Your cart
There are no more items in your cart
8 LED WS2812 Stick (NeoPixel Compatible, Digital RGB LED with Integrated Drivers)
LEDNEO8BAR
€4.00
If you want to show a bar graph or any other kind of visual animation, this is one of the best values you can find. Those are 8x WS2812B 5050 leds soldered on a pcb stick, ready to use.
*Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.
*The control circuit and the LED share the only power source.
*Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel
point.
*Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not
accumulate.
*Built-in electric reset circuit and power lost reset circuit.
*Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color
display, and scan frequency not less than 400Hz/s.
*Cascading port transmission signal by single line.
*Any two point the distance more than 5m transmission signal without any increase circuit.
*When the refresh rate is 30fps, cascade number are not less than1024 points.
*Send data at speeds of 800Kbps.
*The color of the light were highly consistent, cost-effective..
Applications
*Full-color module, Full color soft lights a lamp strip.
*LED decorative lighting, Indoor/outdoor LED video irregular screen.
Package Included:
1pcs 8* WS2812 5050 RGB LED Module for Arduino
Conncetion:
- UNO R3 / WS2812
- 5V / 5V
- pin 6 / Data input
- GND / GND
Documents:
8 Items
New product
No reviews
Customers who bought this product also bought:
Home
60mm 8*8 LED Matrix - RGB (super bright)
LMA00001
€6.67
Common anode 60mm 8x8 RGB Matrix in all its eye-burning glory !
Tools
Clear Plastic Case for Arduino UNO R3 and...
CASARDUNOR3
€4.00
Nice little case shipped as a kit for your Arduino.
Electronics
male / female connection wires for sensor /...
CONSEDJMP3PMF
€3.25
male / female connection wires for sensor / servo (900 mm extension, 3 pins) (cable)
Electronics
5V USB Output Converter (DC 7V-24V To 5V 3A...
ENEDCUSBKIS3R33S
€4.08
5V USB Output Converter DC 7V-24V To 5V 3A Step Down Buck Module.
Ideal to get a strong and stable 5v usb output from any source from 7 to 24V.
Relays
4 Channel 5V Relay Module (5V, 250VAC/10A)
RELITD4CH5V
€8.00
This is a 4-Channel Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.
Electronics
Serial Port BLE Module (Master/Slave) : HM-10
WIRHM10
€8.92
If you are in need of such a 4.0 BLE Bluetooth module, MCU can be set up,also can controlled by a remote Bluetooth device for setting,can transfer data, and can remotely control 10 PIO pins,so,the best choice is HM-10 bluetooth module. can replace HC-05, HC-06, HC-07 etc.
Wires and Connectors
IDC-16M jack (AMPHENOL T821116A1S100CEU), the...
CONJANIDC16M
€0.58
IDC-16M jack the height is 2.54mm. / Maximum allowable current: 1A