SIM800L GSM/GPRS Module

WIRELESIM800L
€20.00
This module power supply of 5V, computer debugging USB to TTL serial port. 800MA power supply output current , TTL serial port compatible with 3.3V and 5V MCU, the MCU can be connected directly.

IPX antenna interface can switch PCB antenna, glue stick antenna and sucker antenna.

SIM800L 4 frequency data communications, globally available.

You might also like

HackSpark
  1. All our products are shipped from France.
  2. A doubt about a purchase ? Return your items and get money back.
  3. We carefully choose and test the products we sell.

Feature:

  • The ultra-small size for a variety of cuff and embedded.
  • Using side slot design, easy to switch phone card when you design it within a case
  • IPX interface may optionally replace the antenna. Default PCB antenna, greatly reducing: the use of space.
  • board with gold board, in terms of performance more stable.
  • More stable because of the golden plated PCB
  • This module add protection devices that can be anti-reverse, anti-hypertension, reducing the board’s loss, suitable programs and learning.

Package includes SMA-IPX cable and Rod antenna.

Documentation please see on this page.

4 Items
New product
No reviews

Customers who bought this product also bought:

2
Available
Raspberry Pi

Raspberry Pi Camera V2

SENRPICAMV2
€27.00
The Raspberry Pi Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add - on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. The camera module connects to the Raspberry Pi board via the CSI connector which...
2
Available
Electronic basics

Combined 1660 Point Breadboard (2xMedium...

PCBFLY1660PT
€15.00
This is a standard solderless breadboard - three binding posts, 4 power buses, black aluminum plate backing. It works with a wide variety of wire gauges (29-20 AWG). With a total of 1660 tie in points, all pins are spaced by a standard 0.1".
2
Available
Arduino

CNC Shield for Arduino (GRBL Arduino Compatible)

ASHCNCGRBLKIT
€6.67
The Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4x A4988 or DRV8825 with this shield and an Arduino you can build all kinds of robotics or CNC projects including CNC routers, laser cutters and even pick&place machines. This is the KIT...
2
Available
Electronics

Breadboard Jumper Wires Set (140 PCs Pack)

CONBRBJMPWIR
€5.00
This set of jumper wires can help you remove the clutter on your breadboard. It comes in 14 different lengths and 8 colors to keep your circuit on the surface. All of them are pre-formed and pre-sorted. You can easily find the color and length you need within a sec.    There are 10 pcs for each length including 2/5/7/10/12/15/17/20/22/25/50/75/100 and 125mm.
Available
Electronics

4 Channel Logic Level Converter Bi-Directional...

CNVJAN4CH
€2.00
he level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV' pin, low voltage (3.3V for example) to ‘LV', and ground from the system to the ‘GND' pin.
2
Available
Electronics

2x8 Protoboard

PCBPROTO2X8
€1.25
no odor finely drilled tough including power pad. Clean hole
Available
Electronics

8-channel Bi-directional Logic Level Converter...

CNVELD8CH
€4.33
This is a breakout board based on TXB0108 IC, the chip can provide bidirectional level shifting from any voltage to any voltage conversion, direction can be auto detected.
Product added to wishlist
Product added to compare.