LCD

 2
Out of stock
Outils de dev.

Raspberry PI LCD1602 Add-on

iTeadStudio
LCDRPI1602SHIELD
12,00 €
Raspberry PI LCD1602 Add-on is customized for Raspberry Pi interfaces based on LCD1602 display module.
 2
  • Prix réduit / -10,00 €
Available
Affichage

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
30,00 € 40,00 €
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
Available
LEDs & Lampes

I2C LCD Adapter module for 1602 2004 LCD...

ADPJANIICI2C
4,17 €
This is an I2C adapter module, with a backlit LCD display used in 160,220,048. Used for Arduino robot board, to use I2C I / O board interface savings, convenient and simple.
 2
Out of stock
Affichage

COG 128x64 Graphic LCD module (controller...

iTeadStudio
LCDITEDIS020
9,08 €
This is a GOG 128x64 Graphic LCD module (controller sed1565). It has an Yellow mode STN panel composed of 128 segments and 64 commons. The LCM can be easily accessed by microcontroller via parallel 6800 series interface.
 2
Available
Affichage

UART Serial 16x2 Characters LCD (White on Blue)...

LCDITESERIAL1602
12,50 €
Character LCM screen is a common display device, we provide 16×2 with Blue black light LCD. But these LCD need more than 6 pins for controlling and you need to know the control register and time series. This one is a bit different, you just send the message and voilà ! Only two pins :)
 2
Out of stock
Affichage

Raspberry Pi 7” TouchScreen Display (Official)(...

LCDRPI7OFF
75,00 €
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal co nversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
 2
  • Prix réduit / -5,33 €
Out of stock
Outils de dev.

3.95" Raspberry Pi display (320x240, Compatible...

LCDRPI395
16,67 € 22,00 €
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
 2
Available
Affichage

Raspberry Pi 7” TouchScreen Display ( HDMI LCD,...

LCDWSH7P1024600
70,00 €
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 1024 x 600 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
 2
  • Prix réduit / -3,92 €
Available
Affichage

16x2 Characters LCD (White on Blue) (screen)...

LCD00001
4,00 € 7,92 €
This cheap 16x2 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
Available
Affichage

ITDB02 Arduino Shield (Arduino Compatible)

ASHITDB02
9,00 €
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino pins, for that reason, this Arduino shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
 2
Out of stock
Arduino

2.4" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD24LCDTOUCH
24,17 €
The 2.4”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
 2
  • Prix réduit / -35,00 €
Product available with different options
Impression 3D

Smart LCD Controller For RepRap Ramps 1.4 3D...

Electrogragon
RPRJANLCD3DP
15,00 € 50,00 €
    The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. . 
 2
Available
Affichage

Raspberry Pi 3.5” TouchScreen Display ( IC LCD,...

LCDWSH35P320480
26,00 €
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
 2
Out of stock
Affichage

OLED Display (128x64, 2 colours white/blue)...

LCDOLED3COLWB
10,00 €
Tiny OLED display with a crisp 128x64 resolution that supports a lot of control modes : I2C (2 wires), SPI 3 wires, SPI 4 wires, 8080, etc. depending on your needs. Supporting both 5v and 3.3v, this display can be used with an Arduino, a Raspberry Pi, an STM32 mcu, etc. Oh, and did I mention it was cheap, like in a really low price at a great quality ? It...
Out of stock
ESP32

M5Stack Basic Kit (ESP32 dev module, Wifi,...

MCBM5STKIT
30,00 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
 2
Out of stock
ESP32

M5Stack Fire Dev Kit (ESP32 dev module, 4mb...

MCBM5FDEVKIT
56,25 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not...
 2
Out of stock
ESP32

M5Stack BALA (Kit robotique ESP32 à...

MCBM5FDEVBALA
103,75 €
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
 2
Available
Accueil

Raspberry PI LCD Adapter Kit (for ITDB02 and...

CONRPILCDITDB02
3,60 €
To facilitate the use of Raspberry Pi and screen module to work together, we specifically developed a simple adapter board and customized a batch of 26-pin (2X13) cable . Simply insert the screen module into the adapter board, then connect the board and Raspberry Pi plate with cable, thus the hardware connection is done, saving the trouble of...
 2
Available
TFT LCD

2.4" Serial TFT LCD 240X320 Display SPI...

LCDGEN24ILI9341
11,67 €
This great little display boasting a 240X320 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer. 2.4" Serial TFT LCD 240X320 Display SPI (ILI9341)(Raspi...
 2
Available
Accueil

MD070SD 7" 16-Bit Parallel Bus TFT Module with...

LCDMD070SD
70,83 €
MD070SD adopts 8080 timing sequence with 16-bit parallel bus interface, resolution of 800 × 480, display panel with 16M color and integrated with 8-page video memory (the remaining memory could be used as extended memory). The interior of module utilizes CPLD + SDRAM mode to drive RGB interface display, which does not only realize conversion between the...
 2
Available
Home page products

M5STICKC IoT Arduino Basic Kit (ESP32-PICO Mini...

MCBM5STIKIT
20,83 €
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process. M5stickC is one of the core...
Product added to wishlist
Product added to compare.