LCD

 2
Available
Affichage

LCD IIC Interface Converter Board

MODJANBOARD1602
3,25 €
Simply the interface of 1602 to IIC, save more IOs, with this board you only need two IOs. This board is also supporting 2004A which is also available in our store.
 2
Available
Accueil

Raspberry PI LCD Adapter Kit (for ITDB02 and...

CONRPILCDITDB02
3,60 €
To facilitate the use of Raspberry Pi and screen module to work together, we specifically developed a simple adapter board and customized a batch of 26-pin (2X13) cable . Simply insert the screen module into the adapter board, then connect the board and Raspberry Pi plate with cable, thus the hardware connection is done, saving the trouble of...
 2
  • Prix réduit / -3,92 €
Available
Affichage

16x2 Characters LCD (White on Blue) (screen)...

LCD00001
4,00 € 7,92 €
This cheap 16x2 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
  • Prix réduit / -3,92 €
Available
Affichage

16x2 Characters LCD (White on Green) (screen)

LCD00001G
4,00 € 7,92 €
This cheap 16x2 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
Available
LEDs & Lampes

I2C LCD Adapter module for 1602 2004 LCD...

ADPJANIICI2C
4,17 €
This is an I2C adapter module, with a backlit LCD display used in 160,220,048. Used for Arduino robot board, to use I2C I / O board interface savings, convenient and simple.
 2
  • Prix réduit / -3,11 €
Available
Affichage

Nokia 5110 LCD (screen)

iTeadStudio
LCDNOK5110
6,00 € 9,11 €
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
 2
Available
Affichage

16x1 Characters LCD (screen)

LCD00002
7,92 €
This cheap 16x1 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
  • Prix réduit / -4,50 €
Available
Arduino

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
8,00 € 12,50 €
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
Available
Affichage

ITDB02 Arduino Shield (Arduino Compatible)

ASHITDB02
9,00 €
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino pins, for that reason, this Arduino shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
 2
Available
Affichage

20x4 Characters LCD (White on Blue) (screen)

LCD2004WB
9,00 €
This cheap 20x4 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
Out of stock
Affichage

COG 128x64 Graphic LCD module (controller...

iTeadStudio
LCDITEDIS020
9,08 €
This is a GOG 128x64 Graphic LCD module (controller sed1565). It has an Yellow mode STN panel composed of 128 segments and 64 commons. The LCM can be easily accessed by microcontroller via parallel 6800 series interface.
 2
Out of stock
Affichage

OLED Display (128x64, 2 colours white/blue)...

LCDOLED3COLWB
10,00 €
Tiny OLED display with a crisp 128x64 resolution that supports a lot of control modes : I2C (2 wires), SPI 3 wires, SPI 4 wires, 8080, etc. depending on your needs. Supporting both 5v and 3.3v, this display can be used with an Arduino, a Raspberry Pi, an STM32 mcu, etc. Oh, and did I mention it was cheap, like in a really low price at a great quality ? It...
 2
  • Prix réduit / -2,50 €
Available
TFT LCD

2.2" Serial TFT LCD Display (SPI, 176X220,...

LCDGEN22ILI9341
10,00 € 12,50 €
This great little display boasting a 176X220 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
 2
Out of stock
Outils de dev.

ITDB02 Arduino Mega Shield (Arduino Compatible)

ASHITDB02MEG
11,00 €
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino Mega pins, for that reason, this Arduino MEGA shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
 2
Available
TFT LCD

2.4" Serial TFT LCD 240X320 Display SPI...

LCDGEN24ILI9341
11,67 €
This great little display boasting a 240X320 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer. 2.4" Serial TFT LCD 240X320 Display SPI (ILI9341)(Raspi...
 2
Out of stock
Outils de dev.

Raspberry PI LCD1602 Add-on

iTeadStudio
LCDRPI1602SHIELD
12,00 €
Raspberry PI LCD1602 Add-on is customized for Raspberry Pi interfaces based on LCD1602 display module.
 2
Available
Affichage

UART Serial 16x2 Characters LCD (White on Blue)...

LCDITESERIAL1602
12,50 €
Character LCM screen is a common display device, we provide 16×2 with Blue black light LCD. But these LCD need more than 6 pins for controlling and you need to know the control register and time series. This one is a bit different, you just send the message and voilà ! Only two pins :)
Product added to wishlist
Product added to compare.