 64x128 with yellow or blue black-light . This unit is a very clear STN type LCD with a simple command interface.
 2
Available
Dev. Tools

Iboard Pro

iTeadStudio
MCBITEIBOARDPRO
€41.40
The Iboard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation...
 2
  • Reduced price / -€3.11
Available
Display

Nokia 5110 LCD (screen)

iTeadStudio
LCDNOK5110
€6.00 €9.11
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
 2
Available
Dev. Tools

nRF24L01+ 2.4Ghz RF module (improved range)

iTeadStudio
WIRITENRF24L01
€4.00
This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401+ and add some extra pipelines, buffers, and an auto-retransmit feature.
 2
Available
Electronics

GY-61 ADXL335 Accelerometer breakout module...

iTeadStudio
SENITEADXL335
€8.00
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
 2
Out of stock
Arduino

iTead WiFi shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITEWIFI
€50.00
This Wifi Shield utilizes a RN171 wifi module to provide your Arduino/Iteaduino with serial Ethernet's function. It only takes two pins to hook your device up to 802.11b/g wireless networks with this shield.
 2
  • Reduced price / -€5.00
Out of stock
Dev. Tools

nRF24L01+ with PA and LNA 2.4Ghz RF module...

iTeadStudio
WIRITENRF24L01PALNA
€7.00 €12.00
This is a long distance 2.4G wireless module which basic on nRF24L01+ chip, and there is the PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.
 2
Out of stock
Dev. Tools

BTBee (Bluetooth Bee, serial tu bluetooth module)

iTeadStudio
WIRITEBTBEE
€18.38
BTBee is an easy to use Bluetooth SPP module compatible with existing Xbee sockets, designed for transparent wireless serial connection setup. It can directly plug into the Bee sockets and use the UART port for Bluetooth communication.
 2
Out of stock
Dev. Tools

BT (Bluetooth) BLE Shield for Arduino

iTeadStudio
ASHITEBTBLE
€24.50
BLE shield is to adapt Bluetooth Low Energy to serial port, which is specifically designed for Arduino motherboard and compatible boards, plug and play.
 2
Out of stock
Electronics

Non Blind Zone Ultrasonic Module SDM-IO

iTeadStudio
SENITEUSRSDMIO
€14.50
Non Blind Zone Ultrasonic Module SDM-IO is a stable and measure the distance accurately ultrasonic module which provides 0cm - 1500mm non-contact measurement function,the ranging accuracy can reach to 3mm. Its performance can compare with SRF05/SRF02 ultrasonic distance measuring module, also it has non-blind design and fast response.
 2
Out of stock
Dev. Tools

iTead 3G shield for Arduino (Arduino Compatible)

iTeadStudio
ASHITE3G
€62.50
The 3G shield is based on SIM5216E module. The SIM5216 series is Multi-Band HSDPA/WCDMA/GSM/GPRS/EDGE module solution which supports HSDPA up to 3.6Mbps for downlink data transfer. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino.
 2
Available
Dev. Tools

PL2303 USB to UART (TTL) breakout

iTeadStudio
USBITEPL23035V
€4.08
It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port, an avr, an msp430 or an stm32 for example. It's very cheap compared to the ft232 alternative and works very well, up to more than 1mbit/s.
Out of stock
Bluetooth

BT (Bluetooth) Shield v2.2 for Arduino (Arduino...

iTeadStudio
ASHITEBT22SLA
€16.00
The Bluetooth Shield integrates a HC-05 Serial Bluetooth module. It can be easily used with Arduino for transparent wireless serial communication. You can choose two pins from Arduino D0 to D7 as Software Serial Ports to communicate with Bluetooth Shield (D0 and D1 is Hardware Serial Port).
 2
Available
Electronics

ULN2003 Stepper Motor Driver Board

iTeadStudio
MDRULN2003
€4.58
ULN2003 Stepper Motor Driver Board is use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motors (5v-12v).
 2
Available
Dev. Tools

433Mhz RF link kit

iTeadStudio
WIRITE433LINK
€3.92
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
 2
  • Reduced price / -€4.50
Available
Arduino

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
€8.00 €12.50
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
Out of stock
Dev. Tools

Raspberry PI LCD1602 Add-on

iTeadStudio
LCDRPI1602SHIELD
€12.00
Raspberry PI LCD1602 Add-on is customized for Raspberry Pi interfaces based on LCD1602 display module.
 2
Out of stock
Dev. Tools

Music Player Shield for Arduino (MP3, SD card,...

iTeadStudio
ASHITEMUSPLA
€20.00
The iTead Music Player Shield is based on CECL08D. The CECL08D chip can be used to decode MP3/WAV format audio file. The music player shield has SD card socket and USB interface, supporting USB and SD card play. Just plug and play!
 2
  • Reduced price / -€2.00
Available
Shields

ProtoScrewShield for Arduino (Arduino Compatible)

iTeadStudio
ASH00001
€8.00 €10.00
Your project uses external peripherals and needs them connected securely ? Don't look twice, and take that shield. You can add components on it as it has a 0.1" spaced through hole for standard dip components as well as stackable headers and screw headers.
 2
Out of stock
Display

COG 128x64 Graphic LCD module (controller...

iTeadStudio
LCDITEDIS020
€9.08
This is a GOG 128x64 Graphic LCD module (controller sed1565). It has an Yellow mode STN panel composed of 128 segments and 64 commons. The LCM can be easily accessed by microcontroller via parallel 6800 series interface.
 2
  • Reduced price / -€6.00
Available
Electronics

ADXL345 Accelerometer breakout module Triple-Axis

iTeadStudio
SENITEADXL345
€4.00 €10.00
The ADXL345 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale rangethe static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Available
Electronics

Battery Charging StepUp Power Supply Module...

iTeadStudio
POWSEDLITCHM
€3.00
The module is used for charging of single lithium battery or multiple lithium batteries in parallel, and the charging port can take power from the USB port. output USB micro usb input / usb output / and charging lipo
 2
Available
Electronics

RTC& EEPROM Module DS3231 AT24C32

iTeadStudio
SENSEDIICRTCDS3231
€5.50
    DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it function with a VCC ranging from 2.3V to 5.5V and has a battery backup. Unlike 
 2
  • Reduced price / -€20.00
Available
Dev. Tools

Iteaduino Plus A20 (ARM Linux board, Dual-core...

iTeadStudio
LINAA20ITEA
€55.00 €75.00
Iteaduino Plus is an open source ARM development board, which is based on Allwinner A20 SoC, small size, hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and more extension interfaces.
 2
Out of stock
Arduino

ITeaduino Nano USB Microcontroller

iTeadStudio
MCB00002C
€14.17
The Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Adruino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
Product added to wishlist
Product added to compare.