Your cart
There are no more items in your cart
ST-Link V2 Compatible programmer- Mini Emulator Downloader Programming Unit STM8 STM32
PRGJANSTMV2
€5.50
This is a cheap usb programmer for STM8 and STM32.
Features:
- Support the full range of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address! Don't need to read instructions!
- Support the firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2. The J17. S4.
- Increase the 5 v power output, the output it can protect the I/O port, not afraid of error cause damage of ST - LINK V2!
- Easy interface to use pure copper plating 2.54 spacing horn, with 20 cm dupont line, can deal with different target board line sequence, flexible connection;
- Use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.
Support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported. Support the software version is as follows:
- ST - LINK Utility 2.0 and above
- STVD 2 and above
- STVP 3.2.3 and above
- IAR EWARM V6.20 and above
- IAR EWSTM8 V1.30 and above
- KEIL RVMDK V4.21 and above
5 Items
No reviews
Customers who bought this product also bought:
Electronics
male female splittable jumper wires (300mm, 40...
CONSEDJMP40PMF
€5.00
This is a splittable 40 pin male-female jumper wire, it is super flexible, can be transformed from 1-40 pin jumper wire. With some of these, you will no need to worry about the jumper wires you got before do not fit your project, just split it and go.
ESP32
M5Stack Basic Kit (ESP32 dev module, Wifi,...
MCBM5STKIT
€40.00
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
Display
Nokia 5110 LCD (screen)
LCDNOK5110
€6.00
€9.11
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
Dev. Tools
STM32 Nucleo-64 development board with...
MCBSTM32DISL452
€16.25
The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™Uno V3 connectivity support and the ST morpho headers allow to expand easily the functionality of the STM32...
Electronics
Waterproof Ultrasonic Module JSN-SR04T
SENJSNSR04T
€14.00
There are many ultrasonic ranger module on the market, but sometimes, these kind of sensor needs to work in conditions more than the Lab. This water proof ultrasonic sensor meets this requirement. It has a good performance and almost the same usage of HC-S04 module.
Electronics
0.1" (2.54mm) Male header 1 row / 40 pins
CONGENMAL40
€0.50
This is a simple male header, very useful for a lot of things, including to plug boards like the arduino on your protoboards.
Wires and Connectors
3P XH 2.54mm Female XH 2.54mm Male (80mm ) wire...
CONHX254-3P
€1.25
3P XH 2.54mm Female XH 2.54mm Male (80mm ) wire JST
Electronics
4 Channel Logic Level Converter Bi-Directional...
CNVJAN4CH
€2.00
he level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV' pin, low voltage (3.3V for example) to ‘LV', and ground from the system to the ‘GND' pin.
Dev. Tools
NodeMCU AMICA R2 (LUA/Arduino/Python, ESP-12E,...
WIRNODMCUR2
€6.25
“An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines” Based on ESP8266 ESP12E wifi board, on-board USB-TTL support directly flashing from USB port, also on-board power circuits and all IOs setup.
Electronics
8-channel Bi-directional Logic Level Converter...
CNVELD8CH
€4.33
This is a breakout board based on TXB0108 IC, the chip can provide bidirectional level shifting from any voltage to any voltage conversion, direction can be auto detected.