Electronic Brick

Available
Electronique

Grove - 200Cm Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED020MPIN4
4,17 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 200cm cables for different applications.
Available
Electronique

Grove - 300MM Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED03MPIN4
0,83 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 30cm cables for different applications.
 2
Available
Electronique

Grove - PRT-15109 - Câble adaptateur Grove...

GRVSEDPIN4
1,67 €
Rapide vue d'ensembleLe système SparkFun Qwiic Connect s'étendant chaque jour, nous voulons nous assurer qu'il devient aussi accessible que possible, mais nous comprenons qu'il existe d'autres systèmes qui peuvent le compléter. Le câble adaptateur Qwiic vers Grove permet l'interopérabilité entre le système SparkFun Qwiic Connect et les cartes Grove basées...
Out of stock
Electronique

Grove - Câbles de capteur M5Stack, A034-D, pour...

Seeed Studio
GRVSED1MPIN5
3,33 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 100cm cables for different applications.
Available
Electronique

Grove - Universal 4 Pin connector 90°

Seeed Studio
GRVSED4PIN90
0,50 €
The Universal 4 Pin connector is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping.
Available
Electronique

SW-520D Tilt Sensor Vibration Rolling...

SENANGTILT2
0,58 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Available
Electronique

Vibration Rolling Angle Sensor Electronic Tilt

SENANGTILT
0,42 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
 2
Available
Outils de dev.

SSC-32U USB 32 Servo Controller Atmega 328P

ECRACSPWM32
33,33 €
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
 2
Out of stock
Senseurs

Grove-Q Touch Sensor

GROSEETOUSEN
18,69 €
The Q Touch Sensor is a high sensitivity and high noise immunity touch input device
 2
Out of stock
Electronique

Module de détecteur de vibration (Vibration...

SENITETILT2
2,00 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Out of stock
Electronique

Grove - Universal 4 Pin Buckled 5cm (Cable)

Seeed Studio
GRVSED4PIN5
0,67 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm cables for different applications.
Out of stock
Electronique

Electronic Brick - Sound Sensor/Microphone Brick

SENITESNDMIC
2,50 €
Electronic brick of microphone can be connected to the analog I / O port, when speaking to the microphone, the analog value will be changed. A recorder can be made by reading and saving the analog value.
 2
Out of stock
Electronique

Electronic Brick & Grove - Tilt Sensor/Switch...

SENITETILT
2,50 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Available
Electronique

Encodeur rotatif droit vertical 20imp/rotation...

IHMROTENCBRICK
3,50 €
A simple rotary encoder for all your projects. It's like a potentiometer, but without end. It sends pulse to your microcontroller to let you know in which direction it turned. This version also has a button.
 2
Available
Outils de dev.

Sensor Shield V5.0 pour Arduino (servos)

ECRACS04525S
8,25 €
Latest Arduino sensor Shield V5.0 reserves advantages of Arduino Sensor V4.0,such as lamination design, PCB immersion god process, and main board extend all the figures and analog interfaces of Arduino controller. I2C interface, 32 steering engineer controller interface, Bluetooth module communication interface ,SD card module communication interface,...
Product added to wishlist
Product added to compare.