LCD

 2
Out of stock
ESP32

M5Stack BALA (Kit robotique ESP32 à...

MCBM5FDEVBALA
103,75 €
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
 2
Out of stock
Affichage

Raspberry Pi 7” TouchScreen Display (Official)(...

LCDRPI7OFF
75,00 €
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal co nversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
 2
Available
Accueil

MD070SD 7" 16-Bit Parallel Bus TFT Module with...

LCDMD070SD
70,83 €
MD070SD adopts 8080 timing sequence with 16-bit parallel bus interface, resolution of 800 × 480, display panel with 16M color and integrated with 8-page video memory (the remaining memory could be used as extended memory). The interior of module utilizes CPLD + SDRAM mode to drive RGB interface display, which does not only realize conversion between the...
 2
Available
Affichage

Raspberry Pi 7” TouchScreen Display ( HDMI LCD,...

LCDWSH7P1024600
70,00 €
The 7” Touch screen Monitor for Raspberry Pi gives users the ability to create all - in - one, integrated projects such as tablets, infotainment systems and embedded projects. The 1024 x 600 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a...
 2
Out of stock
ESP32

M5Stack Fire Dev Kit (ESP32 dev module, 4mb...

MCBM5FDEVKIT
56,25 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not...
 2
  • Prix réduit / -30,00 €
Out of stock
Outils de dev.

Raspberry Pi 5” LCD Display HDMI w/touch 800×480

LCDRPI5TCH
45,00 € 75,00 €
Very nice display compatible with Raspberry Pi 3 B, 2 B, 1 A+ and B+. It fits easily and has a very good response time thanks to its HDMI interface. This is the only one we've seen to boast this interface while still being a plug-in cape/shield. Setup time is quite fast, you just have to set the resolution in the config.txt of your raspberry pi and voilà...
 2
Out of stock
Affichage

Case for Raspberry Pi Official 7" Touchscreen

CASEOND7LCD
42,00 €
Our black case houses a 7 inch Raspberry Pi Touch Screen and an attached Raspberry Pi board (neither of which are included), to provide you with a protective and presentable LCD device.
 2
Out of stock
Outils de dev.

ESP32-WROVER-KIT

MCBESP32WROVER
41,67 €
ESP-WROVER-KIT ESP-WROVER-KIT targets the high performance requirements with 4.5 MB of RAM and a dual core 240 MHz CPU. Create Internet cameras, smart displays or Internet radios with this highly integrated ultra low power module by connecting LCDs, cameras, microphones and codecs to it. Have fun!
 2
Available
Affichage

1.5" Color OLED (SSD1351, 128x128)

OLEJANCOL15
32,50 €
It is a nice and simple color 1.5" oled module with nearly no borders. What more could we ask for ?
Out of stock
ESP32

M5Stack Basic Kit (ESP32 dev module, Wifi,...

MCBM5STKIT
30,00 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
 2
  • Prix réduit / -10,00 €
Available
Affichage

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
30,00 € 40,00 €
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
Available
Affichage

Raspberry Pi 3.5” TouchScreen Display ( IC LCD,...

LCDWSH35P320480
26,00 €
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
 2
Out of stock
Arduino

2.4" TFT Touch shield for Arduino (Arduino...

iTeadStudio
ASHITELCD24LCDTOUCH
24,17 €
The 2.4”TFT with Touch Shield is designed for all the Arduino compatible boards. It works in 3.3V voltage level (but with necessary switches from arduino 5v). It can be directly plugged on the Arduino and other compatible boards. It will offer the display, touch and storage function for the Arduino board.
 2
Available
Home page products

M5STICKC IoT Arduino Basic Kit (ESP32-PICO Mini...

MCBM5STIKIT
20,83 €
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process. M5stickC is one of the core...
 2
Available
Affichage

2.8" Serial TFT LCD Display (SPI, 240x320,...

LCDELE28ILI9341
19,90 €
This great little display boasting a 320x240 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
 2
Available
Affichage

Serial Graphic LCD 128*64 (ST7565/67 ctrl) -...

iTeadStudio
LCDITEDIS008
19,15 €
Very high quality serial lcd with backlight, to add a graphic display to your project in minutes, without the need of much IO lines with fast refresh rate.
 2
  • Prix réduit / -5,33 €
Out of stock
Outils de dev.

3.95" Raspberry Pi display (320x240, Compatible...

LCDRPI395
16,67 € 22,00 €
This TFT LCD is designed for RPI, you can design it for many other things. It is play and plug, very easy and good item for your raspberry pi project and just simple connect to Raspberry Pi, you can start you Raspberry pi experience.
 2
  • Prix réduit / -35,00 €
Product available with different options
Impression 3D

Smart LCD Controller For RepRap Ramps 1.4 3D...

Electrogragon
RPRJANLCD3DP
15,00 € 50,00 €
    The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. . 
 2
Available
Affichage

Grove - OLED Display 128*64 (screen)

Seeed Studio
OLEDSEDDISP12
14,17 €
LED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It has bigger screen and uses all the columns from the...
Out of stock
Affichage

Grove - OLED Display 96*96 (screen)

Seeed Studio
OLEDSESOLE42178P
14,17 €
Twig/Grove - OLED 96x96 twig is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Twig - OLED 96x96 is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim / thin outline,...
 2
  • Prix réduit / -2,00 €
Available
Affichage

Graphic LCD 128*64 (White on Blue) (screen)

iTeadStudio
LCDITE12864WB
14,00 € 16,00 €
This is a framed graphical LCD 64x128 with yellow or blue black-light . This unit is a very clear STN type LCD with a simple command interface.
 2
  • Prix réduit / -4,50 €
Available
Prototypage

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
8,00 € 12,50 €
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
Product added to wishlist
Product added to compare.