GP2Y1010AU0F Compact Optical Dust Sensor

SENDUSTGP2Y1010AU
€11.67
The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.

HackSpark
  1. All our products are shipped from France.
  2. A doubt about a purchase ? Return your items and get money back.
  3. We carefully choose and test the products we sell.

Overview

The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.

An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air.

The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.

For your convenience, ITEAD ship this sensor with a 6-pin, 1.5mm pitch mating connector and cable.

Specification

  • Supply voltage: 5-7V
  • Operating temperature: -10-65 Celsius degree
  • Consumption current:20mA max

Shipping List

  • Sharp GP2Y1010AU0F Dust Sensor   *1
  • Cable   *1
  • 150ohm resistor *1
  • 16v220uF capacitor *1
8 Items
New product
No reviews

Customers who bought this product also bought:

Available
Wires and Connectors

USB to TTL (UART) Cable

CONCBBUSBTTLCAB
€8.25
USB to TTL Cable, specialized for dev boards. 5V
Available
Dev. Tools

NodeMCU AMICA R2 (LUA/Arduino/Python, ESP-12E,...

WIRNODMCUR2
€6.25
“An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines” Based on ESP8266 ESP12E wifi board, on-board USB-TTL support directly flashing from USB port, also on-board power circuits and all IOs setup.
2
Available
Electronics

Electronic Brick Vibration Sensor Module for...

SENITETILT2
€2.00
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
2
  • Reduced price / -€4.00
Available
Electronics

Bread Board Power Supply Shield Micro USB...

ENEITEBREPOW
€3.50 €7.50
This is a power module for the standard bread boards (Small and Medium sized). It's concave design so will not wast your proto zone. It also supports both 5v and 3.3v (both can be enabled on each power rail). We think it is a must to have on your workbench, really.
2
Out of stock
Electronics

male female splittable jumper wires (300mm, 40...

CONSEDJMP40PMF
€5.00
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
View
Available
Wireless Connectivity

ESP-01S WiFi Serial Transceiver Module with...

SEDWIFSERTRNESP
€4.58
This is the pin compatible upgrded version of the ESP-01 chip. ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.   ESP8266 has...
Out of stock
Electronics

Grove – Air quality sensor

SENSESGROAIR
€16.00
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases.
View
Product added to wishlist
Product added to compare.