ESP

 2
Available
Outils de dev.

Esp-Wroom-32 ESP32 WiFi BT Module 18650 Battery

MCBESP32B18650
12,50 €
Lorsque vous faites des projets esp32, vous devez détester d'ajouter une batterie externe pour fournir l'alimentation. Ce petit circuit pourrait résoudre de tels problèmes.
 2
Out of stock
Outils de dev.

DevKitC NodeMCU-ESP-WROOM-32U, Wifi and...

WIRELE32DEVKITU
12,50 €
ESP32-DevKitC is a low-footprint, minimal system development board which is powered by our latest ESP-WROOM-32U module and can be easily adjusted to a breadboard.
 2
Available
Outils de dev.

LoRa Module 868MHz M5stack

MCBM5PLOR868
16,25 €
LoRa868 is a LoRa communication module in the M5Stack stack module series (working frequency is 868MHz). A certain expansion space is reserved on the module, which defeats you for more functional design. For wireless communication or projects with more customized elements, the LoRa868 module will be a suitable choice.
 2
Out of stock
ESP32

32bit RISC-V M5Stamp C3U KIT avec...

MCBM5STSTAC3U
7,50 €
Description M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3U RISC-V MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption,...
 2
Out of stock
ESP32

M5Stack Faces Kit Pocket Computer with...

ESPM5SFACE
102,92 €
La description Le kit FACES est une série d'intégration de panneaux fonctionnels contenant trois panneaux d'intégration les plus couramment utilisés contenant les trois panneaux les plus couramment utilisés "GameBoy", "Calculatrice" et "QWERTY". Avec le processeur MEGA328 intégré, il fonctionne en mode esclave via le protocole de communication I2C. Avec...
 2
Available
ESP32

M5Stack Core2 ESP32 IoT Development Kit for AWS...

ESPM5SCORE210
52,50 €
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board...
 2
Available
ESP32

C050 ESP32-PICO-D4, Microcontrôleur M5Stamp...

M5STSTAMPPICO
5,50 €
STAMP-PICO présente une conception ultra-compacte avec deux microprocesseurs Xtensa® 32 bits LX6 basse consommation à 240 MHz sur un circuit imprimé aussi petit et délicat qu'un timbre-poste. faible consommation d'énergie. Il est idéal pour tous les appareils à espace restreint ou alimentés par batterie tels que les appareils portables, les appareils...
 2
Available
ESP32

M5Stack Tough ESP32 IoT étanche Development...

MCBM5STTOU34
49,17 €
Le contrôleur intégré M5Stack ** étanche ESP32 TOUGH ** est un contrôleur intégré programmable de qualité industrielle doté d'un chipset Espressif ESP32 avec Wi-Fi intégré, il est équipé d'un microprocesseur double cœur Xtensa® 32 bits LX6 avec une fréquence d'horloge jusqu'à 240 MHz. Une combinaison de mémoire PSRAM 8M + 16M FLASH, panneau d'affichage HD...
 2
Available
ESP32

Carte de développement M5Stamp C3U avec...

MCBM5STSTAMP
6,92 €
Description M5Stack just added a new family to its popular series of modules with the Stamp-C3. the new Stamp-C3 featuring ESPRESSIF ESP32-C3 RISC-V MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for IoT edge devices such as home appliances and Industrial Automation. By combining RSA-3072-based secure boot and the AES-128-XTS-based flash encryption,...
 2
Out of stock
Outils de dev.

U117 - LoRaWAN 868MHz ASR6501 avec antenne,...

MCBM5PCLOR868G
14,08 €
Unit LoRaWAN868 is a LoRaWAN communication module suitable for 868MHz frequency launched by M5Stack. The module adopts the ASR6501 scheme, which supports long-distance communication and has both ultra-low power consumption and high sensitivity. The module integrates the LoRaWAN protocol stack and adopts a serial communication interface (using the AT...
 2
Out of stock
Outils de dev.

M5stack A077 - Kit électronique de prototypage...

MCBM5STPROT
3,75 €
ATOMIC est un kit DIY Proto spécialement conçu pour la série Atom, ce qui permet aux utilisateurs de concevoir eux-mêmes de petits circuits ou du matériel externe. Il peut être empilé avec Atom directement via les 9 broches de la base. Deux cartes proto vierges sont fournies dans le kit, chacune offrant plus de 60 positions de trous pour répondre aux...
 2
Available
Outils de dev.

M5stack A086 - Kit adaptateur ATOM MATE DIY

MCBM5STMAT
3,25 €
ATOM MATE est un kit d'extension DIY spécialement conçu pour la famille M5ATOM. Le kit contient 3 types d'accessoires. AtomPin est une carte adaptateur de broches qui peut étendre les broches inférieures du M5Atom de tous les côtés, ce qui facilite la création de circuits sur la planche à pain. Avec un support spécial, vous pouvez facilement attacher...
 2
Out of stock
ESP32

M5stack ATOM TailBat - Accessoire de batterie...

MCBM5STTAILB
6,63 €
TailBat is an external battery accessory designed for M5ATOM. If the TailBat module is inserted into the M5ATOM,it can directly supply power to the , enabling the M5ATOM to be used in mobile applications. The TailBat contains a 190mah battery and features a physical button. It is controlled by the power management chip IP5303. When the power is turned on,...
 2
Out of stock
ESP32

M5Stack K033 - Kit robot BugC sans M5StickC

MCBM5SBUGC
14,58 €
DescriptionBugC is a programmable robot base compatible with the M5StickC. This has four DC motors, motor driver, two RGB LEDs, battery holder and a switch. The Bugc base needs to be used in conjunction with the M5StickC controller. The base comes with an STM32F030F4 micro controller which controls all the motors and LEDs and this is controlled through...
 2
Available
Outils de dev.

M5STACK-POE-CAMERA-W-O-WI-FI-OV2640

SENM5SCAM2640RJ
40,00 €
La descriptionPoECAM est une caméra open source entièrement programmable intégrant PoE (Power Over Ethernet). Cet article est une webcam basée sur ESP32 avec un contrôleur Ethernet intégré W5500 et un capteur d'image pixel 200w OV2640. PoECAM équipé d'une combinaison de 8 Mo de PSRAM + 16 Mo de mémoire Flash. Ce tout petit avec une alimentation flexible,...
 2
Available
ESP32

M5STICKC plus IoT development module Kit...

MCBM5STIKITP
24,92 €
M5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototying. Developing with M5StickC PLUS takes...
 2
Out of stock
Outils de dev.

M5Stack U017 - Module caméra PSRAM OV2640 avec...

SENM5SCAM2640
15,00 €
La description M5Camera est une carte de développement pour la reconnaissance d'images. Il dispose d'une puce ESP32 (4M Flash + 520K RAM) et d'un appareil photo de 2 mégapixels (OV2640). M5Camera offre beaucoup de stockage, avec une PSRAM supplémentaire de 4 Mo. Il prend également en charge la transmission d'images via Wi-Fi et le débogage via le port...
 2
Out of stock
ESP32

M5Stack BALA2 K014-C (Kit robotique ESP32 à...

MCBM5FDEVBALA
62,50 €
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
 2
Available
Outils de dev.

M5Stack COM.LoRaWAN Module 868MHz (ASR6501)

MCBM5PCLOR868
27,08 €
Description COM.LoRaWAN is a LoRaWAN communication module in the M5Stack stackable module series, supporting node-to-node or LoRaWAN communication. The LoRaWAN module based on ASR6501 encapsulates the PSoC4000 and SX1262 chips, supports the 868MHz frequency band, is based on an ultra-low power design, and consumes very low current (3.5μA) in deep sleep...
 2
Available
ESP32

M5STACK JoyC (W/O M5StickC) Omni-directional...

MCBM5STAJOYC
15,42 €
JoyC is a rocker module designed for the M5StickC.It supports two-hand operation. Embedded STM32F030F4 main control chip, using I2C communication protocol and host M5StickC for data transmission. The range of the joystick is 0~200, there are 12 RGB LEDs under the left and right joysticks, and the bottom of the joystick is equipped with a 16340 battery...
 2
Out of stock
ESP32

M5Stack ATOM Lite ESP32 Pico Development Kit

MCBM5STATPL
10,42 €
M5Stack ATOM Lite ESP32 Development Kit features a 240MHz dual-core ESP32-PICO chip that comes integrated with Wi-Fi and Bluetooth® technologies. The board has a 4MB of integrated SPI flash memory and provides Infra-red LED, buttons, and HY2.0 interface. This ATOM lite board provides more GPIOs for customization that are suitable for embedded smart home...
 2
Available
ESP32

M5Stack K036-B - Kit robot Rover C Pro sans...

MCBM5FDEVROV
63,00 €
Le RoverC est une base de robot mobile programmable et omnidirectionnelle compatible avec le M5stickC, et peut être démarré en insérant le M5stickC. Le contrôleur principal de la base est le microcontrôleur stm32f030f4. La base est fournie avec des moteurs à engrenages à vis sans fin N20 qui sont directement commandés par un driver de moteur à quatre...
 2
Available
ESP32

M5Stack Core2 ESP32 IoT Development Kit SKU: K010

MCBM5STKITC2
54,17 €
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores. The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board...
 2
Available
ESP32

M5Stack ATOM Matrix ESP32 Development Kit

MCBM5STATP
15,00 €
M5Stack ATOM Lite ESP32 Development Kit features a 240MHz dual-core ESP32-PICO chip that comes integrated with Wi-Fi and Bluetooth® technologies. The board has a 4MB of integrated SPI flash memory and provides Infra-red LED, RGB LED, buttons, and HY2.0 interface. This ATOM lite board provides more GPIOs for customization that are suitable for embedded...
 2
Out of stock
ESP32

M5stack ESP32 GRAY Development Kit with 9-Axis...

MCBM5STKITG
40,00 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
 2
Available
Outils de dev.

NodeMCU Lua Lolin V3 Module ESP8266 ESP-12F...

WIRNODMCUV3
8,25 €
“An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines” Based on ESP8266 ESP12E wifi board, on-board USB-TTL support directly flashing from USB port, also on-board power circuits and all IOs setup.
 2
Out of stock
Outils de dev.

T-Camera ESP32 WROVER Wifi / BT Camera Module,...

SENM5SCAMPIR
27,08 €
The  T-Camera is basically a combination of the ESP CAM, the ESP EYE, and an OLED display. It doesn’t end there, and it also includes a BME280 environmental sensor for sensing temperature, humidity, and pressure. Also, you got a PIR sensor for motion sensing and an optional fisheye lens for the camera. Application of the T-Camera is limited by the user,...
Available
ESP32

M5STICKC IoT Arduino Basic Kit (ESP32-PICO Mini...

MCBM5STIKIT
19,58 €
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process. M5stickC is one of the core...
 2
Out of stock
ESP32

M5Stack Fire Dev Kit (ESP32 dev module, 4mb...

MCBM5FDEVKIT
54,17 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not...
 2
Available
Electronique

ESP8266 ESP-07S based Serial to WiFi module...

WIRESP8266107S
4,58 €
Description This is the upgradation of ESP-07 Wifi Board. Description: Passed FCC CE RoHS certification Semi-hole chip technology All IO leads out With metal shielding shell IPX external antenna, don’t have build in antenna 16mm * 17mm * 3mm Change module uses a capacity of 4MB Package is SOP-208mil of SPI Flash  Pin compatible with esp-12, IPEX connector...
 2
Available
Outils de dev.

M5Stack ESP32CAM Camera Module, ESP32 + OV2640

SENM5SCAM
12,00 €
Description Description The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core. The ESP32CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. It also features a LiPo charger (IP5306) , so your ESP32CAM project can be...
 2
Out of stock
ESP32

Carte de dév. Wifi Lora 32 (ESP32, OLED, Lora...

MCBLOR32OLED
20,00 €
Dotée du wifi et du bluetooth grace à son ESP32, et du LORA en 433mhz cette petite carte de développement est idéale pour tous vos petits projets en mobilité. Elle a même un écran oled et un connecteur de batterie intégré.
 2
  • Prix réduit / -10,00 €
Available
Cartes principales

WIFI Mega 2560 R3 + ESP8266 (32MB RAM) USB-TTL...

MCB00004BW
22,00 € 32,00 €
Caractéristiques: Intégration complète sur une seule carte: Mega R3 ATmega2560 et WiFi ESP8266 avec mémoire 32 mo (mégaoctets) Tous les modules peuvent fonctionner ensemble ou chacun séparément. Et chacun a ses propres têtes de brochage La solution pratique pour le développement de nouveaux projets nécessitant Uno et WiFi Via USB, vous pouvez mettre à...
Available
ESP32

M5Stack Basic Kit (ESP32 dev module, Wifi,...

MCBM5STKIT
40,00 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
 2
Available
Electronique

ESP LED Strip Board ( ESP8266 Wifi IC, ESP-12F...

WIFELCESPRGB
10,00 €
a WiFi wireless switch that can connect to appliance of different types and brands. Sonoff sends data to cloud platform through the WiFi Router, which enables you to remotely control all appliances with the App eWeLink on your smart phone. Did we mention it's an ESP8266 on board ? that means you can reprogram it yourself and make your own firmware with a...
 2
Available
Outils de dev.

devKitC ESP32D NodeMCU ESP-WROOM-32D, Wifi and...

WIRELE32DEVKIT
10,00 €
ESP32-DevKitC is a low-footprint, minimal system development board which is powered by our latest ESP-WROOM-32 module and can be easily adjusted to a breadboard.
 2
  • Prix réduit / -6,10 €
Available
ESP32

Widora-AIR V6.0 (carte de développement ESP32,...

WIRNODMCUAIR
11,40 € 17,50 €
Widora-AIR V6.0 est une carte ESP32 (successeur de l'ESP8266 avec bluetooth) qui est très fine et peut être empilée sur une maquette. Vous pouvez commencer à prototyper votre application avec bluetooth 4.0 et wifi en quelques minutes. De plus, vous pouvez utiliser atom, arduino et d'autres ide pour développer pour cela dans une gamme de langages (C, C ++,...
 2
  • Prix réduit / -9,00 €
Available
Outils de dev.

D-DUINO OLED 0.96 (ESP8266, WIFI, 32bit mcu)

WIRNODMCUDDUINO
11,00 € 20,00 €
D-duino can be programed like Arduino. It has a display(0.96 inch OLED) so I call it D-duino. Also you can use LUA  control this board like NodeMCU. You can understand this is NodeMCU+OLED. I think the 0.96″ OLED will be very helpful for makers to develop IOT.
 2
Out of stock
Outils de dev.

ESP8266 Serial WiFi Shield for Arduino

SHLJANESP8266
15,75 €
The shield is designed based on esp8266 by Espressif Systems, pin-compatible with Arduino UNO/Mega2560 DevBorad. WiFi module is industrial-grade chips ESP8266, which is ESP-12E with metal shield, strong anti-interference ability; Shield is pin-compatible with Arduino Uno, Mega2560 and other control board. A voltage converter chip is used to deal with 3.3V...
 2
Available
Outils de dev.

Seeed Studio Sonoff RFR2 Wi-Fi Smart Switch

RELELDESP
10,42 €
The purpose of this design is for learning how to play with the hardware and software of a IOT project, it is based on price competitive wifi module ESP8266.
 2
Out of stock
Outils de dev.

Smart Socket WiFi EU Plug (ESP8266 dev. kit)

RELESP8266SOC
16,67 €
Instantly convert any plug into a connected and intelligent outlet with a convenient timer function that works both on your smart phone and has a manual control knob . Perfect for lighting and other appliance with pre-set ON/OFF functions . Control devices from anywhere . The App eWeLink enables you to control your devices easily. You can download the iOS...
 2
Available
Electronique

Wio Link (ESP8266, Grove and Battery charging...

MCBWIOLINK
17,50 €
Wio Link is designed to simplify your IoT development. It is an ESP8266 based open-source Wi-Fi development board to create IoT applications by virtualizing plug-n-play modules to RESTful APIs with mobile APPs. The traditional methodology of building IoT applications consists of electronic engineering, micro-controller programming, network programming,...
 2
Available
Accueil

ESP8266 ESP-13 based WiFi module (SPI, 32Mbit...

WIRESP826613
5,83 €
ESP-WROOM-02 is a 32-bit low power micro-controller (MCU) Wi-Fi Module that integrates TCP/IP network stacks, and includes 10-bit ADC with HSPI, SDIO, UART, PWM, I2C, and I2S interfaces. The module is highly integrated. It consumes extremely low power while providing wireless internet connection for embedded devices. It can be easily integrated into...
  • Prix réduit / -2,00 €
Out of stock
Outils de dev.

Wemos D1 (ESP8266, Arduino-compatible layout,...

MCBWEMD1
10,50 € 12,50 €
The D1 is an Arduino Uno-like wifi board based on ESP-8266EX. 11 digital input/output pins 1 analog input(3.3V max input) a Micro USB connection a power jack, 9-24V power input. Compatible with Arduino
 2
Available
ESP

ESP8266 ESP-12S based WiFi module FCC/CE/RoHS -...

WIRESP826612E
5,83 €
News ESP8266 improve the peripheral circuit, enhance the impedance matching, signal output is better, both stability and anti-interference ability, have been greatly improved. ESP8266 is a ultra-low power UART-WiFi module. It has excellent dimensions and ULP technology compared to other similar modules. The module is special design for monile devices and...
 2
  • Prix réduit / -0,42 €
Available
Accueil

ESP8266 Wifi Module ESP-201

WIRESP8266201
5,00 € 5,42 €
ESP8266 module ESP-201 with standard 2.54mm headers, making it almost breadboard friendly (alsmot as there as some pins that don't fit, but it can be fixed easily). Like the ESP-01 but dislike the few IO ? look no more, don't bother with smd board and try this one.
Out of stock
Outils de dev.

NodeMCU AMICA R2 (LUA/Arduino/Python, ESP-12E,...

WIRNODMCUR2
6,25 €
“An open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines” Based on ESP8266 ESP12E wifi board, on-board USB-TTL support directly flashing from USB port, also on-board power circuits and all IOs setup.
Available
Connectivité sans fil

ESP-01S WiFi Serial Transceiver Module with...

SEDWIFSERTRNESP
4,58 €
This is the pin compatible upgrded version of the ESP-01 chip. ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.   ESP8266 has...
Product added to wishlist
Product added to compare.