Break-out Boards

2
Available
Senseurs

CoreInk Proto Base M5stack

SENM5SINKPOT
5,75 €
CoreInk Proto Base is a DIY expansion kit suitable for CoreInk master control. When stacking the expansion board, the IO bus on the CoreInk main control will be led out to the PROTO board through the lower PIN pin. You can design and build the circuit according to your own needs. The package also contains a variety of expansion parts (HY2.0-4P female...
2
Available
Senseurs

M5stack Module RFID2 WS1850S GROVE

SENM5SRFID2
6,67 €
Description RFID2 is a radio frequency identification unit. Built-in WS1850S chip, working frequency is 13.56MHz. Supports reading card, writing card, recognition, recording, and encoding RF card Multiple functions such as authorization and authorization. Use magnetic field induction technology to realize non-contact two-way information interaction, read...
2
Available
Interface Homme-Machine

Shield Joystick pour Arduino UNO MEGA

ECRSMOLOYSHIELD
6,25 €
Ce shield livré prêt à l'emploi, est conçu pour être monté directement sur une carte Arduino® (non livrée). Il comprend 1 joystick, 4 boutons-poussoirs et 2 autres boutons-poussoirs miniatures. Idéal pour contrôler vos projets.
2
Available
Senseurs

M5STACK U107 - Unité de lecture RFID UHF JRD-4035

SENM5SRFIDUHF
70,00 €
Description UHF-RFID is an ultra-high frequency (UHF) embedded wireless radio frequency reader module. The JRD-4035 module solution with built-in ceramic antenna completely eliminates the technical uncertainty that ordinary UHF modules need to be equipped with additional antennas for users. Optimize the RF design to realize the low power consumption and...
2
Available
Electronique

MINI RTC MODULE (raspberry pi b/b+/Arduino)...

RTCRASPDS1302ZN
6,58 €
The RTC module is specifically designed for Raspberry Pi. It communicated with Raspberry Pi through I2C bus. There is a Maxim DS1307ZN+ and CR1220 button cell on the board to keep the real time for a long time after the Raspberry Pi has its power down. Set a serial port, TTL convenient way online debugging.
2
Out of stock
Electronique

M5STACK Isolated RS485 Unit grove

CONMSISORS485
8,25 €
La description L'unité RS485 isolée est un émetteur-récepteur semi-duplex isolé basé sur le protocole de bus RS485. Il peut convertir le niveau TTL en niveau RS485. Étant donné que divers bruits électriques et changements transitoires de tension et de courant peuvent affecter la communication, l'utilisation du CA-IS3082W comme puce d'interface peut...
View
2
Out of stock
Outils de dev.

4-Channel 16-Bit ADC for Raspberry Pi (ADS1115)...

ADASEEHAT1115
15,50 €
The analog-to-digital converter(ADC) is a common accessory for Raspberry Pi. This is a 4-channel ADC based on Texas Instrument's ADS1115, which is a precision, low-power, 16-bit ADC chip. We make this ADC into a compact Raspberry Pi Zero form factor and integrated an analog Grove connector so that you can also use analog Grove modules with it.
View
2
Available
Electronique

CD74HC4067 Module multiplexeur numérique...

CNMUL16CH
2,58 €
Il s'agit d'une carte de dérivation pour le très pratique multiplexeur / démultiplexeur analogique / numérique à 16 canaux CD74HC4067. Cette puce est comme un commutateur rotatif - elle achemine en interne la broche commune (COM dans le schéma, SIG sur la carte) vers l'une des 16 broches de canal (CHANxx). Il fonctionne avec des signaux numériques et...
2
Available
Outils de dev.

ENC28J60 Ethernet Network Module shield Nano V3...

NETENC28J60V3
11,67 €
It's a small breakout board for the ENC28J60 Ethernet chip. Contains all the necessary hardware to implement an Ethernet interface including the isolation transformer and ENC28J60 Ethernet Network Module shield Nano V3 Board
2
  • Prix réduit / -4,90 €
Available
Outils de dev.

SIM800L GSM/GPRS Module Arduino Uno, Arduino...

WIRELESIM800LA
11,68 € 16,58 €
SIM 800L est un module mini-GSM qui offre des données GSM 2G et GPRS. Désormais également en pack avec la carte SIM ThingsMobile. Le module a une petite taille et une faible consommation d'énergie. Deux fois la taille d'une pièce et 1 mA en mode veille. Il utilise une interface de communication série, prend en charge les commandes 3GPP TS 27.007, 27.005...
2
Available
Outils de dev.

FT232RL Tiny Breakout (USB FTDI UART TTL)

USBITD00001B
5,67 €
FT232RL breakout. The FT232RL is a USB to serial UART interface with optional clock generator output. It’s the essential tools for establishing communication between PC and mostly MCU. Especially, it’s the optimum tool for basic boards without without USB interface, like arduino pro, colorduino, etc.
2
Available
Electronique

CH375 USB Host USB-DEVICE / SLAVE Module...

CONUSBHID
7,08 €
CH375 est une puce d'interface universelle de bus USB, prend en charge le mode USB-HOST et le mode USB-DEVICE / SLAVE. Il y a un bus de données 8 bits et une lecture, une écriture, un fil de contrôle de sélection de puce et une sortie d'interruption dans CH375.Il est pratique de relier CH375 au bus système de contrôle de MCU / DSP / MPU.CH375 fournit...
2
Available
Electronique

8128 CCS811 + HDC1080 + BMP280 Gaz Température...

SENJAN8128
15,00 €
CCS811 + HDC1080 + BMP280 faible puissance Gaz Température et Humidité Hauteur Trois-en-un Capteur Module de surveillance la qualité de L'air intérieur
2
Available
Electronique

QFN / QFP / TQFP / LQFP 16-64 to DIP...

PCBITESMDADA1664
3,75 €
This is a QFN / QFP / TQFP / LQFP 16-64 to DIP Adapter/ Breakout Board, it can change QFN / QFP / TQFP / LQFP footprint IC into DIP breakout, then you can use then in prototype board or bread board.
Available
Electronique

BC-04 BK/ 05 Bluetooth R2 Prototype Breakout...

PCBELEBT5KIT
2,08 €
BC-04 K/ HC05 Bluetooth R2 Prototype Breakout Board Kit Description It is the bottom board of BC04-BK, support most common type bluetooth core board: BC04-B, EC04-B, support HC05 Features: Maxium input voltage 7V, LDO XC6206 Output pins: Key, TXD, RXD, 3V3, 5-7V, GND. Key is designed for BC04 to clear the pairing status, can connect to a push key. R2...
2
Available
Electronique

CJMCU LIS3DH Module d'accélération 3 axes...

SENJANLIS3DH
10,00 €
Le LIS3DSH a des pleines échelles sélectionnables dynamiquement de ± 2g / ± 4G / ± 6g / ± 8G / ± 16g, et il est capable de mesurer l'accélération à des débits de données de sortie de 3,125 Hz à 1,6 kHz.   La fonction d'auto-test permet à l'utilisateur de vérifier la fonctionnalité du capteur dans l'application finale.   L'appareil peut être configuré pour...
2
Out of stock
Electronique

RTC& EEPROM Module DS3231 AT24C32

iTeadStudio
SENSEDIICRTCDS3231
5,50 €
    DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it function with a VCC ranging from 2.3V to 5.5V and has a battery backup. Unlike the DS1307, the DS3231 also has an integrated crystal...
View
Available
Electronique

High Power Mosfet Drive Module, PWM Control

DRIELDHPW
2,92 €
Using brand new double MOS AOD4184A parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment; Wide voltage, the perfect support for PWM; Easy control of power equipment.
2
  • Prix réduit / -2,10 €
Available
Affichage

Kit horloge électronique LED avec DS1302 and...

KITJANLED
7,90 € 10,00 €
Kit horloge électronique LED avec DS1302 Nice little clock developement kit with a lot of leds and a nice display.
2
Product available with different options
Electronique

L9110 Fan Module for Arduino

MOTJANFAN
6,40 €
L9110 driver can control Reversible with mounting holes compatible steering rudder propeller control quality and high efficiency. 20cm making it easy to blow out the flame can be used outside of the fire lighter robot, robot design and development of essential
View
2
Available
Outils de dev.

SIM800L GSM/GPRS Module

WIRELESIM800L
20,00 €
This module power supply of 5V, computer debugging USB to TTL serial port. 800MA power supply output current , TTL serial port compatible with 3.3V and 5V MCU, the MCU can be connected directly. IPX antenna interface can switch PCB antenna, glue stick antenna and sucker antenna. SIM800L 4 frequency data communications, globally available.
2
Available
Affichage

LCD IIC Interface Converter Board

MODJANBOARD1602
3,25 €
Simply the interface of 1602 to IIC, save more IOs, with this board you only need two IOs. This board is also supporting 2004A which is also available in our store.
2
Available
Electronique

8-channel Bi-directional Logic Level Converter...

CNVELD8CH
4,33 €
This is a breakout board based on TXB0108 IC, the chip can provide bidirectional level shifting from any voltage to any voltage conversion, direction can be auto detected.
Available
Outils de dev.

CAN-BUS MCP2515 CAN Bus Module TJA1050 Receiver...

CANBUSSEDSHIELD
5,50 €
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus.
2
Available
Outils de dev.

LoNet - Mini GSM/GPRS/GPS Breakout

GSMGPSLONET
60,00 €
LoNet is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation. It features ultra-low power consumption in sleep mode and integran. The module is controlled by AT command via UART and supports 3.3V and 5V logical level....
Available
Electronique

Encodeur rotatif droit vertical 20imp/rotation...

IHMROTENCBRICK
3,50 €
A simple rotary encoder for all your projects. It's like a potentiometer, but without end. It sends pulse to your microcontroller to let you know in which direction it turned. This version also has a button.
2
Available
Prototypage

Adaptateur GPIO Raspberry PI B+ en T pour...

BRBRPIPLTCOB
4,00 €
Cet adaptateur vous permet d'avoir tous les pin du raspberry pi disponible directement sur votre breadboard (et alimenter celle-ci au passage).
2
Available
Electronique

MINI RTC MODULE (raspberry pi b/b+) DS1307

CLOFLYRTCRASP
8,00 €
The RTC module is specifically designed for Raspberry Pi. It communicated with Raspberry Pi through I2C bus. There is a Maxim DS1307 and CR1220 button cell on the board to keep the real time for a long time after the Raspberry Pi has its power down. Set a serial port, TTL convenient way online debugging.
Available
Electronique

3.3V/5V Logic Level Converter (2-channel...

ADATXRX335
2,42 €
If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. This logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level converter has the capability of converting 4 pins on the high side to 4...
2
Out of stock
Outils de dev.

AD9850 0-40MHz DDS Module

ADITAD9850
10,83 €
IC AD9850 is an ADI DDS chip which be common used in many DDS projects. This AD9850 DDS module is basic on this ADI AD9850 chip. This module provide you a ready made hardware and you can use serial or parallel pins on board to control the AD9850 for different frequency out put. The duty can be adjust by a adjustable resistor - which change the adjust...
View
Break-out Boards
Product added to wishlist
Product added to compare.