LCD

 2
  • Prix réduit / -3,92 €
Available
Affichage

16x2 Characters LCD (White on Blue) (screen)...

LCD00001
4,00 € 7,92 €
This cheap 16x2 characters lcd is perfect for use with an arduino or any other microcontroller to display data quickly. It is compatible with the Hitachi HD44780 lcd driver.
 2
Available
Affichage

Serial Graphic LCD 128*64 (ST7565/67 ctrl) -...

iTeadStudio
LCDITEDIS008
19,15 €
Very high quality serial lcd with backlight, to add a graphic display to your project in minutes, without the need of much IO lines with fast refresh rate.
 2
  • Prix réduit / -3,11 €
Available
Affichage

Nokia 5110 LCD (screen)

iTeadStudio
LCDNOK5110
6,00 € 9,11 €
Nokia 5110 LCD is a low-cost 84*48 pixels graphic LCD. It uses the PCD8544 controller. The PCD8544 interfaces to microcontrollers through a serial bus interface (5-wires).
 2
  • Prix réduit / -2,00 €
Available
Affichage

Graphic LCD 128*64 (White on Blue) (screen)

iTeadStudio
LCDITE12864WB
14,00 € 16,00 €
This is a framed graphical LCD 64x128 with yellow or blue black-light . This unit is a very clear STN type LCD with a simple command interface.
 2
  • Prix réduit / -5,10 €
Available
Prototypage

16x2 LCD Keypad shield for Arduino (Arduino...

iTeadStudio
ASH00003
7,40 € 12,50 €
This very popular LCD Keypad shield can be directly plug on an Arduino board, no soldering or fly-wiring needed.
 2
Available
Affichage

MD070SD 7" 16-Bit Parallel Bus TFT Module with...

LCDMD070SD
70,75 €
MD070SD adopts 8080 timing sequence with 16-bit parallel bus interface, resolution of 800 × 480, display panel with 16M color and integrated with 8-page video memory (the remaining memory could be used as extended memory). The interior of module utilizes CPLD + SDRAM mode to drive RGB interface display, which does not only realize conversion between the...
 2
  • Prix réduit / -2,50 €
Available
Affichage

2.2" Serial TFT LCD Display (SPI, 176X220,...

LCDGEN22ILI9341
10,00 € 12,50 €
This great little display boasting a 176X220 resolution has a wide support for all your MCU and little ARM/Linux-based boards. It will work on Arduino, STM32, Raspberry Pi and others.Oh, did I mention it also has an SD card slot ? Making it maybe one of the best value display we can have to offer.
 2
  • Prix réduit / -35,00 €
Product available with different options
Impression 3D

Smart LCD Controller For RepRap Ramps 1.4 3D...

RPRJANLCD3DP
15,00 € 50,00 €
    The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. . 
 2
  • Prix réduit / -10,00 €
Available
Affichage

E-Ink Display Shield for Arduino (Arduino...

Seeed Studio
ASHSESEINKDSP
30,00 € 40,00 €
Do you like Amazon Kindle’s E-paper screen? E-ink Display Shield, an E-paper & shield which uses exactly the same techniques, provides you a smooth and clear reading experience for you. It has a super-low power consumption. It won’t consume power until next refreshing of its screen, which enables it to maintain a clear display even in the power-off...
 2
Available
Affichage

ITDB02 Arduino Shield (Arduino Compatible)

ASHITDB02
9,00 €
The ITDB02 LCD modules works in 3.3V voltage level and are not compatible with Arduino pins, for that reason, this Arduino shield connects with these LCDs. Now you can directly plug the ITDB02 Series LCDs in the shield and stand on the Arduino board.
 2
Available
LEDs & Lampes

I2C LCD Adapter module for 1602 2004 LCD...

ADPJANIICI2C
4,17 €
This is an I2C adapter module, with a backlit LCD display used in 160,220,048. Used for Arduino robot board, to use I2C I / O board interface savings, convenient and simple.
 2
Available
Affichage

UART Serial 16x2 Characters LCD (White on Blue)...

LCDITESERIAL1602
12,50 €
Character LCM screen is a common display device, we provide 16×2 with Blue black light LCD. But these LCD need more than 6 pins for controlling and you need to know the control register and time series. This one is a bit different, you just send the message and voilà ! Only two pins :)
 2
Available
Affichage

LCD IIC Interface Converter Board

MODJANBOARD1602
3,25 €
Simply the interface of 1602 to IIC, save more IOs, with this board you only need two IOs. This board is also supporting 2004A which is also available in our store.
Out of stock
ESP32

M5Stack Basic Kit (ESP32 dev module, Wifi,...

MCBM5STKIT
30,00 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a small battery, an usb type c cable and jumper wires. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not included) and upcoming...
 2
Out of stock
ESP32

M5Stack Fire Dev Kit (ESP32 dev module, 4mb...

MCBM5FDEVKIT
56,25 €
This is one of the greatest kits available for the ESP32. Gives you a nice polished enclosure, a back module with connectors and a bigger battery, a charging host an usb type c cable and connecting bars. If you need to have a nice one shot product or a polished prototype using wifi and/or bluetooth, this is the kit you need. With the protoboards (not...
 2
Out of stock
ESP32

M5Stack BALA (Kit robotique ESP32 à...

MCBM5FDEVBALA
103,75 €
The M5Stack BALA is a balance bot based on M5Stack FIRE, including a 2 DC driver module based on Mega328p which is the core chip used on the Arduino UNO. You can even program The M5Stack BALA through Arduino or MicroPython with a few lines of code (or even visually with the web editor!). The 2 DC driver module communicates with M5Stack FIRE through I2C...
 2
Available
Home page products

M5STICKC IoT Arduino Basic Kit (ESP32-PICO Mini...

MCBM5STIKIT
20,83 €
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process. M5stickC is one of the core...
 2
Available
Affichage

1.5" Color OLED (SSD1351, 128x128)

OLEJANCOL15
32,50 €
It is a nice and simple color 1.5" oled module with nearly no borders. What more could we ask for ?
Product added to wishlist
Product added to compare.