Your cartThere are no more items in your cart
GPIO Header 2x20 Female Header for Raspberry Pi A+/B+/Pi 2/Pi 3 -
This is a simple female header, very useful for a lot of things, including to plug boards like the Raspberry pi
2.4mm spacing, 2 row, 40 pins.
Customers who bought this product also bought:
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process. M5stickC is one of the core...
The 433M RF link kit is consisted of transmitter and receiver, popular used for remote control. 433MHz frequency and ASK modulation.
Simple heatsink kit for raspberry pi.
This laser pointer or laser pen is a small handheld device with a laser diode emitting a very narrow coherent low-powered laser beam of visible light, it is frequently used in lecture halls and demonstrations to point at topics of interest on a presentation board. In a school setting, they have become ubiquitous, and they are very useful teaching aids....
hs0038 IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 5V (although it seems to be OK down to 3.3V)To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn’t do any decoding of the signal, just passes the ‘raw data’ along.
USB Connector, MINI USB M, USB 2.0, Receptacle, 4 Way
This pack includes: 2 pcs 6-pin lengthen female headers 2 pcs 8-pin lengthen female headers They all have 2.54mm spacing between pins and they are the perfect height for clearing the USB-B connector and great for stacking multiple shields.Their long legs also make it enough to connect a shield to an Arduino Main Board.
It is a good plastic box for Raspberry Pi, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. The e