Grove

Available
Electronique

Vibration Rolling Angle Sensor Electronic Tilt

SENANGTILT
0,42 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Available
Electronique

Grove - Universal 4 Pin connector 90°

Seeed Studio
GRVSED4PIN90
0,50 €
The Universal 4 Pin connector is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping.
Available
Electronique

SW-520D Tilt Sensor Vibration Rolling...

SENANGTILT2
0,58 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Out of stock
Electronique

Grove - Universal 4 Pin Buckled 5cm (Cable)

Seeed Studio
GRVSED4PIN5
0,67 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 5cm cables for different applications.
Available
Electronique

Grove - 300MM Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED03MPIN4
0,83 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 30cm cables for different applications.
 2
Available
Electronique

Grove - PRT-15109 - Câble adaptateur Grove...

GRVSEDPIN4
1,67 €
Rapide vue d'ensembleLe système SparkFun Qwiic Connect s'étendant chaque jour, nous voulons nous assurer qu'il devient aussi accessible que possible, mais nous comprenons qu'il existe d'autres systèmes qui peuvent le compléter. Le câble adaptateur Qwiic vers Grove permet l'interopérabilité entre le système SparkFun Qwiic Connect et les cartes Grove basées...
 2
Available
Electronique

Module de détecteur de vibration (Vibration...

SENITETILT2
2,00 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
 2
Available
Electronique

Electronic Brick & Grove - Tilt Sensor/Switch...

SENITETILT
2,50 €
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Out of stock
Electronique

Electronic Brick - Sound Sensor/Microphone Brick

SENITESNDMIC
2,50 €
Electronic brick of microphone can be connected to the analog I / O port, when speaking to the microphone, the analog value will be changed. A recorder can be made by reading and saving the analog value.
 2
Available
Grove

Grove - Multi Color Flash LED (5mm)

Seeed Studio
GROLED4C
2,92 €
PRODUCT DETAILS A general purpose LED module in Grove form factor, available in different colors. The ingenious PCB design enables you to bend the LED to any position you want, which makes it easy to use it standalone, horizontal or Panel Mount(from left to right in below pics)
 2
Available
Bases de l'électronique

M5stack Grove - Dual-Button Unit

GROVM5SBUT
3,08 €
La descriptionDual Button, comme son nom l'indique, a deux boutons de couleur différente. Si l'unité Button n'est pas suffisante pour les besoins de votre application, que diriez-vous de la doubler jusqu'à une paire ? Ils partagent exactement le même mécanisme, l'état du bouton peut être détecté par l'état de la broche d'entrée le niveau électrique...
 2
Available
Electronique

Grove - Buzzer

BUZSEDGROV
3,17 €
This is a simple yet enjoyable twig to use. The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones and effects.
Out of stock
Electronique

Grove - Câbles de capteur M5Stack, A034-D, pour...

Seeed Studio
GRVSED1MPIN5
3,33 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 100cm cables for different applications.
 2
Available
Affichage

Grove - Chainable RGB LED

Seeed Studio
MODSESGRORGBLED
3,50 €
Chainable RGB LED Twig is based on P9813 chip which is a full-color light source LED driver chip, can provide constant current drive and modulated output of 256 gray. Transmission by wire (DATA and CLK), built-in recycling, can enhance the transmission distance.
Available
Electronique

Encodeur rotatif droit vertical 20imp/rotation...

IHMROTENCBRICK
3,50 €
A simple rotary encoder for all your projects. It's like a potentiometer, but without end. It sends pulse to your microcontroller to let you know in which direction it turned. This version also has a button.
 2
Available
Electronique

M5STACK Grove U005 - Unité de potentiomètre...

POTM5S10K
3,83 €
DescriptionANGLE is a rotary switch Unit which simply includes a 10K Ohm potentiometer inside. This unit can be used for Continuous signal rotatory control for applications such as volume, brightness, or motor speed.A potentiometer is a manually adjustable variable resistor with three terminals: Two terminals are connected to a resistive element, the...
 2
Out of stock
Grove

Grove - Infrared Receiver

SEDGROIRREC
4,00 €
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which is used to get the infrared light emitted by the Infrared Emitter.
Available
Grove

Grove - Infrared Emitter

SEDGROIREMI
4,00 €
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side . An infrared LED is like any other LED, with its color centered around 940nm. We can use the emitter not only to transmit data or commands, but also to emulate remotes to control your home appliance...
 2
Out of stock
Bases de l'électronique

M5stack Grove Ultrasonic Distance Unit (RCWL-9600)

GROVM5SULTR
4,17 €
Description Ultrasonic is an ultrasonic distance measuring sensor unit, with the capability of simultaneous reception and transmission. The ultrasonic probe has a sound frequency of 40KHz, a direction angle of ±20 ° and an accuracy of 1mm. The internal part is calculated by an RCWL-9600 ultrasonic distance measuring chip, and the measurement results can...
  • Nouveau
Available
Electronique

Grove - 200Cm Câbles de capteur M5Stack, pour...

Seeed Studio
GRVSED020MPIN4
4,17 €
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to other Twig compatible boards for quick prototyping. As a lot of users ask for different length of cables, so we made the 200cm cables for different applications.
 2
Available
Bases de l'électronique

M5stack Grove Earth Moisture Sensor Unit Analog...

GROVM5SEARTH
4,17 €
Description EARTH unit is a Soil Moisture Sensor for measuring the moisture in soil and similar materials. The soil moisture sensor usage is pretty straight forward, the two large exposed pads function as probes for the sensor, together acting as a variable resistor. The higher moisture that is in the soil means the better the conductivity between the two...
 2
Available
Bases de l'électronique

M5stack Grove - PDM MEMS Microphone Unit (SPM1423)

GROVM5SPDM
4,58 €
Description PDM mini Unit is a digital MEMS silicon-based microphone based on PDM (Pulse Density Modulation) signal. The microphone has high signal-to-noise ratio, high sensitivity, low power consumption, anti-radio frequency interference, smooth frequency response and other characteristics. It automatically switches the microphone state according to the...
 2
Available
Bases de l'électronique

M5stack Grove RF UNIT 433MHz Transmitter (SYN115)

GROVM5433T
4,58 €
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
 2
Available
Bases de l'électronique

M5stack Grove RF UNIT 433MHz Receiver (SYN513R)

GROVM5433R
4,58 €
Description RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The exquisite and compact housing design can be embedded in...
 2
Out of stock
Bases de l'électronique

M5stack Grove Mini Infrared Emitter & Receiver...

GROVM5IR
4,58 €
Description IR is a pair of infrared photoelectric sensors from the M5Go Kit family. Contains 1x infrared emitter and 1x receiver. IR remote control is widely used in consumer electronics, it can be used to operate devices such as a television set, DVD player, or other home appliance, from a short distance. Since this unit comes with emitter and receiver,...
 2
Available
Grove

Grove - Barometer Sensor(BMP280) M5stack

BARM5SGRBMP180
5,00 €
Barometric Pressure Unit is a barometer unit, which integrates the Bosch BMP280 pressure sensor to measure atmospheric pressure and estimate the altitude. The relative accuracy can reach ± 0.12hpa, equivalent to ± 1m height difference. At the same time, the temperature drift coefficient is very low, which can reach 1.5 PA / K, that is, the temperature...
 2
  • Nouveau
Out of stock
Grove

M5stack Grove U090 - Capteur de pression...

BARM5SGRBMP280
5,00 €
L'unité de pression barométrique est une unité de baromètre qui intègre le capteur de pression Bosch BMP280 pour mesurer la pression atmosphérique et estimer l'altitude. La précision relative peut atteindre ± 0,12 hpa, ce qui équivaut à une différence de hauteur de ± 1 m. Dans le même temps, le coefficient de dérive en température est très faible, pouvant...
 2
Available
Cartes additionnelles (carte filles ou shields)

Grove Shield for Arduino Nano 33

Seeed Studio
BASSEDRONANO
5,42 €
Grove Shield pour Arduino Nano vous offre un moyen simple de vous connecter à Arduino Nano et également Seeeduino Nano. La version V1.1 prend en charge la carte de développement de la série Arduino Nano 33.
Available
Bases de l'électronique

Grove - Relay (3v dc / 250V at 10 amps.)

Seeed Studio
GROVSEEREL
5,42 €
The Relay is a digital normally open switch that controls a relay capable of switching 3V DC  3v dc / 250V at 10 amps.
 2
Available
Cartes additionnelles (carte filles ou shields)

Grove Shield for Pi Pico v1.0

Seeed Studio
BASSEDROPICO
5,42 €
Le Grove Shield pour Pi Pico v1.0 est un shield plug-and-play pour Raspberry Pi Pico qui s'intègre à différents types de connecteurs Grove, tels que les ports I2C, UART, numériques et analogiques. Il permet la construction de prototypes et de projets de manière simple et rapide sans soudure ni fil de connexion, vous pouvez explorer les possibilités...
 2
  • Nouveau
Available
Motorisé

M5STACK U102 - SG92R Unité de maintien, pince...

ECGM5STU102
5,75 €
Catch est une pince qui utilise un servo SG92R comme source d'alimentation. Le servo utilise un signal PWM pour entraîner l'engrenage de la pince pour faire tourner et contrôler la pince pour les opérations de serrage et de desserrage. La structure adopte un design compatible avec les trous ronds Lego 8mm. Vous pouvez le combiner avec d'autres composants...
 2
  • Nouveau
Available
Senseurs

M5stack Module RFID2 WS1850S GROVE

SENM5SRFID2
6,67 €
Description RFID2 is a radio frequency identification unit. Built-in WS1850S chip, working frequency is 13.56MHz. Supports reading card, writing card, recognition, recording, and encoding RF card Multiple functions such as authorization and authorization. Use magnetic field induction technology to realize non-contact two-way information interaction, read...
 2
Out of stock
Electronique

Grove - Speaker

SNDGROSPK
6,67 €
The Grove - Speaker is a module consist of power amplification and voice outputs. The loudness can be adjusted by the on-board potentiometer. With different input frequency, the loud-speaker generated different tones. Coding the music into arduino, DIY your own music box!
Out of stock
Electronique

Grove - 433MHz Simple RF link kit

SESWLS01052O
7,00 €
This kit is used for one way wireless communication at a frequency of 433MHz and includes a transmitter module and a receiver module. The twig configuration of this kit allows for around 40 meters of transmitting distance indoors, or around 100 meters outside.
 2
Out of stock
Electronique

Grove - Bee Socket

SEDGROBEESOCK
7,00 €
Grove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as WIFI Bee, RF Bee, Bluetooth Bee, etc. It is Arduino compatible and more effective to conduct peer-to-peer operations and mesh network runned by wireless modules. Regulator CJT1117 guareteens Xbee of stable 3.3 voltages. LEDs can reflect working modes...
 2
Product available with different options
Electronique

Grove - Vibration Motor

MOTSEDGROVE
7,08 €
It is consist one coin type motor which is a Permanent Magnet coreless DC motor. It vibrates when the input is logic HIGH. It is very easy to drive and Grove compatible. Can be used in toys and cell phone modules.
Product added to wishlist
Product added to compare.